Not able to get the GPS module started

IoT Modules GNSS Module
1

Im using EC25 and connecting via miniterm. My GPS log is created in tty/USB1 and commands are executed in tty/USB3
I execute the below commands
ati
Quectel
EC25
Revision: EC25EFAR02A08M4G
OK
at+qgps=1
OK

And i execute miniterm on /dev/tty/USB1 but no log is appearing.

The GPS antenna is connected and is in the open.

Please help to resolve this issue. Thanks.

2

Dear Sir

Please confirm whether there is a NMEA output port configured, which can be configured through the AT+QGPSCFG=“outport” command. For details, please refer to the attached application document.

Best Regards
Quectel_EC2x&EG9x&EG2x-G&EM05系列_GNSS_应用指导_V1.1.pdf (549.6 KB)