EG25G Serial (Not IMEI) number via AT command

Is there an AT command to get the Serial Number (Same as etched on the module) of an EG-25?
I know about the AT+CGSN command which gives me the IMEI. This is not what I want.
I want the SN that is etched on the module above it.

Many thanks,

Dear Kena,
Thanks for your inquiry in Quectel forum.
You can try to use the following command to get the module SN number. Thanks!

1 Like

Hi, is there an AT command to restore the IMEI and SN# to default for an RM502Q-AE ?
Seems strange I would have to reinstall the firmware to fix this issue.

Hi Customer:

We have no AT command to restore the IMEI and SN#.

If the device only has userdata CEFS partition data lost,you can use the follow AT command to try:
Don’t use too often because it uses intensively Flash and the module at the end can be destroyed.After you execute AT+QPRTPARA=3, all configuration will be erased and overwritten with Factory setting values.

How safe is it to run AT+QPRTPARA=3 ? Will be IMEI, SN# lost? Are there any RF factory calibration, that will be wiped as well?