BG95 does not send CGREG URC

IoT Modules LPWA Module
1

Hello

BG95 module does not send properly CGREG URC’s:

AT+CFUN=4
OK
AT+CGREG=1
OK
AT+CFUN=1
OK
AT+CSQ
+CSQ: 19,99

OK
AT+CGREG?
+CGREG: 1,5

OK
AT+GMR
BG95M3LAR02A03

OK

Module does not send URC so I can not know when network is registered. I have to poll it and polling waste energy.

Any hint ?

Thank you in advance

Best Regards

STH

2

pls check the URC configure with below at :slight_smile:
AT+CREG=1

OK
AT+QURCCFG=“urcport”,“usbmodem”

3

I am using serial port. By setting URC to uart1 if effectively works.

Problem solved

Thank you