Hi,
I am new to quectel, currently using EC200UCN. I am trying to get GPS location value but i am not getting it.
Revision: EC200UCNAAR02A10M08
AT+QGPS=1
OK
AT+QGPSCFG=“nmeasrc”,1
OK
AT+QGPSGNMEA=“RMC”
OK
AT+QGPSINFO
+QGPSINFO:
OK
Hi,
I am new to quectel, currently using EC200UCN. I am trying to get GPS location value but i am not getting it.
Revision: EC200UCNAAR02A10M08
AT+QGPS=1
OK
AT+QGPSCFG=“nmeasrc”,1
OK
AT+QGPSGNMEA=“RMC”
OK
AT+QGPSINFO
+QGPSINFO:
OK
Hi,
Relevant guidance documents have been sent to you, please check.
Please take a photo of the module you are using.
Not all the Quectel module support the GNSS.
Hi,
I am using EC200U. Its revision number is
AT+GMR
EC200UEUAAR02A07M08
OK
I am unable to get GPS Location information
AT+QGPS=?
+QGPS: 1,(1-255),(0-1000),(0-1000),(1-65535)
OK
AT+QGPS?
+QGPS: 1
OK
AT+QGPSLOC=1
+CMS ERROR: 516
AT+QGPSLOC=1
+CMS ERROR: 516
AT+QGPSLOC=2
+CMS ERROR: 516
AT+QGPSGNMEA?
OK
AT+QGPSGNMEA=“RMC”
+QGPSGNMEA: $GNRMC,V,N,V*37
OK
Response from the EC200U for GNSS AT Command
AT+QGPSINFO
+QGPSINFO: N/A,G1B1E1,VN/A,R3.4.1.12Build127M,N/A,N/A
OK
Yes I know that. Before purchasing this EC200U-EU, I had requested to give module with GPS and BLE.
This module EC200U_EU whixh I am using has GPS and BLE.
Sorry. Did you resolve it?
Please contact me by email bean,wang@quectel.com.
If needed, I think a remote session with the device might be better.