Hello,
I use EC25-EU module with an external removable eSIM.
Quectel
EC25
Revision: EC25EFAR06A21M4G
I want to configure a eSIM card profile using AT commands. The module sees the external ESIM and can transmit its ICCID in response to the AT+QCCID command
+QCCID: 89FFFFFFFFFFFFFFFF
However, the Esim configuration commands do not work.
AT+QESIM=“eid”
ERROR
AT+QESIM=“list”
ERROR
When i insert the esim in a usb reader, i can select the active profile with lpac on linux or with EasyEUICC, it’s works.
My question:
Do i need a special firmware to make AT+QESIM command to work ?
There is a special AT command to activate this feature ?
Have a good day