Query _Neighbour_ Cell Information for NR SA

Technical Subjects
1

Hi there,
I’d like to know why the neighbourcell can not be queried for the 5G NR SA mode. Below is a sample output.

AT+QENG=“neighbourcell”
OK

AT+QENG=“servingcell”
+QENG: “servingcell”,“NOCONN”,“NR5G-SA”,“TDD”, 460,01,9013B004,299,690E0F,633984,78,12,
-107,-13,2,1,-
OK

Any response is highly appreciated

2

For NR SA, there is a new command enabled at the higher Firmware to find neighbors information
AT+QNWCFG=“nr5g_meas_info”