BG600L - Low-Power GNSS Tracking

IoT Modules LPWA Module
1

Hello Forum,
We want to use BG600L for a low power tracking application.

After power up and not PIN protected SIM, the module first tries to register,
but we would first like to get the GPS position, with no need of network (which might take up to 5 minutes).

Is there any possibilty to power up the BG600L in unregistered mode? I know, “at+cfun=0” will deregister, but this needs some unnecessary battery.

Thanks, Jo

2

Solution: AT+QGPSCFG=“autogps”,1

3

thanks for your time to find this solution

add one cmd ，you can send the below cmd to set gnss with high priority

AT+QGPSCFG=“priority”，0

1 Like