BG95-M3 Network Connection Configuration for Argentina

IoT Modules LPWA Module
1

Hi,

I have a BG95-M3 in a board with an eSIM. This board connected and worked before in Spain without any problem.

Now I’m in Argentina and the AT+COPS command doesnt take effect to connect to any network.

I changed the LTE Bands configuration to scan the regarding ones to the zone, but it didnt work.

How I can fix this, considering that the eSIM is multi-network?

Regards,

2

hi,Lautaro_Vera:
I suggest you apply for a SIM card in Argentina for testing, or the previous SIM card does not support roaming.

3

as your said ， this e-sim is MVNO , and should be registered the multi-network ,

pls contect with your SIM card vendor , and double check the provision of your e-sim.