Hello Quectel Support Team,
I have a Quectel EG18-EA module installed in a MikroTik LHG kit.
After updating to version EG18EAPAR01A13M4G_01.300.01.300, the modem hit a regional lock in Russia (MCC 250).
I attempted to downgrade it to the A12 branch, and now the module is completely stuck in Factory Test Mode (CFUN: 5 / QRFTESTMODE: 1).
Could you please provide the Full Firmware Flash Package for Windows (QFlash) for version EG18EAPAR01A13M4G_01.201.01.201 (or another clean, un-locked A13 branch version compatible with the 01.300 bootloader) to recover my NVRAM/QCN partitions?
Also, please send the latest QFlash tool.
My Device Details:
Model: EG18-EA (EG18EAPA)
IMEI: 869816043965333
Following up on this thread with additional diagnostics. I inspected the attached XQCN backup (taken while the modem is stuck in CFUN:5) directly — all 53 RF calibration items under /nv/item_files/rfnv/ decompress to byte-for-byte identical placeholder data, rather than the distinct per-band values a working calibration would have. This confirms the RF NV data is missing/defaulted rather than the module just being stuck on a mode flag, which is why AT+CFUN=1 and AT+QRFTEST both fail with a CME error.
I don’t have a pre-failure backup, so this file won’t restore the module on its own — attaching it as evidence for diagnosis. Would appreciate either a matching reference QCN for this firmware, or guidance on next steps.
EG18-EA_XQCN_Analysis.txt (2.4 KB)
Hi, I have sent the firmware and QFlash tool to your email, pls chk, thanku.