LC29H(BA) Use question

IoT Modules GNSS Module
,
1
  1. Do I have to use UART1 (Tx Only) and UART2 (Rx Only) separately for GNSS (NMEA) output and RTCM correction input? I read in the document that NMEA is text-based periodic data, and RTCM is real-time binary data that is sensitive to delay.
2

Hi SeonWoong,

You can use UART1 for both NMEA output and RTCM messages. You can refer to the attached hardware design pages 37 and 38.
Quectel_LC29H_Series_Hardware_Design_V1.3.pdf (1.7 MB)

BR,
June