15.1 uA with BG95M2 on UMTS&LTE_EVB 2.2

IoT Modules LPWA Module
1

Title says it all. When in pwrdown state, the module seems to be during 15ua based on reading across J103.

Powering via the power jack.

We are measuring using a Metrahit X-tra multimeter.

I am expecting <3ua based on documentation. Any guidance here?

We have our own board which we are working on testing low power, and it will be great to verify what we should be expecting on the EVB. Thanks

2

SInce there is some peripheral in EVB ， so if you need to test power consumption ， pls disconnect these peripheral . thanks

for the tip to how to disconnect these peripheral , pls refer to the below link ：

https://cnquectel-my.sharepoint.com/:f:/g/personal/america-fae_quectel_com/EpOFMuh2bX5Co1VFSNtZOXUBdbPoSwgk1kGe3lVyv1jJOg?e=qlgWKI