Hello @Raphael-Q
Currently I got LC29HBA module that is running the following firmware LC29HBANR11A02S_CSA4.zip that it should be for 4-wheels application.
Can I get the latest firmware for 2-wheels application?
Should I set something special as Hardware configuration?
thanks
KR
C
hello,
any feedback on that?
thank you for your attentions.
KR
Hi Carlitos,
I will send you LC29HBA 2-wheels firmware via message.
Best regards.
1 Like
Hello Raphael,
is there any update firmware for the LC29HBA?
I have currently this one LC29HBANR11A01S_CSA4.
Additional question CSA4 means 4 wheels, while CSA2 means 2-wheels?
Thanks
have a nice day
C
Hi Carlitos,
Currently LC29HBA_CSA4 has been updated to LC29HBANR11A03S_CSA4. I will send you via message.
LC29HBA_CSA2 is for 2-wheels application like bicycle, scooter, motorcycle …etc.
Best regards.
1 Like
Hello Raphael,
with the FW you sent to me I noticed that now the $PQTMDRCAL is showing as following
$PQTMDRCAL,1**,3**,3*5D but my documentation is reporting only 2.
What is the meaning of 3 in ?
Thanks
regards
Hi Carlitos,
If the module is fully calibrated, LC29HBA should output $PQTMDRCAL,1,2,3*5C.
Can you send me the log via message?
Best regards.
Hello Raphael,
I noticed that downloading QGNSS it reports high precision as indication on the right panel.
Hi Carlitos,
The new calibration status in PQTMDRCAL, is shown below. LC29H DR&RTK Application Note is under updating.
Best regards