BG95-M3 error response to AT+CGACT=1 command

Hi, I have been trying to open a socket with BGM95-M3 and I get an error. Below is the sequence of commands that I send to the mudule.

AT+CFUN=0
OK
AT+CGDCONT=1,IPV4V6,iot0718.com.attz
OK
AT+CFUN=1
OK
AT+CGACT?
+CGACT: 1,0
+CGACT: 3,0
+CGACT: 4,0
+CGACT: 5,0
+CGACT: 6,0
OK
ATI
Quectel
BG95-M3
Revision: BG95M3LAR02A03
OK
AT+CEREG?
+CEREG: 0,2
OK
AT+CSQ
+CSQ: 99,99
OK
AT+QNWINFO
+QNWINFO: “eMTC”,“311480”,“LTE BAND 13”,5230
OK
AT+QIACT=1
ERROR
Resending command…
AT+QIACT=1
ERROR

before you activate PDP context , pls check the registered status first 。

pls check with the below cmd

AT+cereg?