BG96 LTE-M will not connect, PACSP0 received

Hi,
I am trying to set up a connection in Canada using the BG96 module, we are talking multiple units which were tested in Europe before shipped to Canada. Already have working units with BG95 in Canada, same firmware.
Here’s the LOG, below. (response messages are shown before the command). Does anyone see anything wrong with it? Does the BG96 need some additional config relative to the BG95?
There’s also this +PACSP0 which I could not find documented anywhere, google is a not hit either.

09:28:19.305 NB ANS-- - OK
09:28:19.305 NB OK - ATE0
09:28:19.427 NB ANS-- - OK
09:28:19.427 NB OK - AT+CFUN=0,0
09:28:19.552 NB ANS-- - OK
09:28:19.552 NB OK - ATE0
09:28:19.553 NB ANS-- - OK
09:28:19.553 NB OK - AT+CMEE=1
09:28:19.674 NB ANS-- - OK
09:28:19.674 NB OK - ATE0
09:28:19.797 NB ANS-- - OK
09:28:19.797 NB OK - AT+IPR=115200
09:28:19.919 NB ANS-- - OK
09:28:19.919 NB OK - AT+CEREG=4
09:28:20.041 NB ANS-- - OK
09:28:20.041 NB OK - AT+QCSCON=0
09:28:20.163 NB ANS-- - OK
09:28:20.163 NB OK - AT+QSCLK=0
09:28:20.163 NB ANS-- - OK
09:28:20.531 NB TO0 - AT+QCFG=“iotopmode”,2,1
09:28:20.654 NB ANS-- - +QCFG: “nwscanseq”,030201
09:28:20.654 NB ANS-- - OK
09:28:20.654 NB OK - AT+QCFG=“nwscanseq”
09:28:20.654 NB ANS-- - +QCFG: “nwscanmode”,3
09:28:20.654 NB ANS-- - OK
09:28:20.777 NB OK - AT+QCFG=“nwscanmode”
09:28:20.778 NB ANS-- - OK
09:28:20.778 NB OK - AT+QCFG=“roamservice”,2,1
09:28:21.271 NB ANS-- - OK
09:28:21.272 NB OK - AT+CFUN=1,0
09:28:21.272 NB ANS-- - OK
09:28:21.272 NB OK - ATE0
09:28:21.393 NB ANS-- - +CPIN: READY
09:28:21.393 NB ANS-- - OK
09:28:21.393 NB OK - AT+CPIN?
09:28:21.516 NBIOT SIM OK IN BC66_UNKNOWN_STATE
09:28:21.516 NB ANS-- - +CPIN: READY
09:28:21.516 NB ANS-- - OK
09:28:21.516 NB OK - AT+CPIN?
09:28:21.639 NB ANS-- - +QCCID: 89011XYZWHATEVER
09:28:21.639 NB ANS-- - OK
09:28:21.639 NB ANS-- - +CEREG: 2,“00001111”,“00000100”
09:28:21.639 NB ANS UNR - +PACSP0
09:28:21.639 NB OK - AT+QCCID
09:28:21.763 NB ANS-- - +CGDCONT: 1,“IP”,“internet.arkessa.com”,“0.0.0.0”,0,0,0,0
09:28:21.763 NB ANS-- - OK
09:28:21.763 NB OK - AT+CGDCONT?
09:28:21.887 NB ANS-- - +QICSGP: 1,“internet.arkessa.com”,“arkessa”,“arkessa”,3
09:28:21.887 NB ANS-- - OK
09:28:21.887 NB OK - AT+QICSGP=1
09:28:21.887 NBIOT CONFIGURED
09:28:22.011 NBIOT SIM OK
09:28:22.136 NB ANS-- - OK
09:28:22.136 NB OK - ATE0
09:28:22.258 NB ANS-- - +CEREG: 4,2
09:28:22.258 NB ANS-- - OK
09:28:22.258 NB OK - AT+CEREG?

Any feedback appreciated,
Thank you,
Lorand

Hi Lorand

What’s this means? are you sure using BG96?
image

BR
Linkin WANG

Hello, I am looking for a fee for someone able to connect my iot docassion gps lte to a server in it and install a
Quectel bg96 es quectel ec21-e because it is beyond my skills, I will have to take control of my computer remotely, connect to iot, delete the old server, giveclien, es meter, the new data servers and that’s it.

I am available at any time this is a serious request
My email address

Kdeux@hotmail.fr
Sincerely, kamel.
07.81.79.21.59