Hello Quectel Support,
Please provide the official, current documentation for the following module and firmware:
Module: Quectel EP06-ELA
ATI output: EP06
Firmware revision: EP06ELAR04A20M4G
AT port baud rate: 115200
I specifically need:
The applicable EP06-ELA AT Commands Manual
All other applicable EP06-ELA Specifications, Commands, Hardware and other related Manuals
The GNSS AT-command documentation, including supported commands and parameters
Documentation describing GNSS NMEA output and port configuration
Any firmware-specific notes for GNSS operation
The public Download Zone links previously located for EP06 documentation return 404 or “No downloads found.”
The module responds to:
AT+QGPS=?
+QGPS: (1-4),(1-255),(1-1000),(0-1000),(1-65535)
AT+QGPS?
+QGPS: 1
AT+QGPSCFG=? reports support for configuration items including:
“outport”,(“none”,“usbnmea”,“uartdebug”)
“nmeasrc”,(0,1)
“gpsnmeatype”,(0-31)
“glonassnmeatype”,(0-7)
“galileonmeatype”,(0,1)
“beidounmeatype”,(0-3)
“gsvextnmeatype”,(0,1)
“gnssconfig”,(0-6)
However, the following commands return ERROR:
AT+QGPSNMEA=?
AT+QGPSNMEA?
Please confirm the correct commands for obtaining a position fix and enabling NMEA output on this exact firmware, and provide the corresponding controlled-release manuals.
Thank you beforehand.