I tried the Example AT commands on the SMTP Application of M95 but
the modem was not responding after sending AT+QSMTPDST
Firmware Version: M95FAR02A08
Please see below for the logs:
(23:20:26.996) (>>) AT
(23:20:26.996) (>>) OK
(23:20:47.373) (<<) AT+QIFGCNT=0
(23:20:47.489) (>>) AT+QIFGCNT=0
(23:20:47.489) (>>) OK
(23:20:53.475) (<<) AT+QICSGP=1,“http.globe.com.ph”
(23:20:53.591) (>>) AT+QICSGP=1,“http.globe.com.ph”
(23:20:53.591) (>>) OK
(23:20:57.971) (<<) AT+QIREGAPP
(23:20:58.087) (>>) AT+QIREGAPP
(23:20:58.087) (>>) OK
(23:21:02.900) (<<) AT+QIACT
(23:21:03.033) (>>) AT+QIACT
(23:21:03.332) (>>) OK
(23:21:07.042) (<<) AT+QILOCIP
(23:21:07.180) (>>) AT+QILOCIP
(23:21:07.180) (>>) 100.88.95.124
(23:21:12.741) (<<) AT+QSSLCFG=“smtpstyle”,0
(23:21:12.873) (>>) AT+QSSLCFG=“smtpstyle”,0
(23:21:12.873) (>>) OK
(23:21:29.383) (<<) AT+QSMTPUSER="xxxxxx@gmail.com"
(23:21:29.515) (>>) AT+QSMTPUSER="xxxxxt@gmail.com"
(23:21:29.515) (>>) OK
(23:21:37.728) (<<) AT+QSMTPPWD=“xxxxxx”
(23:21:37.859) (>>) AT+QSMTPPWD=“xxxxxx”
(23:21:37.859) (>>) OK
(23:21:41.923) (<<) AT+QSMTPNAME=“binmonitor”
(23:21:42.055) (>>) AT+QSMTPNAME=“binmonitor”
(23:21:42.055) (>>) OK
(23:21:46.722) (<<) AT+QSMTPADDR="xxxxxxx@gmail.com"
(23:21:46.869) (>>) AT+QSMTPADDR="xxxxxxx@gmail.com"
(23:21:46.869) (>>) OK
(23:21:52.233) (<<) AT+QSMTPSRV=“aspmx.l.google.com”,25
(23:21:52.356) (>>) AT+QSMTPSRV=“aspmx.l.google.com”,25
(23:21:52.356) (>>) OK
(23:22:03.624) (<<) AT+QSMTPDST=1,1,“xxxxxxxx@gmail.com”
I cannot receive any response at this point.
Please help.
