Testing with LG290P in Rover and Base station mode. Need some help

[splee]

You already have my email from another topic. Anyway, I’ve resolved all my issues so far and have got RTKBase working with the LG290P.

LG290P - Questions about it's behaviour in Base station mode

So, with some help from the RTKBase community, I was able to get RTKBase working with the LG290P. I was doing 99% of the things right but was missing one small detail, which I won’t mention, because it’s embarrasing! Basically execute the following commands on your LG290P after entering Base station mode from factory default: $PQTMCFGMSGRATE,W,RTCM3-1019,1*54 $PQTMCFGMSGRATE,W,RTCM3-1020,1*5E $PQTMCFGMSGRATE,W,RTCM3-1042,1*5A $PQTMCFGMSGRATE,W,RTCM3-1046,1*5E $PQTMCFGMSGRATE,W,GGA,1*0A $PQTMCF…

One issue that got me and you may want to update your document is that the PQTMCFGRTCM command to change the MSM message type does not take until a reboot.

Otherwise, thanks for your help, till the next question!