LC29(BS) NMEA output

IoT Modules GNSS Module
1

Hello!

Working with Waveshare LC29H(BS) HAT at the moment. Question: Should I get an NMEA messages for an output in ASCII format from USB with correct baud rate? Looks like only RTCM and occasional PAIR message are available:

image
image827×653 26.6 KB

If I should have, is there some command to have those?

2

Hi Anviltop,

LC29H(BS) base station module mainly outputs RTCM data. The “garbage data” in your window should be RTCM data in binary format.

BS supports input/output NMEA message below
image

BS supports output RTCM message below

image
image685×678 49.9 KB

Best regards.