LC29H (EA) Position Accuracy PQTMEPE not supported? How to read accuracy on RTK module

IoT Modules GNSS Module
2

Hi Mathijs,

LC29HE supports PQTMEPE to output estimated error since LC29HEANR11A03S_RSA,2023/10/31. I will send you the latest firmware via message.

Send: $PQTMCFGMSGRATE,W,PQTMEPE,1,2*1D → enable PQTMEPE. Take effect once the command is sent successfully.

Send:$PQTMSAVEPAR*5A → saving PQTM configurations. The PQTM settings won’t be erased by reset or power off.

Best regards.