FCM360W BLE Transparent Mode

WIFI/BT
1

Hi,
I’m using Quectel FCM360W.
I want use BLE in transparent transmission mode.I can set device as peripheral device and transmit data but when i want to enter transparent transmission mode its giving error.Firmware version:FCM360WAAR01A03

AT
OK
AT+QBLEINIT=2,0
OK
AT+QBLENAME=“QuecFCM360W”
OK
AT+QBLEGATTSSRV=“fff1”
OK
AT+QBLEGATTSCHAR=“fff2”
OK
AT+QBLEGATTSSRVDONE
OK
AT+QBLEADVPARAM=150,150
OK
AT+QBLEADVSTART
OK
+QBLESTAT: “CONNECTED”
+QBLEPEERROLE: 0
+QBLERECV: 0,“10”,10
from phone
AT+QBLEGATTSNTFY=“FFF2”,“from QuecFCM360W”
OK
AT+QBLETRANMODE=“FFF2”
ERROR
AT+QBLETRANMODE=“FFF2”,0
ERROR
AT+QBLETRANMODE=“FFF2”,1
ERROR

2

FCM360WAAR01A04.zip (12.0 MB)

hi @macar
Please try with attached newer version.

1 Like
3

Hi @Waleed_Zafar1 , thank you for your support. It’s now working in transparent mode. This might be off-topic, but when sending and receiving data over BLE, can I use hex data?

4

hi @macar
Yes , you can send data in hex

1 Like