Fail to access /usr/share/udhcpc/default.script, errno: 13 (Permission denied)

Hi, I am currently meeting this issue. I have followed the supplied guide and configured the kernel as well as tried this using modules.

The AT Commands work fine with obtaining HTTP requests, though I will need to make this work with QWWAN.

The module being used is:

Quectel
EG21
Revision: EG21GGBR07A09M1G

Log from Qconnect is below.


[07-27_14:04:13:688] Find /sys/bus/usb/devices/1-7 idVendor=0x2c7c idProduct=0x121
[07-27_14:04:13:689] Auto find qmichannel = /dev/cdc-wdm0
[07-27_14:04:13:689] Auto find usbnet_adapter = wwan0
[07-27_14:04:13:689] Modem works in QMI mode
[07-27_14:04:13:704] cdc_wdm_fd = 7
[07-27_14:04:13:780] Get clientWDS = 5
[07-27_14:04:13:812] Get clientDMS = 3
[07-27_14:04:13:844] Get clientNAS = 2
[07-27_14:04:13:876] Get clientUIM = 2
[07-27_14:04:13:908] Get clientWDA = 1
[07-27_14:04:13:940] requestBaseBandVersion EG21GGBR07A09M1G
[07-27_14:04:14:068] requestGetSIMStatus SIMStatus: SIM_READY
[07-27_14:04:14:101] requestGetProfile[1] wap.vodafone.co.uk/wap/wap/0
[07-27_14:04:14:132] requestRegistrationState2 MCC: 234, MNC: 15, PS: Attached, DataCap: LTE
[07-27_14:04:14:164] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED
[07-27_14:04:14:164] ifconfig wwan0 down
[07-27_14:04:14:172] ifconfig wwan0 0.0.0.0
[07-27_14:04:14:230] requestSetupDataCall WdsConnectionIPv4Handle: 0x86e720a0
[07-27_14:04:14:357] ifconfig wwan0 up
[07-27_14:04:14:363] Fail to access /usr/share/udhcpc/default.script, errno: 13 (Permission denied)
[07-27_14:04:14:363] busybox udhcpc -f -n -q -t 5 -i wwan0
udhcpc: started, v1.30.1
udhcpc: sending discover
udhcpc: sending select for 10.118.68.77
udhcpc: lease of 10.118.68.77 obtained, lease time 7200

Dear Moes,
Thanks for your inquiry in Quectel forum.
Please confirm whether the module already register on network successful before you dial up with QWWAN. From the log you provide, we can see following error information, so please double check it. Thanks!
image