RG255C-GL operations and QLog debugging

Hi there,
I am trying to connect my RG255C-GL module to our 5G Network. However, even though the gNB is detected using AT+COPS=?, I am not able to register to the network neither manually or automatically.
The gNB is working on band n78 with 20MHz BW (30KHz subcarrier spacing and 51 PRBs).

Since the issue is quite strange to me, I am trying to debug it using QLogs. But, I am not able to capture any 5G debug packet, neither Qualcomm related messages, but only log configuration packets (this is what I see in QCat).

Before moving further, I would like to ask you if you can provide me with an updated documentation for 5G M.2 EVB v1.3 since the switch labels are different from v1.0 and I am not sure that I am operating the EVB card correctly.

Also, is it possible to get an updated version and relative configuration of QLog capable of working with this module?

Thank you for your help.

Dear @giulio.carota
If want to see the register message, it need QXDM to parse and QXDM need license.

However, even though the gNB is detected using AT+COPS=? , I am not able to register to the network neither manually or automatically.
The gNB is working on band n78 with 20MHz BW (30KHz subcarrier spacing and 51 PRBs).
=>You can capture a log and share to us.

Please share your current firmware.