for some reason the EC25-AU keeps defaulting to +CFUN: 4 which disables rx and tx on the RF Circuits.
I’ve tried the following and this enables it, but after a reboot it goes back to disabled.
AT+CFUN?
+CFUN: 4OK
AT+CFUN=1
OK+CFUN: 1
AT+CFUN?
+CFUN: 1OK
I’ve also tried AT+CFUN=1,1 but when it comes back online it is back to +CFUN: 4
Is there something I’m missing to be able to save this value so it is persistent?