MC60 Debug Port

Technical Subjects Open Solution
1

Hi,
when I start an application on the debug port I get this line “OpenCPU_GS3_SDK_V1.7”. Is there any way to disable it?

2

Dear Sad

I don’t quite understand what you mean. What is the model of the module you are using?Is development mode AT command mode or OPEN mode?What is the firmware version used?Please give detailed feedback on the problems you have encountered. Thank you.

3

Hi Grey,

MC60 module, firmware version MC60CAR01A12.
I use UART PORT 2 to output the information.
After running the application I get this piece of the log.

10:32:40.389> OpenCPU_GS3_SDK_V1.7
10:32:40.389> <-- RIL is ready -->
10:32:42.451> BT device power on.
10:32:42.451> BT device name is: MC60.
10:32:42.517> BT callback function register successful.
10:32:42.517> BT visble mode is: 1.
…

The very first line is “OpenCPU_GS3_SDK_V1.7”, but I don’t output this line in the code, can I somehow remove the output of this line?

4

Dear Sad

Please post the code you are running. I think you have put this print in a place where you haven’t noticed.

5

Hi Grey,
here is my codeBTtest.zip (509.3 KB)

6

Dear Sad

Do you have a V1.8 SDK? If yes, can you test to see if the effect is consistent.

7

Hi Grey,

I don’t have the V1.8 SDK, is there any way I can get it?

8

Dear Sad

Please use download test.:
https://quectel123-my.sharepoint.cn/:u:/g/personal/hf-domfae_dom_quectel_com_cn/ER59CVjXhSVLui4UhD6i1yABCTS0lNiO0-CP62nPcttUMw?e=zqJGeW