Hello, we are using the LC29D for velocity and position tracking of a watercraft (boat). We have noticed that the GPS speed output by all the messages we have tried so far is highly delayed when compared to a 3rd party reference GPS unit. We are observing about a 2.5 to 3 second delay when overlapping the data log traces of the LC29D and our reference GPS module.
Is this normal, or is there some way to get a less delayed reading out of the module? We have tried several different messages. For reference we want the pure GPS result, not the fused INS/IMU result. It has occurred to us the delay might be due to the fusion engine, but we don’t seem to be able to turn this off, is there any way we can get a more “raw” doppler speed output from this module and firmware?
Finally, we have rules out delays on our side and also see that the time sent with each messages is only delayed by 200-500ms when compared to a reference source, so somehow the velocity in the same message is significantly more delayed than the time.