RM500Q stuck in FTM

[stark4]

I have the FTM AT commands manual,it’s not working when key is 0

My situation is same as this one:

RM502Q-AE stuck in FTM

I found those commands here, but that’s for an older modem The following commands do exist, but also fail AT+QRFTEST=“mode” +QRFTEST:1 OK AT+QRFTEST=“mode”,0 +CME ERROR: 0 AT+QRFTESTNR5G=“mode” +QRFTESTNR5G:1 OK AT+QRFTESTNR5G=“mode”,0 +CME ERROR: 0