Good day,
I need the USB serial Option driver and the QMI WWAN Driver for my raspberry using the following version: Linux Raspberrypi 5.15.32-v8
The one available “Quectel_Linux_USB_Serial_Option_Driver_V1.0.zip” contains versions up to 5.3.1 and for QMI WWAN is: Quectel_Linux&Android_QMI_WWAN_Driver_V1.1.zip
Thanks in advance for your help.
Regards,
Juan
Ok, I will send them to you via email, please check it.
Hi,
It’s is possible to have this version too :
Linux raspberrypi 5.15.32-v8+ #1538 SMP PREEMPT Thu Mar 31 19:40:39 BST 2022 aarch64 GNU/Linux
My email :
rfond@clauger.fr
Hi Isaac may i get them too please. Thanks
Hi,
It’s is possible to have this version too :
Linux 5.15
My email :
kaneyslayer@yahoo.com.tw
Hi,
Kindly share the driver for the following version too:
Linux raspberrypi 6.2.0-1004-raspi
email: bajwasarim@gmail.com
Thanks
Hello
can you please send me driver as well for raspberry:
Linux xxx 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 GNU/Linux
VERSION=“11 (bullseye)”
device is discovered as:
Bus 001 Device 012: ID 2c7c:0125 Quectel Wireless Solutions Co., Ltd. EC25 LTE modem
Email: atchik605@yahoo.ca
Thank you
2c7c:0125 is supported by standard Linux drivers for quite some time already.
Hi
thank you for quick response.
Strange…I am asking because system does not create /dev/cdc_wdm0 device although qmi_wwan is loaded, and /dev/ttyUSB2…4 are being created.
Please let me know if you have any suggestion where to look into.
Thank you
PS: the device is working fine with ubuntu 20.04 LTS and 22.04 LTS
Please show the output of cat /sys/kernel/debug/usb/devices
Hi
here , also dmesg:
pi@openplotter:~ $ sudo cat /sys/kernel/debug/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 6.01
S: Manufacturer=Linux 6.1.21-v8+ xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:01:00.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
D: Ver= 2.10 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2109 ProdID=3431 Rev= 4.21
S: Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 4
D: Ver= 2.10 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1
P: Vendor=2109 ProdID=2817 Rev=90.23
S: Manufacturer=VIA Labs, Inc.
S: Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=01 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
I:* If#= 0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
T: Bus=01 Lev=03 Prnt=03 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0125 Rev= 3.18
S: Manufacturer=Quectel
S: Product=EG25-G
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=(none)
E: Ad=89(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I:* If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T: Bus=01 Lev=03 Prnt=03 Port=03 Cnt=02 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=067b ProdID=23a3 Rev= 1.00
S: Manufacturer=Prolific Technology Inc.
S: Product=USB-Serial Controller
S: SerialNumber=DADWb113318
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=pl2303
E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=3151 ProdID=3020 Rev= 0.02
S: Manufacturer=YICHIP
S: Product=Wireless Device
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=(none)
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev= 6.01
S: Manufacturer=Linux 6.1.21-v8+ xhci-hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:01:00.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 4
D: Ver= 3.10 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=2109 ProdID=0817 Rev=90.23
S: Manufacturer=VIA Labs, Inc.
S: Product=USB3.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=13(Int.) MxPS= 2 Ivl=16ms
pi@openplotter:~ $
pi@openplotter:~ $ dpkg -l | grep qmi
ii libqmi-glib5:arm64 1.26.10-0.1 arm64 Support library to use the Qualcomm MSM Interface (QMI) protocol
ii libqmi-proxy 1.26.10-0.1 arm64 Proxy to communicate with QMI ports
ii libqmi-utils 1.26.10-0.1 arm64 Utilities to use the QMI protocol from the command line
pi@openplotter:~ $
[ 2590.726789] usb 1-1.1.1: new high-speed USB device number 7 using xhci_hcd
[ 2590.884905] usb 1-1.1.1: New USB device found, idVendor=2c7c, idProduct=0125, bcdDevice= 3.18
[ 2590.884925] usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2590.884931] usb 1-1.1.1: Product: EG25-G
[ 2590.884937] usb 1-1.1.1: Manufacturer: Quectel
[ 2590.891512] option 1-1.1.1:1.0: GSM modem (1-port) converter detected
[ 2590.891771] usb 1-1.1.1: GSM modem (1-port) converter now attached to ttyUSB1
[ 2590.892003] option 1-1.1.1:1.1: GSM modem (1-port) converter detected
[ 2590.892183] usb 1-1.1.1: GSM modem (1-port) converter now attached to ttyUSB2
[ 2590.892409] option 1-1.1.1:1.2: GSM modem (1-port) converter detected
[ 2590.892573] usb 1-1.1.1: GSM modem (1-port) converter now attached to ttyUSB3
[ 2590.892788] option 1-1.1.1:1.3: GSM modem (1-port) converter detected
[ 2590.892936] usb 1-1.1.1: GSM modem (1-port) converter now attached to ttyUSB4
[ 2590.899250] cdc_ether: probe of 1-1.1.1:1.4 failed with error -22
pi@openplotter:~ $
Your modem is in ECM mode but cdc_ether driver failed to probe the device.
If you want using QMI you need to switch the modem using AT+QCFG="usbnet",0 (through /dev/ttyUSB3)
thank you for the hint
overlooked, changed to usbnet 0
after few attempts I managed to connect to the network with mmcli.
I coulnt find how to send PIN with qmicli.
but this is a different story
thank you for being so responsive
appreciate it
Hi,
I have an EC25-AU module and a Raspberry Pi CM4 with kernel 6.1.0-rpi8-rpi-v8, could you send the drivers for the version mentioned?
My email: angelchampi2010@gmail.com