BG96 not using network operator list from sim correctly

[pdaj_mm]

I found a somewhat similar issue:

BG96 not saving +QCFG="nwscanmode" after reset

Hi Stephen, Sending “at+qprtpara=3” did the trick! Now “nwscanmode” does not reset to 0 each time I reset or power up the module. What does that command do? And how did the modem get stuck into that state? Thanks.

I tried the AT+QPRTPARA command. Is this an expected response?

28/12/19 13:48:32.298 INFO: TX> "AT+QPRTPARA?"
28/12/19 13:48:32.303 INFO: RX> "AT+QPRTPARA?"
28/12/19 13:48:32.517 INFO: RX> "+QPRTPARA: 1,1,1,1"
28/12/19 13:48:32.523 INFO: RX> "OK"