Request for Global firmware

IoT Modules 5G Module
, , ,
1

Hello Quectel Team and Support Engineers,

I am currently working on an outdoor unit (ODU) hardware terminal, model Lyf JODU51741, which contains an integrated Quectel RG520F-JO module.

The device has a custom carrier customization firmware (Jio India) that locks out essential configurations. I have already successfully unlocked the bootloader, and the device is fully accessible via Fastboot and EDL mode interfaces.

I need to cross-flash this module back to a clean, generic, unbranded Quectel factory firmware baseline to unlock standard operational capabilities (such as the default Quectel WebUI/LPA dashboard and open AT command interface via serial terminal).

Could you please provide the latest generic factory firmware package, partition maps, and flash utilities for this specific variant?

Module & Device Details:

  • ODU Model: Lyf JODU51741 (Jio AirFiber ODU)

  • Module Chipset: RG520F-JO (Qualcomm SDX65 Platform)

  • Current State: Bootloader is fully unlocked. Accessible via Fastboot/EDL.

  • Requested Files: Latest available stable generic firmware build (e.g., RG520FJOAA series or equivalent clean target images) along with the standard QFlash/QFirehose deployment tools.

2

Dear @Neil_Mukherjee
I have sent to your email before, please check.

3

Hi Silvia,

I also need the generic firmware for the RG520F-JO / JODU51741.

Could you please share the firmware package with me as well?

My email address is: kdbhaibittu@gmail.com

Thank you.

4

i too need it for the same exact model
can u send me ?

ODU Model: Lyf JODU51741 (Jio AirFiber ODU)Module Chipset: RG520F-JO (Qualcomm SDX65 Platform)

5

Dear @Bittu_kittu
Before upgrade, please check your current firmware.
I have sent standard version to your email ,please check.

6

Dear @labyrinth
Before upgrade, please check your current firmware.
I have sent standard version to your email ,please check.

7

Dear Silvia,

Thank you. I have received the standard firmware you sent to my email.

I will first check the current firmware version on my RG520F-JO module before proceeding with any upgrade.

Could you please advise me on the recommended method or command to check the current firmware version on the RG520F-JO?

8

Dear silvia can you send the firmware via the mail anurajhere@outlook.in
and how to add e sim profile ??

10

Dear @Bittu_kittu
Use ATI or AT+CGMR to query.

11

Dear @anurajhere
It need tool to add profile.
Please contact with your supplier to get it.

12

Dear @Bittu_kittu
The board isn’t Quectel, we don’t know where is USB_boot.
Please contact with your supplier.