BG95 M3 Updating firmware via uart main

IoT Modules GSM Module
1

Hi, I want only gsm communication over bg95 M3 . Can I do firmware updates via main uart?I don’t want to use USB.

2

Hi Melihkiyi1:
If you want to upgrade through UART, you can use DFOTA method.
You can refer to the document in the link below:
https://www.quectel.com/download/quectel_bg95bg77bg600l_series_dfota_application_note_v1-1/

3

Which uart pins should I use to use the DFOTA method? (
debug or main or gnss)

4

The main UART. But please note that Delta package need to be obtained from Quectel technical support.
Please contact your local technical support.

5

thank you for answering my questions

6

You are welcome.Wish you all the best.