Hello,
Following up on my 2025 request ( EM060 & RM520 firmwares ) — the
RM520N package I received was for a different baseline than my module, so I never flashed it.
Current versions (AT+QGMR):
- RM520N-GL:
RM520NGLAAR03A03M4G_01.201.01.201 - EM060K-GL:
EM060KGLAAR01A11M2G_01.202.01.202
Requests:
- Latest firmware for baseline R03A03 — I believe that is
RM520NGLAAR03A03M4G_A0.304.A0.304. If anything newer, I’m good with it too. - Latest EM060K-GL firmware. I see
EM060KGLAAR01A12M2G_A0.300.A0.300exists; mine is A11. - DFOTA delta packages rather than full Firehose images, if available.
Baseline question — in 2025 I was sent RM520NGLAAR03A01M4G_A0.300.A0.300 for a module that reports R03A03:
- Are R03A01 / R03A03 / R03A04 hardware-tied, or parallel software branches that can be cross-flashed on any RM520N-GL-AA?
- Is flashing an R03A04 package (e.g.
A0.301.A0.301) onto a module that shipped as R03A03 supported? R03A04 reportedly supports PC1.5, which is why I ask. - Release notes say no downgrade below
RM520NGLAAR01A07M4G_01.200.01.200. Does a cross-baseline flash count as a downgrade for the anti-rollback check? - Same question for EM060K A11 → A12.
Thanks.