Hi all,
Is there an opportunity to disable the auto register to network and only enable if I really need it, to save power? I use the BC660K.
Hi all,
Is there an opportunity to disable the auto register to network and only enable if I really need it, to save power? I use the BC660K.
hi,patrech:
you can execute:
at+cfun=0
re-boot module:
at+cfun=1
at+cfun=0 looks like not saved to non-volatile memory. After reset, modem starts again registration immediately.
Is it possible to boot modem to cfun=0 by default after power-up ?
Peter