Hi all,
I’m using an EG800AK module in India on Airtel LTE. Data and SMS work fine (send + receive confirmed), but incoming voice calls never reach the module. Callers hear “the number you have dialed is currently busy” and no RING / +CRING URC appears.
Module info
ATI
Quectel
EG800AK
Revision: EG800AKCN91LCR07A07M04
AT+COPS? -> +COPS: 0,0,"airtel",7
AT+CEREG? -> +CEREG: 0,1
AT+CSQ -> +CSQ: 24,99
What I’ve tried
URCs are enabled (AT+QINDCFG="all",1 and "ring",1), plus AT+CLIP=1 and AT+CRC=1.
All IMS/VoLTE related commands fail:
AT+QCFG="ims" -> +CME ERROR: 4
AT+CIREG? -> ERROR
AT+QMBNCFG="list" -> ERROR
AT+QMBNCFG="autosel" -> ERROR
AT+CAVIMS? -> ERROR
AT+CEVDP? -> ERROR
AT+CLCC -> ERROR
AT+QCFG=? also lists no IMS/VoLTE keys.
My understanding
The CN firmware appears to have no IMS/VoLTE stack. Since Indian operators need VoLTE for voice on LTE-only devices, calls can’t be delivered.
Questions
- Is there a VoLTE-enabled firmware for EG800AK that works with Indian operators (Airtel / Jio / Vi)?
- If not, which EG800AK variant or alternative Cat 1 / Cat 1 bis module supports VoLTE voice in India?
- Can existing modules be upgraded via firmware, or is new hardware required?
Full AT logs available if needed. Thanks!