Hello. I would like to get the latest firmware for the RM502Q-GL module. Here is a screenshot of the AT+QGMR command. Thanks!
Wow, didn’t thought the GL version was so far behind in development. What about RG502?
Any news about R11A08?
- The latest version I can find so far is attached
Why in the module RM502Q-GL much older firmware compared to the module RM502Q-AE?
Will the firmware be developed further for the module RM502Q-GL?
tôi cần chương trình cơ sở mới nhất RM502QGL mail của tôi dangthengan@gmail.com
I have sent it to your email,pls check
tôi cần chương trình cơ sở mới nhất RM502QGL mail của tôi nguyentrungchien24241997@gmail.com
Please provide your current firmware version
AT+QGMR
tôi cần chương trình cơ sở mới nhất RM505Q-AE
ati
Quectel
RM505Q-AE
Revision: RM505QAEAAR11A04M4
AT+QGMR
RM505QAEAAR11A04M4G_01.200.01.200
mail của tôi nguyentrungchien24241997@gmail.com
Dear @Chien_Nguyen
RM505QAEAAR11A04M4G_01.200.01.200 is the latest one in R11.
Thiết bị của tôi đang bị lỗi. Bạn có thể cung cấp giúp cho tôi phiên bản phần mềm này không
Dear @Chien_Nguyen
I have sent to your email, please check.
Please send to me latest firmware version use for RM502Q-GL
Hi,@Hoang_Vo
Could you tell me your current firmware version? use ATI or AT+QGMR? commands
Thanks.
My firmware version RM502QGLAAR12A01M4G
Hi,@Hoang_Vo
Sorry,I didn’t find the firmware package related to the R12 baseline.
can you give me R11 FW version, because in this version i can not unlock ADB mode to install simpleAdmin WebUI
Hi,@Hoang_Vo
Cross-baseline upgrades may involve risks. For the ADB function, you can try using the command “at+qcfg=“usbcfg”,0x2C7C,0x0800,1,1,1,1,1,1,0” to enable the ADB function.
i follow your suggestion but it reponse error