after sending AT command described at paragraph
2.1.2. ATI Display MT Identification Information
of Quectel_HCM511S&HCM511S-E&HGMB11S_AT_Commands_Manual_V1.2.pdf
the resp received is:
Quectel
HGMB11S
Revision: HGMB11SAAR01A01K05
OK
is it the right hardware and software revision ?
actually in Quectel_HCM511S&HCM511S-E&HGMB11S_AT_Commands_Manual_V1.2.pdf
i’ve tried also message described in paragraph
2.1.3. AT+QVERSION Get Firmware Version
but chip resp is
ERROR
Go On now with command sequences:
Sending
AT+QBLEINIT=2,1
chip resp is ERROR
Sending
AT+QBLEINIT=2
chip resp is OK
Sending Query
AT+QBLEINIT?
chip resp is <2> => peripheral role rightly configured
Go On now with command sequences:
Sending command
AT+QBLEGATTSSRV=“FFF1”
chip resp is ERROR
also next command are NOT working (resp ERROR)
AT+QBLEADVPARAM=150,150
AT+QBLESTAT
Is it possible to have log (also in bytes) of a set-up working
in order to compare firmware version ?
Where i can find QCOM tool for Windows 11 ?
because i cannot find it in this link