BAM Low Speed Peripheral (BLSP) on SC600T

IoT Modules Smart Module
1

Hi,

I want to know following things related to BLSP Ports
1)There is a total of 8 BLSP ports available on SC600T?
2)each BLSP port has 4 pins so can I use 2 pins for I2c and 2 pins for UART?
3)Driver Development Documents mentions, by default in kernel SPI6, I2C-2, I2c-3 I2C-5, and UART2, UART5, UART4 are configured
UART2 - BLSP 1
UART5 - BLSP 3
UART4 - BLSP 2
3)So I want to know which buses are mapped to which BLSP ports?
4) How many BLSP ports are free i.e not used by any of the buses?

2

Hi,

Can you please provide some documents ,any post or any information related to msm8953 BLSP .

Thank you

3

Screenshot%20from%202020-02-22%2018_26_22
Screenshot%20from%202020-02-22%2018_26_22981×471 357 KB

can 1 BLSP lane contain 4 QUP units ?

4

Hi PunitChotaliya,

I think you can contact with local fae, and you ask him for a gpio configuration form, and it is listed the pins of uart,i2c,spi and other gpios. At the same time, you can ask him for a hardware design, it describe the usage of these ports.

Thank you~