Model: EG800K
Version: EG800KEULCR07A03M04
I’m configuring modem with following:
“AT&D2&C1;+CGEREP=1,1”,
“AT+CREG=1;+CGREG=1;+CEREG=1”,
without saving them.
At first modem boot I receive the unsolicited messages:
“+CGEV: EPS PDN ACT 1” and
“+CEREG: 5”
but after a reboot nor detach event nor new unsolicited is received.
Someonelse has same issue or can reply with a tip to have always fresh notify of registration value from modem at every reboot?
My collegue help me to discover that if we save modem configuration:
AT+CREG=1;+CGREG=1;+CEREG=1 // enable wanted unsolicited
AT&W // save
than at modem reboot we have fresh notification!!!
so probably they were missing cause fast timing
Hi Riccardo,
We are sorry if the response is late.
Is the issue resolved?
Regards,
Fazrul Redzuan
is it resolved as you can read at first post, I described that if AT+CEREG=1 is saved than registration notification is always updated after reboot