BG96 Power ON for 5 sec and getting OFF

IoT Modules LPWA Module
1

We are using BG 96 board. But it is powered ON for 5-10s. After that, it is shutting down.

We used AT&F, AT+QPRTPARA=3 to reset the board to default values. Even though it is facing a similar issue.

Board is not at getting ON more than 5-10s

2

There are two possibilities.

  1. The first is module crash.

if so ， pls send email to support@quectel.com , we will help you analysis the dump log

  1. The second is that the module is registered under GSM. Under GSM network, the peak current of the module is 2A. Please check your power supply