I am looking to lock specific 5G SA bands on a CPE router powered by the RG500L-EU module. Since the router’s web GUI does not support band-locking, I have connected to the module via the onboard Type-C port using Quectel QCOM (v1.8).
To configure this properly and verify the relevant AT command syntax (such as band mask configuration), could you please provide the latest version of the Quectel RG500L-EU AT Commands Manual? I checked the public downloads section on the website but could not locate this document.
RG500L has no AT command to lock band. If you just test with a CPE based on RG500L. Please contact with device vendor to confirm if they provide any interface to support band-locking.
RG500L just supports Quecopen solution. If you intend to select RG500L for your project please contact Quectel local sales to get SDK.