I have sent it to the email,pls check
Firmware update request, currently on:
RM502QAEAAR11A04M4G_01.003.01.003
Reading through the post, it looks like A02 might provide best signal by using more power, can anyone provide data points between A02 and the latest firmware? Using Tmobile on M01K21 Cheetah router and get random disconnects
Could i please get the latest firmware update for the RM502Q-AE. Thank you
I have sent it to the email,pls check
I have sent it to the email,pls check
Hi, can I get the latest firmware for the RM502Q-AE? Thank you.
Received link for RG502QEAAAR13A03M4G_02.001.02.001.zip , just want to verify that this is for the RM502Q-AE as well (RM vs RG)
I have sent it to the email,pls check
I have sent it to the email,pls check
Can I have a link for latest firmware for the RM502Q-AE modem and manual with latest commands please? Thank you
I have sent it to the email,pls check
hi i am running on firmware as below, is there any firmware update that would resolve the connection drop issue on 5G NSA? Thanks!
RM502QAEAAR11A04M4G
my local network is having LTE B2/B7 + 5G N66/N78 eNDC connection, is the modem be able to support it? i notice 5G only works when the modem camping on LTE B13.
Hello, may I also have the most recent RM502Q-AE firmware/drivers/resources please?
Thank you.
Hi Herbert,
Can I please request the latest firmware for RM502Q-AE as well as QFlash for Windows, NDIS drivers and AT command reference?
My current firmware is: RM502QAEAAR11A04M4G_01.004.01.004
Thank you!
I inherited a cell package project at our office for a mobile branch setup and Iām working with a Mikrotik Chateau 5G that was swapped with a RM502Q-AE and in the USA with T-Mob. I get connectivity currently, but looking to get the latest firmware package, anyone available to assist?
Many thanks in advance!
Please send the latest RM502Q-AE firmware to me too, please?
RM502QAEAAR11A04M4G_01.200.01.200
I have sent it to the email,pls check
I have sent it to the email,pls check
Ok, I have updated with QFirehose fine, but, on older firmware I have ttyUSB[0,1,2,3] and now I have only ttyUSB[0,1,2]. According documentation ports need to be on range 0-3, not 0-2. Have any different?
Hi herbert, can you please send me the most recent firmware for RM500Q-AE, RM502Q-AE and RM520N-GL along with latest Windows MBIM driver (possibly Quectel_Windows_USB_Driver(Q)_MBIM_V1.3.1.zip). Though I am able to get a data connection using the 1.0 MBIM driver found in Download Zone after configuring on another device with the standard Quectel_LTE&5G_Windows-USB_Driver_V2.2.4, the COM ports are not recognized for these modems with that 1.0 MBIM driver, so Iām hoping the newer one will support both MBIM and allow me to see the control ports without needing to swap back and forth between drivers.