SA and NSA configurations being ignored in RM500-GL

Technical Subjects Software General Function
1

Hello, I have a quectel RM500-GL and 2 networks, one SA and another one NSA in the same bands and I cant choose which one I connect to.
I have tried commands such as:

at+qnwprefcfg="nr5g_disable_mode",2
at+qnwprefcfg="nr5g_band",78
at+qnwprefcfg="nsa_nr5g_band",0
at+cgdcont=1,"IP","SA_apn"

To force a connection to SA, the commands where saved because I can see these configurations with the read version of these commands.Its like the Quectel is just ignoring them and trying to filter by APN has also failed.
Device and firmware:

ati
Quectel
RM500Q-GL
Revision: RM500QGLABR11A06M4G
2

The 3GPP AT command to hard lock to a PLMN is:

AT+COPS=[<mode>[,<format>[,<oper>[,<AcT>]]]]

Eg,

AT+COPS=1,2,"50503",13

for PLMN 50503 and dual mode LTE and NR5G.

Change AcT from 13 to 12 for NR5G SA only.