Hi, good afternoon!
I’ve got an EC25-EU module, firmware revision:
[2024-09-12 18:36:09:409_R:] at+cversion
[2024-09-12 18:36:09:413_R:] VERSION: EC25EUGAR06A05M4G
[2024-09-12 18:36:09:413_R:] Oct 16 2019 18:51:26
[2024-09-12 18:36:09:413_R:] Authors: QCT
[2024-09-12 18:36:09:413_R:] OK
[2024-09-12 18:40:16:479_S:] ATI
[2024-09-12 18:40:16:483_R:] ATI
[2024-09-12 18:40:16:488_R:] EC25EUGAR06A05M4G_01.005.01.005
Could you please provide me an updated software version?
Regards,
Two more things:
We want to update these pcie modules as usb audio card (UAC) is not working (sound is neither received nor sent, followed pdf guide to enable it and looks like it is enabled)
[2024-09-12 19:28:46:036_S:] AT+QDAI?
[2024-09-12 19:28:46:041_R:] AT+QDAI?
[2024-09-12 19:28:46:045_R:] +QDAI: 1,0,0,4,0,0,1,1
[2024-09-12 19:28:46:045_R:] OK
[2024-09-12 19:28:50:453_S:] AT+QPCMV?
[2024-09-12 19:28:50:458_R:] AT+QPCMV?
[2024-09-12 19:28:50:462_R:] +QPCMV: 1,2
[2024-09-12 19:28:50:462_R:] OK
[2024-09-12 19:29:01:561_S:] AT+QCFG="USBCFG"
[2024-09-12 19:29:01:565_R:] AT+QCFG="USBCFG"
[2024-09-12 19:29:01:571_R:] +QCFG: "usbcfg",0x2C7C,0x0125,1,1,1,1,1,1,1
[2024-09-12 19:29:01:571_R:] OK
We got qflash v6.0, but I’m not sure if will work with latest firmware.
Regards,
I have sent the latest firmware to you,pls check,and I hope you can click the for me
Thanks for the firm, however… I received the sharepoint.cn link but as soon as I try to verify my email, I don’t receive the email back
I’ve updated the email to a microsoft one, could you please send it again to my other address?
Regards!
Please provide another email address
Thank you very much for your support!
Downloaded, flashed*, and…
USB AUDIO now is working (Just tested it, alleluia it works!)
[2024-09-13 18:18:24:828_R:] VERSION: EC25EUGAR06A11M4G
[2024-09-13 18:18:24:828_R:] Jun 20 2024 21:37:44
[2024-09-13 18:18:24:828_R:] Authors: QCT
*for everyone: be aware that during flash a new device will appear, you may not have the drivers installed in that moment, however you can install drivers to that device without closing qflash and continue flashing selecting the new com port that will appear after the driver installation.
Thanks! We can consider this topic closed
Hello,
I have a Quectel EC25-EU modem currently running firmware:
EC25EUGAR06A03M4G_01.003.01.003
I am experiencing network registration issues and would like to update it to the latest compatible firmware, preferably:
EC25EUGAR06A11M4G_01.200.01.200
Could you please send me the latest official firmware package for EC25-EU, as well as the recommended QFlash version, to my email?
Thank you in advance.
I have sent the latest firmware to you,pls check
Dear Quectel Support,
We would like to upgrade our Quectel EC25-EU modem.
Current firmware:
EC25EUGAR06A05M4G_01.005.01.005
Our modem experiences the USB Audio problem described in your forum thread:
Hi, good afternoon!
I’ve got an EC25-EU module, firmware revision:
[2024-09-12 18:36:09:409_R:] at+cversion
[2024-09-12 18:36:09:413_R:] VERSION: EC25EUGAR06A05M4G
[2024-09-12 18:36:09:413_R:] Oct 16 2019 18:51:26
[2024-09-12 18:36:09:413_R:] Authors: QCT
[2024-09-12 18:36:09:413_R:] OK
[2024-09-12 18:40:16:479_S:] ATI
[2024-09-12 18:40:16:483_R:] ATI
[2024-09-12 18:40:16:488_R:] EC25EUGAR06A05M4G_01.005.01.005
Could you please provide me an updated software version?
Regards,
Voice calls connect successfully, but USB Audio is silent. Audio occasionally works after manually restarting the UAC interface using AT+QPCMV.
We would like to request:
EC25EUGAR06A11M4G_01.200.01.200 firmware, or a newer compatible stable release.
Confirmation that the firmware is compatible with our EC25-EU hardware.
QFirehose for Linux and the official upgrade instructions.
Confirmation of support for VoLTE, GSM voice calls and USB Audio.
Our system runs Ubuntu Linux with Asterisk 22.10.1.
Thank you.