BG96 Options for configuring Control plane optimization in CATM1

IoT Modules LPWA Module
1

Hi All,

I wonder if there are any options to configure CATM1 Control Plane optimization? As an example, in the case of NBIOT, there is an option through AT+QCFG=“nccconf”.

Additionally, could you please state which features can be configured by using AT+QCFG=“Feature_Switch_Flag”?

Thanks in advance,

Omar

2

hi,Omar_Saibene:
AT+QCFG=?

…
+QCFG: “nccconf”,(0-1FF)
…

OK
AT+QCFG=“nccconf”,11

OK
AT+QCFG=“nccconf”

+QCFG: “nccconf”,0x11

OK