I have an EM12-G module and I don’t know why it never get an LTE-A connection but only 4G (sorry I don’t know the correct technical words)
In the EM12 module I used the sim card on my Samsumg SM-G950F phone. My phone does get LTE-A 4G+ connection
So, I don’t understand why the EM12-G module never gets 4G+ when I use the same sim card as my phone and put the module in the same location on the phone where it gets 4G+ connection.
extra information: I tried with two sim cards from another company and it allowed me to get CA in both companies …
AT+QCAINFO
+QCAINFO: "pcc",2325,75,"LTE BAND 4",1,24,-99,-14,-66,13
+QCAINFO: "scc",2175,75,"LTE BAND 4",2,24,-104,-14,-70,6,DL
OK
Here I leave information about my phone and the module located in the same place using the same sim card on the same day.
ATI
Quectel
EM12
Revision: EM12GPAR01A21M4G
OK
AT+QNETINFO="servingcell"
+QNETINFO: "servingcell","NOCONN","LTE","FDD",730,01
+QNETINFO: "servingcell","PCC",843E05,245,1125,2,-100,-11,-70,14,4,4,106B,0
OK
AT+QENG="neighbourcell"
+QENG: "neighbourcell intra","LTE",1125,245,-13,-101,-69,0,-,-,-,-,-
+QENG: "neighbourcell intra","LTE",1125,242,-19,-111,-80,0,-,-,-,-,-
+QENG: "neighbourcell intra","LTE",1125,19,-20,-117,-83,0,-,-,-,-,-
OK
AT+QNWINFO
+QNWINFO: "FDD LTE","73001","LTE BAND 2",1125
OK
AT+QCAINFO
OK
AT+QCFG="band"
+QCFG: "band",0x5af0,0x2000001e0bb1e39df,0x0
OK
AT+QCFG="nwscanmode"
+QCFG: "nwscanmode",0
the band28 actually doesnt work…It has a lot of Jitter