I have this module: [image] I am trying to update the firmware to the latest version using the Windows QGNSS V2 software. When I start the upload it asks me to reset the unit. I have tried connecting the RST pin to ground for 1 second but nothing happens. How do I start the firmware upload?

[image] Firmware Request: LC29HEA Adjustable Update Rate for Ardupilot Utilization Upgrade/Debug To operate the reset command (for the fw upgrade) on Mozihao boards, you need to ground pin_8 manually only for few seconds until qgnss_flash_tool_upgrade says ok, as the RST_t…

Unable to update firmware

IoT Modules GNSS Module

bamarcant February 13, 2025, 7:34am 3

P.s- note that BS version has not rtk engine.

1 Like