=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2024.05.10 19:04:09 =~=~=~=~=~=~=~=~=~=~=~= Android Bootloader - UART_DM Initialized!!! [40] SPMI read command failure: cmd_id = 1, error = 2 [40] SPMI read command failure: cmd_id = 1, error = 2 [40] SPMI read command failure: cmd_id = 1, error = 2 [50] SPMI read command failure: cmd_id = 1, error = 2 [50] SPMI read command failure: cmd_id = 1, error = 2 [60] SPMI read command failure: cmd_id = 1, error = 2 [60] SPMI read command failure: cmd_id = 1, error = 2 [70] SPMI read command failure: cmd_id = 1, error = 2 [70] SPMI read command failure: cmd_id = 1, error = 2 [80] SPMI read command failure: cmd_id = 1, error = 2 [80] SPMI read command failure: cmd_id = 1, error = 2 [90] SPMI read command failure: cmd_id = 1, error = 2 [90] SPMI read command failure: cmd_id = 1, error = 2 [100] SPMI read command failure: cmd_id = 1, error = 2 [110] SPMI read command failure: cmd_id = 1, error = 2 [110] SPMI read command failure: cmd_id = 1, error = 2 [120] SPMI read command failure: cmd_id = 1, error = 2 [120] Qseecom Init Done in Appsbl version is 0x1001000 [130] secure app region addr=0x85b00000 size=0x800000[130] TZ App region notif returned with status:0 addr:85b00000 size:8388608 [140] TZ App log region register returned with status:0 addr:8f17f000 size:4096 [140] Qseecom TZ Init Done in Appsbl [160] Loading cmnlib done [170] Loading cmnlib64 done [190] <8>keymaster64: KEYMASTER Init [200] ERROR: Splash image header invalid [200] Not able to search the panel [210] [oem_panel_select] hw_id:0x8 [210] [oem_panel_select] platform_subtype:0x0 [210] [oem_panel_select] panel_id:0x1 [220] [LK_sn65dsi83_i2c_init] panel [220] [mipi2lvds_chip_reset] enter [320] [mipi2lvds_chip_reset] leave [320] richard: sn65dsi83 in I2C TP1 [330] QUP: I2C status flags :0x1121c4 [330] qup_i2c_xfer error -5 [330] QUP: I2C status flags :0x1121c4 [340] qup_i2c_xfer error -5 [340] QUP: I2C status flags :0x1121c4 [340] qup_i2c_xfer error -5 [340] [is_sn65dsi83] icn6202 [350] QUP: I2C status flags :0x1121c4 [350] qup_i2c_xfer error -5 [350] ----sn65dsi83_write_byte faile ont time return!----- [360] [LK_Mcu_Init] start 20220823 [370] SPMI read command failure: cmd_id = 1, error = 2 [370] SPMI read command failure: cmd_id = 1, error = 2 [380] [LK_Mcu_Init] 0x02 0x91,0x04,0x01,0x63,0xf7 [1380] [init_panel_data] panel_id:0x1 [1390] SPMI read command failure: cmd_id = 1, error = 2 [1400] SPMI read command failure: cmd_id = 1, error = 2 [1400] SPMI read command failure: cmd_id = 1, error = 2 [1410] SPMI read command failure: cmd_id = 1, error = 2 [1410] SPMI read command failure: cmd_id = 1, error = 2 [1420] SPMI read command failure: cmd_id = 1, error = 2 [1420] SPMI read command failure: cmd_id = 1, error = 2 [1430] SPMI read command failure: cmd_id = 1, error = 2 [1430] SPMI read command failure: cmd_id = 1, error = 2 [1440] SPMI read command failure: cmd_id = 1, error = 2 [1440] SPMI read command failure: cmd_id = 1, error = 2 [1450] SPMI read command failure: cmd_id = 1, error = 2 [1450] SPMI read command failure: cmd_id = 1, error = 2 [1460] SPMI read command failure: cmd_id = 1, error = 2 [1460] SPMI read command failure: cmd_id = 1, error = 2 [1470] SPMI read command failure: cmd_id = 1, error = 2 [1470] SPMI read command failure: cmd_id = 1, error = 2 [1480] SPMI read command failure: cmd_id = 1, error = 2 [1490] SPMI read command failure: cmd_id = 1, error = 2 [1490] SPMI read command failure: cmd_id = 1, error = 2 [1500] SPMI read command failure: cmd_id = 1, error = 2 [1500] SPMI read command failure: cmd_id = 1, error = 2 [1510] SPMI read command failure: cmd_id = 1, error = 2 [1510] SPMI read command failure: cmd_id = 1, error = 2 [1520] SPMI read command failure: cmd_id = 1, error = 2 [1520] SPMI read command failure: cmd_id = 1, error = 2 [1530] SPMI read command failure: cmd_id = 1, error = 2 [1530] SPMI read command failure: cmd_id = 1, error = 2 [1540] SPMI read command failure: cmd_id = 1, error = 2 [1540] SPMI read command failure: cmd_id = 1, error = 2 [1550] SPMI read command failure: cmd_id = 1, error = 2 [1550] SPMI read command failure: cmd_id = 1, error = 2 [1560] SPMI read command failure: cmd_id = 1, error = 2 [1560] SPMI read command failure: cmd_id = 1, error = 2 [1570] SPMI read command failure: cmd_id = 1, error = 2 [1570] SPMI read command failure: cmd_id = 1, error = 2 [1580] SPMI read command failure: cmd_id = 1, error = 2 [1580] SPMI read command failure: cmd_id = 1, error = 2 [1590] SPMI read command failure: cmd_id = 1, error = 2 [1650] ERROR: Splash image header invalid [2090] MultiSlot true, partition name boot_b [2100] AVB version 2 [2100] avb_slot_verify.c[2100] :[2100] 417[2100] : DEBUG: [2100] Loading vbmeta struct from partition '[2110] vbmeta_b[2110] '. [2120] ValidateV00000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff9975680000 - 0xffffff9976600000 ( 15872 KB) [ 0.000000] .rodata : 0xffffff9976600000 - 0xffffff9976e00000 ( 8192 KB) [ 0.000000] .init : 0xffffff9976e00000 - 0xffffff9977200000 ( 4096 KB) [ 0.000000] .data : 0xffffff9977200000 - 0xffffff9977391200 ( 1605 KB) [ 0.000000] .bss : 0xffffff9977391200 - 0xffffff99774ae784 ( 1142 KB) [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf90400000 - 0xffffffbf94000000 ( 60 MB actual) [ 0.000000] memory : 0xffffffe410000000 - 0xffffffe500000000 ( 3840 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] [ 0.000000] ********************************************************** [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000] ** ** [ 0.000000] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000] ** ** [ 0.000000] ** This means that this is a DEBUG kernel and it is ** [ 0.000000] ** unsafe for production use. ** [ 0.000000] ** ** [ 0.000000] ** If you see this message and you are not debugging ** [ 0.000000] ** the kernel, report this immediately to your vendor! ** [ 0.000000] ** ** [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000] ********************************************************** [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000022] clocksource: Switched to clocksource arch_sys_counter [ 0.001109] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.001124] pid_max: default: 32768 minimum: 301 [ 0.001206] Security Framework initialized [ 0.001216] SELinux: Initializing. [ 0.001312] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001321] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002515] /cpus/cpu@0: Missing clock-frequency property [ 0.002529] /cpus/cpu@1: Missing clock-frequency property [ 0.002541] /cpus/cpu@2: Missing clock-frequency property [ 0.002552] /cpus/cpu@3: Missing clock-frequency property [ 0.002565] /cpus/cpu@100: Missing clock-frequency property [ 0.002579] /cpus/cpu@101: Missing clock-frequency property [ 0.002593] /cpus/cpu@102: Missing clock-frequency property [ 0.002608] /cpus/cpu@103: Missing clock-frequency property [ 0.002716] sched-energy: Sched-energy-costs installed from DT [ 0.002732] ASID allocator initialised with 32768 entries [ 0.018727] cpu_clock_pwr_init: Power clocks configured [ 0.021624] MSM Memory Dump base table set up [ 0.021653] MSM Memory Dump apps data table set up [ 0.021809] EFI services will not be available. [ 0.030767] CPU1: Booted secondary processor [410fd034] [ 0.039443] CPU2: Booted secondary processor [410fd034] [ 0.048080] CPU3: Booted secondary processor [410fd034] [ 0.056844] CPU4: Booted secondary processor [410fd034] [ 0.065551] CPU5: Booted secondary processor [410fd034] [ 0.074240] CPU6: Booted secondary processor [410fd034] [ 0.082917] CPU7: Booted secondary processor [410fd034] [ 0.083194] Brought up 8 CPUs [ 0.083225] SMP: Total of 8 processors activated. [ 0.083235] CPU features: detected feature: 32-bit EL0 Support [ 0.083242] CPU features: kernel page table isolation forced OFF by command line option [ 0.083253] CPU: All CPU(s) started at EL1 [ 0.083332] alternatives: patching kernel code [ 0.083556] CPU7: update max cpu_capacity 1024 [ 0.090051] CPU7: update max cpu_capacity 1024 [ 0.148442] DMI not present or invalid. [ 0.148883] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.148902] futex hash table entries: 2048 (order: 6, 262144 bytes) [ 0.159049] pinctrl core: initialized pinctrl subsystem [ 0.159890] NET: Registered protocol family 16 [ 0.162891] schedtune: init normalization constants... [ 0.162904] schedtune: CLUSTER[0-3] min_pwr: 1 max_pwr: 180 [ 0.162912] schedtune: CPU[0] min_pwr: 1 max_pwr: 65 [ 0.162919] schedtune: CPU[1] min_pwr: 1 max_pwr: 65 [ 0.162927] schedtune: CPU[2] min_pwr: 1 max_pwr: 65 [ 0.162934] schedtune: CPU[3] min_pwr: 1 max_pwr: 65 [ 0.162942] schedtune: CLUSTER[4-7] min_pwr: 1 max_pwr: 175 [ 0.162949] schedtune: CPU[4] min_pwr: 1 max_pwr: 65 [ 0.162956] schedtune: CPU[5] min_pwr: 1 max_pwr: 65 [ 0.162963] schedtune: CPU[6] min_pwr: 1 max_pwr: 65 [ 0.162970] schedtune: CPU[7] min_pwr: 1 max_pwr: 65 [ 0.162977] schedtune: SYSTEM min_pwr: 10 max_pwr: 875 [ 0.162984] schedtune: using normalization constants mul: 789479538 sh1: 1 sh2: 9 [ 0.162989] schedtune: verify normalization constants... [ 0.162995] schedtune: max_pwr/2^0: 865 => norm_pwr: 1024 [ 0.163001] schedtune: max_pwr/2^1: 432 => norm_pwr: 511 [ 0.163007] schedtune: max_pwr/2^2: 216 => norm_pwr: 255 [ 0.163012] schedtune: max_pwr/2^3: 108 => norm_pwr: 127 [ 0.163018] schedtune: max_pwr/2^4: 54 => norm_pwr: 63 [ 0.163024] schedtune: max_pwr/2^5: 27 => norm_pwr: 31 [ 0.163029] schedtune: configured to support 5 boost groups [ 0.164888] cpuidle: using governor menu [ 0.166091] cpuidle: using governor qcom [ 0.171450] vdso: 2 pages (1 code @ ffffff9976607000, 1 data @ ffffff9977204000) [ 0.171473] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.172526] DMA: preallocated 256 KiB pool for atomic allocations [ 0.177567] smd_channel_probe_now: allocation table not initialized [ 0.178427] smd_channel_probe_now: allocation table not initialized [ 0.178901] smd_channel_probe_now: allocation table not initialized [ 0.179618] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches [ 0.180292] pm8953_s1: Bringing 1uV into 16-16uV [ 0.180854] pm8953_s2_level: Bringing 1uV into 16-16uV [ 0.181224] pm8953_s2_floor_level: Bringing 1uV into 16-16uV [ 0.182143] pm8953_s2_level_ao: Bringing 1uV into 16-16uV [ 0.184133] pm8953_s7_level_ao: Bringing 1uV into 16-16uV [ 0.194675] qcom,gcc-8953 1800000.qcom,gcc: Venus speed bin: 6 [ 0.210887] branch_clk_handoff: gcc_usb_phy_cfg_ahb_clk clock is enabled in HW [ 0.210898] branch_clk_handoff: even though ENABLE_BIT is not set [ 0.212240] qcom,gcc-8953 1800000.qcom,gcc: Registered GCC clocks [ 0.212778] msm8953-pinctrl 1000000.pinctrl: invalid resource [ 0.223300] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0 [ 0.230598] unable to find DT imem DLOAD mode node [ 0.232119] unable to find DT imem EDLOAD mode node [ 0.236497] sps:sps is ready. [ 0.239200] spmi spmi-0: PMIC arbiter version v2 (0x20010000) [ 0.240958] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 6 PVS Version: 0 [ 0.241050] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-pwrcl regulator!!! [ 0.242874] msm_watchdog b017000.qcom,wdt: wdog absent resource not present [ 0.243938] pm8953_s5_avs_limit: Bringing 0uV into 400000-400000uV [ 0.244174] spm_regulator_probe: name=pm8953_s5, range=LV, voltage=870000 uV, mode=AUTO, step rate=1200 uV/us [ 0.244258] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized [ 0.246632] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region@0 [ 0.248069] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0 [ 0.248274] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0 [ 0.248479] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0 [ 0.248623] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0 [ 0.249417] apc_mem_acc_corner: Bringing 0uV into 1-1uV [ 0.250230] cpr4_apss_read_fuse_data: apc_corner: speed bin = 6, CPR fusing revision = 3, foundry id = 1 [ 0.250241] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 0.250274] cpr4_msm8953_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 0.250370] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused LowSVS: open-loop= 625000 uV [ 0.250378] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 680000 uV [ 0.250385] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 785000 uV [ 0.250392] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused TURBO_L1: open-loop= 915000 uV [ 0.250445] cpr4_apss_calculate_target_quotients: apc_corner: fused LowSVS: quot[ 7]= 546 [ 0.250454] cpr4_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 633, quot_offset[ 7]= 85 [ 0.250462] cpr4_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 838, quot_offset[ 7]= 200 [ 0.250470] cpr4_apss_calculate_target_quotients: apc_corner: fused TURBO_L1: quot[ 7]=1076, quot_offset[ 7]= 235 [ 0.250626] cpr4_apss_init_aging: apc: sensor 6 aging init quotient diff = -2, aging RO scale = 2800 QUOT/V [ 0.250742] cpr3_regulator_init_ctrl: apc: Default CPR mode = HW closed-loop [ 0.251746] gfx_mem_acc_corner: Bringing 0uV into 1-1uV [ 0.252232] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 1: target-volt = 580000 uV [ 0.252241] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 2: target-volt = 650000 uV [ 0.252249] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 3: target-volt = 720000 uV [ 0.252261] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[1] 580000 -> 615000 [ 0.252269] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[2] 650000 -> 675000 [ 0.252278] GFX_LDO: msm_gfx_ldo_voltage_init: LDO-mode fuse disabled by default [ 0.286696] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL [ 0.286709] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled [ 0.286732] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22 [ 0.287298] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully [ 0.287336] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL [ 0.287345] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled [ 0.287367] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22 [ 0.288451] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock [ 0.288897] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully [ 0.292211] KPI: Bootloader start count = 17802 [ 0.292221] KPI: Bootloader end count = 134265 [ 0.292227] KPI: Bootloader display count = 72596 [ 0.292232] KPI: Bootloader load kernel count = 6967 [ 0.292239] KPI: Kernel MPM timestamp = 154171 [ 0.292244] KPI: Kernel MPM Clock frequency = 32768 [ 0.292269] socinfo_print: v0.10, id=338, ver=1.1, raw_id=154, raw_ver=0, hw_plat=8, hw_plat_ver=65536 [ 0.292269] accessory_chip=0, hw_plat_subtype=0, pmic_model=65558, pmic_die_revision=65536 foundry_id=2 serial_number=4005978233 [ 0.294818] arm-smmu 1c40000.arm,smmu-kgsl: Couldn't get clock: gpu_ahb_clk [ 0.295258] arm-smmu 1e00000.qcom,iommu: (IDR0.CTTW overridden by dma-coherent property) [ 0.295272] arm-smmu 1e00000.qcom,iommu: stream matching with 124 register groups, mask 0x7fff [ 0.295389] arm-smmu 1e00000.qcom,iommu: found 32 context interrupt(s) but have 30 context banks. assuming 30 context interrupts. [ 0.296215] iommu: Adding device soc:qcom,msm-audio-ion to group 0 [ 0.300632] SCSI subsystem initialized [ 0.300848] usbcore: registered new interface driver usbfs [ 0.300897] usbcore: registered new interface driver hub [ 0.301239] usbcore: registered new device driver usb [ 0.302613] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pm8953@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot [ 0.302641] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pm8953@0:qcom,power-on@800: PMIC@SID0: Unknown power-off reason [ 0.302954] input: qpnp_pon as /devices/virtual/input/input0 [ 0.304424] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2 [ 0.304510] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.304523] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) [ 0.304805] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.305765] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2 [ 0.305827] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.305837] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) [ 0.305975] i2c-msm-v2 78b7000.i2c: irq:73 when no active transfer [ 0.306064] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.306466] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2 [ 0.306514] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.306523] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem) [ 0.306745] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.307280] media: Linux media interface: v0.10 [ 0.307320] Linux video capture interface: v2.00 [ 0.321029] EDAC MC: Ver: 3.0.0 [ 0.322641] dmi: Firmware registration failed. [ 0.323928] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0 [ 0.324082] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0 [ 0.324233] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region [ 0.324484] ION heap system created [ 0.324773] ION heap mm created at 0x00000000f4800000 with size b400000 [ 0.324790] ION heap qsecom created at 0x00000000f3800000 with size 1000000 [ 0.324803] ION heap qsecom_ta created at 0x00000000f3400000 with size 400000 [ 0.326266] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.326274] ipa ipa_init:4016 fail to register with bus mgr! [ 0.326400] ipa ipa_plat_drv_probe:5046 ipa_init failed [ 0.327129] type = 22 [ 0.327138] PMIC@SID0: PM8953 v1.0 options: 2, 2, 0, 0 [ 0.329673] Advanced Linux Sound Architecture Driver Initialized. [ 0.330230] Bluetooth: Core ver 2.22 [ 0.330265] NET: Registered protocol family 31 [ 0.330272] Bluetooth: HCI device and connection manager initialized [ 0.330285] Bluetooth: HCI socket layer initialized [ 0.330300] Bluetooth: L2CAP socket layer initialized [ 0.330880] NetLabel: Initializing [ 0.330887] NetLabel: domain hash size = 128 [ 0.330892] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.330946] NetLabel: unlabeled traffic allowed by default [ 0.331492] gcc_oxili_gfx3d_clk: set OPP pair(19200000 Hz: 615000 uV) on 1c00000.qcom,kgsl-3d0 [ 0.331832] gcc_oxili_gfx3d_clk: set OPP pair(200000000 Hz: 675000 uV) on 1c00000.qcom,kgsl-3d0 [ 0.332284] gcc_oxili_gfx3d_clk: set OPP pair(600000000 Hz: 0 uV) on 1c00000.qcom,kgsl-3d0 [ 0.332631] gcc-gfx-8953 1800000.qcom,gcc-gfx: Registered GCC GFX clocks. [ 0.332723] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 6 PVS Version: 0 [ 0.336211] cpr3_regulator_measure_aging: apc: average quotient delta=-4 (count=10) [ 0.336235] cpr3_regulator_aging_adjust: apc: aging measurement successful; aging reference adjustment voltage=0 uV [ 0.337063] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c0 [ 0.337074] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-0 [ 0.337085] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c0 [ 0.337094] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-0 [ 0.337104] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c0 [ 0.337113] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-0 [ 0.337120] ramp_lmh_sid: Use Default LMH SID [ 0.337126] ramp_dfs_sid: Use Default DFS SID [ 0.337131] ramp_link_sid: Use Default Link SID [ 0.337175] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c1 [ 0.337183] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-1 [ 0.337193] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c1 [ 0.337202] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-1 [ 0.337212] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c1 [ 0.337220] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-1 [ 0.337226] ramp_lmh_sid: Use Default LMH SID [ 0.337231] ramp_dfs_sid: Use Default DFS SID [ 0.337235] ramp_link_sid: Use Default Link SID [ 0.337283] clock_rcgwr_init: RCGwR Init Completed [ 0.339712] populate_opp_table: clock-cpu-8953: OPP tables populated (cpu 3 and 7) [ 0.339720] print_opp_table: clock_cpu: a53 C0: OPP voltage for 652800000: 1 [ 0.339726] print_opp_table: clock_cpu: a53 C0: OPP voltage for 1804800000: 5 [ 0.339733] print_opp_table: clock_cpu: a53 C1: OPP voltage for 652800000: 1 [ 0.339739] print_opp_table: clock_cpu: a53 C2: OPP voltage for 1804800000: 5 [ 0.339972] sched-energy energy-costs: cpu=0 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.339980] CPU0: update cpu_capacity 1024 [ 0.339991] sched-energy energy-costs: cpu=1 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.339997] CPU1: update cpu_capacity 1024 [ 0.340008] sched-energy energy-costs: cpu=2 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340013] CPU2: update cpu_capacity 1024 [ 0.340101] sched-energy energy-costs: cpu=3 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340107] CPU3: update cpu_capacity 1024 [ 0.340119] sched-energy energy-costs: cpu=4 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340124] CPU4: update cpu_capacity 1024 [ 0.340135] sched-energy energy-costs: cpu=5 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340140] CPU5: update cpu_capacity 1024 [ 0.340151] sched-energy energy-costs: cpu=6 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340156] CPU6: update cpu_capacity 1024 [ 0.340167] sched-energy energy-costs: cpu=7 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340172] CPU7: update cpu_capacity 1024 [ 0.341532] sched-energy energy-costs: Sched-energy-costs capacity updated [ 0.341747] gdsc_oxili_gx: supplied by msm_gfx_ldo [ 0.343004] arm-smmu 1c40000.arm,smmu-kgsl: (IDR0.CTTW overridden by dma-coherent property) [ 0.343016] arm-smmu 1c40000.arm,smmu-kgsl: stream matching with 4 register groups, mask 0x7fff [ 0.346089] cpufreq: driver msm up and running [ 0.346302] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.346305] ipa ipa_init:4016 fail to register with bus mgr! [ 0.346347] ipa ipa_plat_drv_probe:5046 ipa_init failed [ 0.347118] clocksource: Switched to clocksource arch_sys_counter [ 0.350082] CPU4: update max cpu_capacity 1024 [ 0.377154] VFS: Disk quotas dquot_6.6.0 [ 0.377196] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.377244] msm_bus_fabric_init_driver [ 0.381540] msm_bus_device 580000.ad-hoc-bus: Bus scaling driver probe successful [ 0.382561] NET: Registered protocol family 2 [ 0.382980] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.383158] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.383498] TCP: Hash tables configured (established 32768 bind 32768) [ 0.383540] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.383591] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.383735] NET: Registered protocol family 1 [ 0.384425] gcc-mdss-8953 1800000.qcom,gcc-mdss: Registered GCC MDSS clocks. [ 0.386138] ipa ipa2_uc_state_check:297 uC interface not initialized [ 0.386148] ipa ipa_sps_irq_control_all:963 EP (2) not allocated. [ 0.386153] ipa ipa_sps_irq_control_all:963 EP (5) not allocated. [ 0.388484] sps:BAM 0x0000000007904000 is registered. [ 0.389933] sps:BAM 0x0000000007904000 (va:0xffffff8009040000) enabled: ver:0x27, number of pipes:20 [ 0.395073] IPA driver initialization was successful. [ 0.395408] Trying to unpack rootfs image as initramfs... [ 0.536560] Freeing initrd memory: 6352K [ 0.537657] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.540500] audit: initializing netlink subsys (disabled) [ 0.540532] audit: type=2000 audit(0.539:1): initialized [ 0.541049] workingset: timestamp_bits=62 max_order=20 bucket_order=0 [ 0.544979] Registering sdcardfs 0.1 [ 0.545118] fuse init (API version 7.26) [ 0.545494] exFAT: Core Version 1.2.24 [ 0.545498] exFAT: FS Version 1.2.24 [ 0.545725] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully [ 0.545728] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully [ 0.545733] pfk [pfk_init]: Driver initialized successfully [ 0.548396] io scheduler noop registered [ 0.548545] io scheduler cfq registered (default) [ 0.555911] pmi632 do not exist!! [ 0.555941] dsi1_bridge soc:qcom,dsi1_bridge: dsi1_bridge_probe success. [ 0.556103] msm_mdss_get_res_byname: 'vbif_nrt_phys' resource not found [ 0.556115] mdss_mdp_probe+0x1a4/0x1318->msm_mdss_ioremap_byname: 'vbif_nrt_phys' msm_mdss_get_res_byname failed [ 0.556302] mdss_mdp_irq_clk_register: unable to get clk: lut_clk [ 0.556313] mdss_mdp_irq_clk_register: unable to get clk: mnoc_clk [ 0.556613] No change in context(0==0), skip [ 0.557304] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0 [ 0.557318] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1 [ 0.557322] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2 [ 0.557333] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3 [ 0.557344] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0 [ 0.557353] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read [ 0.557434] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read [ 0.557440] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-bus-througput-factor : u32 array read [ 0.557627] xlog_status: enable:1, panic:1, dump:2 [ 0.557856] iommu: Adding device 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_unsec_cb to group 1 [ 0.558052] iommu: Adding device 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_sec_cb to group 2 [ 0.558224] mdss_mdp_probe: mdss version = 0x10100000, bootloader display is on, num 1, intf_sel=0x00000100 [ 0.559812] mdss_smmu_util_parse_dt_clock: clocks are not defined [ 0.559822] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful! [ 0.559839] mdss_smmu_util_parse_dt_clock: clocks are not defined [ 0.559845] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful! [ 0.560254] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.560263] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.560271] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.560768] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0 [ 0.560869] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_ckx_lvds1280x480_video:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_ckx_lvds1280x480_video [ 0.560895] mdss_dsi_panel_init: Panel Name = ckx lvds1280x480 video mode dsi panel [ 0.560987] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_ckx_lvds1280x480_video" (ffffffe4ed06b288) [ 0.560994] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-on-command [ 0.560999] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command [ 0.561004] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command [ 0.561007] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node: [ 0.561066] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-off-command [ 0.561071] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command [ 0.561075] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command [ 0.561090] mdss_dsi_parse_panel_features: ulps feature disabled [ 0.561094] mdss_dsi_parse_panel_features: ulps during suspend feature disabled [ 0.561099] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0 [ 0.561111] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on [ 0.561116] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off [ 0.561152] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.561158] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.561237] mdss_dsi_parse_ctrl_params:4189 Unable to read qcom,display-id, data=0000000000000000,len=20 [ 0.561246] mdss_dsi_parse_gpio_params: bklt_en gpio not specified [ 0.561251] mdss_dsi_parse_gpio_params: ext vdd gpio not specified [ 0.561255] ----ctrl_pdata->rst_gpio:61----- [ 0.561288] msm_mdss_get_res_byname: 'dsi_phy_regulator' resource not found [ 0.561299] mdss_dsi_retrieve_ctrl_resources+0xc8/0x230->msm_mdss_ioremap_byname: 'dsi_phy_regulator' msm_mdss_get_res_byname failed [ 0.561304] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8008739000 ctrl_size=400 phy_base=ffffff800873b400 phy_size=580 [ 0.561425] dsi_panel_device_register: Continuous splash enabled [ 0.561566] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0 [ 0.562373] [mdss_dsi_request_gpios] gpio_request disp_rst_n suc [ 0.563187] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x2 [ 0.563481] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1 [ 0.563591] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_ckx_lvds1280x480_video:1:none:cfg:single_dsi panel_name:none [ 0.563595] mdss_dsi_config_panel: can't find panel node 0:qcom,mdss_dsi_ckx_lvds1280x480_video:1:none:cfg:single_dsi [ 0.563598] mdss_dsi_ctrl_probe: panel configuration failed [ 0.563612] mdss_dsi_ctrl: probe of 1a96000.qcom,mdss_dsi_ctrl1 failed with error -22 [ 0.563881] mdss_dsi_status_init: DSI status check interval:5000 [ 0.564417] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel [ 0.564924] mdss_fb_probe: fb0: split_mode:0 left:0 right:0 [ 0.565272] mdss_fb_register: FrameBuffer[0] 1280x480 registered successfully! [ 0.565469] mdss_fb_probe: fb1: split_mode:0 left:0 right:0 [ 0.565530] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully! [ 0.565583] mdss_mdp_splash_parse_dt: splash mem child node is not present [ 0.565767] qcom-sps-dma 7884000.qcom,sps-dma: dma_async_device_register: device has no channels! [ 0.565793] qcom-sps-dma 7ac4000.qcom,sps-dma: dma_async_device_register: device has no channels! [ 0.568511] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 0.568519] hyp_assign_table: Failed to assign memory protection, ret = -5 [ 0.568523] memshare: hyp_assign_phys failed size=2097152 err=-5 [ 0.568549] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped. [ 0.568758] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped. [ 0.570476] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 0.570481] hyp_assign_table: Failed to assign memory protection, ret = -5 [ 0.570485] memshare: hyp_assign_phys failed size=5242880 err=-5 [ 0.570494] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped. [ 0.571925] minidump-id not found for a506_zap [ 0.571943] subsys-pil-tz soc:qcom,kgsl-hyp: for a506_zap segments only will be dumped. [ 0.572317] minidump-id not found for adsp [ 0.572411] minidump-id not found for wcnss [ 0.572577] minidump-id not found for venus [ 0.572588] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped. [ 0.573592] minidump-id not found for modem [ 0.574819] wcnss: wcnss_wlan probed in built-in mode [ 0.575355] msm_serial 78af000.serial: msm_serial: detected port #0 [ 0.575373] msm_serial 78af000.serial: uartclk = 7372800 [ 0.575408] 78af000.serial: ttyHSL0 at MMIO 0x78af000 (irq = 66, base_baud = 460800) is a MSM [ 0.575416] msm_serial: console setup on port #0 [ 3.600412] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR [ 3.600415] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR [ 3.695195] console [ttyHSL0] enabled [ 3.703436] msm_serial 7aef000.serial: msm_serial: detected port #1 [ 3.706816] msm_serial 7aef000.serial: uartclk = 19200000 [ 3.712921] 7aef000.serial: ttyHSL1 at MMIO 0x7aef000 (irq = 67, base_baud = 1200000) is a MSM [ 3.718592] msm_serial 78b0000.serial: msm_serial: detected port #2 [ 3.726969] msm_serial 78b0000.serial: uartclk = 7372800 [ 3.733124] 78b0000.serial: ttyHSL2 at MMIO 0x78b0000 (irq = 68, base_baud = 460800) is a MSM [ 3.738972] msm_serial: driver initialized [ 3.747646] msm_serial_hs module loaded [ 3.752722] random: fast init done [ 3.754910] random: crng init done [ 3.762612] diag: In __diag_glink_init, unable to register for glink channel DIAG_CTRL [ 3.762796] diag: In __diag_glink_init, unable to register for glink channel DIAG_DATA [ 3.769688] diag: In __diag_glink_init, unable to register for glink channel DIAG_CMD [ 3.777590] diag: In __diag_glink_init, unable to register for glink channel DIAG_DCI_DATA [ 3.785539] diag: In __diag_glink_init, unable to register for glink channel DIAG_DCI_CMD [ 3.796577] iommu: Adding device 1c40000.qcom,kgsl-iommu:gfx3d_user to group 3 [ 3.802029] platform 1c40000.qcom,kgsl-iommu:gfx3d_secure: assigned reserved memory node secure_region@0 [ 3.809124] iommu: Adding device 1c40000.qcom,kgsl-iommu:gfx3d_secure to group 4 [ 3.827817] brd: module loaded [ 3.830889] loop: module loaded [ 3.831260] zram: Added device: zram0 [ 3.833675] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1001000 [ 3.836661] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE[ 3.843100] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem [ 3.850721] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0 [ 3.856966] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1 [ 3.866458] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0xc (ok) [ 3.868902] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1 [ 3.872379] qce 720000.qcedev: QTI Crypto 5.3.3 device found @0x720000 [ 3.872384] qce 720000.qcedev: CE device = 0x0 IO base, CE = ffffff8009440000 Consumer (IN) PIPE 2, [ 3.872384] Producer (OUT) PIPE 3 IO base BAM = 0000000000000000 [ 3.872384] BAM IRQ 65 Engines Availability = 0x2010853 [ 3.872693] sps:BAM 0x0000000000704000 is registered. [ 3.872693] sps:BAM 0x0000000000704000 (va:0xffffff80096a0000) enabled: ver:0x27, number of pipes:8 [ 3.872857] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000000704000 irq 65 [ 3.879556] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1 [ 3.879895] qcrypto 720000.qcrypto: QTI Crypto 5.3.3 device found @0x720000 [ 3.879899] qcrypto 720000.qcrypto: CE device = 0x0 IO base, CE = ffffff80097a0000 Consumer (IN) PIPE 4, [ 3.879899] Producer (OUT) PIPE 5 IO base BAM = 0000000000000000 [ 3.879899] BAM IRQ 65 Engines Availability = 0x2010853 [ 3.880223] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000000704000 irq 65 [ 3.888705] qcrypto 720000.qcrypto: qcrypto-ecb-aes [ 3.888832] qcrypto 720000.qcrypto: qcrypto-cbc-aes [ 3.888921] qcrypto 720000.qcrypto: qcrypto-ctr-aes [ 3.889008] qcrypto 720000.qcrypto: qcrypto-ecb-des [ 3.889092] qcrypto 720000.qcrypto: qcrypto-cbc-des [ 3.889165] qcrypto 720000.qcrypto: qcrypto-ecb-3des [ 3.889241] qcrypto 720000.qcrypto: qcrypto-cbc-3des [ 3.889313] qcrypto 720000.qcrypto: qcrypto-xts-aes [ 3.889386] qcrypto 720000.qcrypto: qcrypto-sha1 [ 3.889458] qcrypto 720000.qcrypto: qcrypto-sha256 [ 3.889530] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes [ 3.889603] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des [ 3.889679] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des [ 3.889750] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes [ 3.889822] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des [ 3.889895] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des [ 3.889969] qcrypto 720000.qcrypto: qcrypto-hmac-sha1 [ 3.890060] qcrypto 720000.qcrypto: qcrypto-hmac-sha256 [ 3.890133] qcrypto 720000.qcrypto: qcrypto-aes-ccm [ 3.890205] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm [ 3.890726] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed [ 3.890776] ICE IRQ = 118 [ 3.891289] SCSI Media Changer driver v0.25 [ 3.892207] libphy: Fixed MDIO Bus: probed [ 3.892209] tun: Universal TUN/TAP device driver, 1.6 [ 3.892211] tun: (C) 1999-2004 Max Krasnyansky [ 3.892247] PPP generic driver version 2.4.2 [ 3.892294] PPP BSD Compression module registered [ 3.892296] PPP Deflate Compression module registered [ 3.892308] PPP MPPE Compression module registered [ 3.892310] NET: Registered protocol family 24 [ 3.892426] usbcore: registered new interface driver asix [ 3.892469] usbcore: registered new interface driver ax88179_178a [ 3.892487] usbcore: registered new interface driver cdc_ether [ 3.892505] usbcore: registered new interface driver net1080 [ 3.892524] usbcore: registered new interface driver cdc_subset [ 3.892542] usbcore: registered new interface driver zaurus [ 3.892567] usbcore: registered new interface driver cdc_ncm [ 3.892570] CHRDEV "uio" major number 233 goes below the dynamic allocation range [ 3.893563] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 3.893565] hyp_assign_table: Failed to assign memory protection, ret = -5 [ 3.893570] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000f2f00000 size=1572864 err=-5 [ 3.893641] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs' [ 3.893990] msm_sharedmem: sharedmem_register_qmi: qmi init successful [ 3.900541] msm-dwc3 7000000.ssusb: unable to get dbm device [ 3.901342] CHRDEV "usbmon" major number 232 goes below the dynamic allocation range [ 3.901394] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.901396] ehci-platform: EHCI generic platform driver [ 3.901742] ehci-msm: Qualcomm On-Chip EHCI Host Controller [ 3.902475] usbcore: registered new interface driver cdc_acm [ 3.902476] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 3.902503] usbcore: registered new interface driver usb-storage [ 3.902519] usbcore: registered new interface driver ums-alauda [ 3.902535] usbcore: registered new interface driver ums-cypress [ 3.902552] usbcore: registered new interface driver ums-datafab [ 3.902567] usbcore: registered new interface driver ums-freecom [ 3.902584] usbcore: registered new interface driver ums-isd200 [ 3.902600] usbcore: registered new interface driver ums-jumpshot [ 3.902616] usbcore: registered new interface driver ums-karma [ 3.902632] usbcore: registered new interface driver ums-onetouch [ 3.902648] usbcore: registered new interface driver ums-sddr09 [ 3.902663] usbcore: registered new interface driver ums-sddr55 [ 3.902679] usbcore: registered new interface driver ums-usbat [ 3.902724] usbcore: registered new interface driver usbserial [ 3.902743] usbcore: registered new interface driver usb_ehset_test [ 3.902761] usbcore: registered new interface driver lvs [ 3.902788] CHRDEV "ttyGS" major number 231 goes below the dynamic allocation range [ 3.903766] CHRDEV "rmnet_ctrl" major number 230 goes below the dynamic allocation range [ 3.904143] mousedev: PS/2 mouse device common for all mice [ 3.904260] [touch][goodix_ts_init] enter [ 3.904569] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0xf (ok) [ 3.904765] [touch][goodix_ts_probe] enter 0x5d [ 3.904767] [goodix_parse_dt] enter [ 3.904774] [goodix_parse_dt] pdata->driver_send_cfg : 0 [ 3.904789] [goodix_parse_dt] 22,23,20,21,36 [ 3.904805] gtp_request_io_port -> set hub switch to low! [ 4.210056] gtp_request_io_port -> set wakeup state pin to high! [ 4.210113] Goodix-TS 3-005d: Regulator get failed avdd ret=-19 [ 4.213971] Goodix-TS 3-005d: Can not lookup pmx_ts_release pinstate -19 [ 4.221327] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0xc MSTR_STS:0x0d1300c8 OPER:0x00000010 [ 4.221342] check_ds927_exist 0x00 = 0x0 [ 4.376612] [gtp_read_fw_version] g_fw_ver:0x1060 [ 4.381916] [gtp_check_product_id] g_product_id:911 [ 4.386070] [gt9xx_read_vendor_id] g_vendor_id:0x0 [ 4.393972] [gt9xx_read_resolution] x_resolution:1280,y_resolution=480 [ 4.393973] [CheckTouchType] CHIP_GT9XX_PUBLIC default! [ 4.393974] [touch][goodix_ts_probe] 0 [ 4.393985] [gtp_request_input_dev] abs_x_max:1280,abs_y_max:480 [ 4.394078] input: Goodix-CTP as /devices/virtual/input/input1 [ 4.394397] Goodix-TS 3-005d: GTP works in interrupt mode. [ 4.394980] qcom,qpnp-rtc 200f000.qcom,spmi:qcom,pm8953@0:qcom,pm8953_rtc: rtc core: registered qpnp_rtc as rtc0 [ 4.395288] i2c /dev entries driver [ 4.398550] iommu: Adding device 1d00000.qcom,vidc:non_secure_cb to group 5 [ 4.399045] iommu: Adding device 1d00000.qcom,vidc:secure_bitstream_cb to group 6 [ 4.399413] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 4.399416] hyp_assign_table: Failed to assign memory protection, ret = -5 [ 4.399493] iommu: Adding device 1d00000.qcom,vidc:secure_pixel_cb to group 7 [ 4.399809] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 4.399811] hyp_assign_table: Failed to assign memory protection, ret = -5 [ 4.399889] iommu: Adding device 1d00000.qcom,vidc:secure_non_pixel_cb to group 8 [ 4.400208] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 4.400210] hyp_assign_table: Failed to assign memory protection, ret = -5 [ 4.404186] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 9 [ 4.404353] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 6, cb->name: :vfe sid [0] = 1024 [ 4.404353] , [ 4.404419] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 6, cb->name: :vfe sid [1] = 10240 [ 4.404419] , [ 4.404420] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb3 to group 10 [ 4.404582] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 3, cb->name: :cpp sid [0] = 7168 [ 4.404582] , [ 4.404582] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 11 [ 4.405885] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 3, cb->name: :jpeg_enc0 sid [0] = 6144 [ 4.405885] , [ 4.405885] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts [ 4.407665] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts [ 4.407839] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts [ 4.407947] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts [ 4.408424] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts [ 4.408554] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts [ 4.408676] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts [ 4.409130] msm_actuator_platform_probe:1987 msm_actuator_platform_probe: No/Error Actuator GPIOs [ 4.409190] msm_actuator_platform_probe:1987 msm_actuator_platform_probe: No/Error Actuator GPIOs [ 4.409696] msm_eeprom_platform_probe failed 1780 [ 4.410039] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 [ 4.516272] msm_cci_init:1442: hw_version = 0x10020005 [ 4.610040] msm_cci_wait: 306 wait for queue: 0 [ 4.710038] msm_cci_flush_queue:176 wait timeout [ 4.710062] msm_cci_transfer_end: 558 failed rc -110 [ 4.710064] msm_cci_data_queue: 816 failed rc -110 [ 4.710066] msm_camera_cci_i2c_write: line 134 rc = -110 [ 4.730037] read_eeprom_memory: page write failed [ 4.730038] msm_eeprom_platform_probe read_eeprom_memory failed [ 4.775386] spmi spmi-0: error: impermissible write to peripheral sid:0 addr:0xc141 [ 4.780847] qcom-spmi-gpio 200f000.qcom,spmi:qcom,pm8953@0:pinctrl@c000: write 0x41 failed [ 4.788476] nq-nci 5-0028: nqx_probe: cannot set direction for nfc clkreq gpio [1275] [ 4.796822] nq-nci 5-0028: nqx_probe: probing nqxx failed, check hardware [ 4.816301] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@1 failed with error -110 [ 4.816489] msm_eeprom_platform_probe failed 1780 [ 4.828495] MSM-CPP cpp_init_hardware:1133 CPP HW Version: 0x40030003 [ 4.828517] MSM-CPP cpp_init_hardware:1151 stream_cnt:0 [ 4.834507] MSM-CPP cpp_release_hardware:1214 cpp hw release done [ 4.841189] CAM-SOC msm_camera_get_reg_base:870 err: mem resource vfe_fuse not found [ 4.845667] CAM-SOC msm_camera_get_res_size:913 err: mem resource vfe_fuse not found [ 4.853594] msm_vfe47_get_clks: cannot find camss_vfe_stream_clk [ 4.862093] CAM-SOC msm_camera_get_reg_base:870 err: mem resource vfe_fuse not found [ 4.867195] CAM-SOC msm_camera_get_res_size:913 err: mem resource vfe_fuse not found [ 4.875011] msm_vfe47_get_clks: cannot find camss_vfe_stream_clk [ 4.883986] __msm_jpeg_init:1551] Jpeg Device id 0[ 4.888761] CHRDEV "jpeg0" major number 229 goes below the dynamic allocation range [ 4.897307] TYPEC: qpnp_typec_probe: TypeC successfully probed state=0 CC-line-state=2 [ 4.902098] thermal thermal_zone1: failed to read out thermal zone (-517) [ 4.931750] md: linear personality registered for level -1 [ 4.931857] device-mapper: uevent: version 1.0.3 [ 4.936242] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 4.941094] device-mapper: req-crypt: dm-req-crypt successfully initalized. [ 4.941094] [ 4.949899] CHRDEV "bt" major number 228 goes below the dynamic allocation range [ 4.957888] sdhci: Secure Digital Host Controller Interface driver [ 4.965164] sdhci: Copyright(c) Pierre Ossman [ 4.971110] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.977047] sdhci_msm 7824900.sdhci: failed opening nvmem cell err : -2 [ 4.978336] usbcore: registered new interface driver usbhid [ 4.978338] usbhid: USB HID core driver [ 4.978455] ashmem: initialized [ 4.978631] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm [ 5.000111] qcom_ice_get_pdevice: found ice device ffffffe4e9f9a000 [ 5.008770] qcom_ice_get_pdevice: matching platform device ffffffe4ebd1b400 [ 5.010051] IC works normally, Write 0x8040 0xAA [ 5.024969] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff8009628000 [ 5.027312] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 64-bit ADMA in CMDQ mode [ 5.107064] mmc0: Out-of-interrupt timeout is 100[ms] [ 5.107081] mmc0: eMMC FW version: 0x01 [ 5.111088] mmc0: CMDQ supported: depth: 16 [ 5.114720] mmc0: cache barrier support 0 flush policy 0 [ 5.129759] cmdq_host_alloc_tdl: desc_size: 768 data_sz: 63488 slot-sz: 24 [ 5.129914] mmc0: CMDQ enabled on card [ 5.135528] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 5.141802] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=-1 [ 5.145757] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=-1 [ 5.153237] mmcblk0: mmc0:0001 RP64MB 58.2 GiB [ 5.161898] mmcblk0rpmb: mmc0:0001 RP64MB partition 3 16.0 MiB [ 5.167001] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56 p57 p58 p59 p60 p61 [ 5.175135] gpio = 1278 [ 5.193945] vbus_det_irq = 88 [ 5.196097] usbid_gpio = 1 [ 5.199254] id_det_irq = 277 [ 5.201846] qcom,gpio-usbdetect soc:qcom,usb_detect: starting usb HOST [ 5.204941] tz_log 8600720.tz-log: Hyp log service is not supported [ 5.205450] -----enter Func: [ ext_attr_init ]------ [ 5.205802] [ ext_attr_probe ] enter [ 5.205819] [ ext_attr_probe ] leave [ 5.205961] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x15 (ok) [ 5.206007] -----enter Func: [ icn6202_probe ]------ [ 5.206046] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 5.206084] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 5.206114] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 5.206124] Icn6202_mipi2lvds 2-002d: I2C retry times: 3 [ 5.206277] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x0d1343c8 OPER:0x00000010 [ 5.206290] TP0:I2C3: and TP1:i2c2 all no find chip! [ 5.206491] Icn6202_mipi2lvds: probe of 2-002d failed with error 1 [ 5.206532] -----leave Func: [ ext_attr_init ]------ [ 5.323602] sdhci_msm 7864900.sdhci: failed opening nvmem cell err : -2 [ 5.326660] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled [ 5.347394] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 64-bit ADMA in legacy mode [ 5.377336] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered. [ 5.381917] coresight-tmc 6028000.tmc: failed to get flush cti [ 5.383090] coresight-tmc 6028000.tmc: failed to get reset cti [ 5.388993] coresight-tmc 6028000.tmc: failed to get csr, defer probe [ 5.394945] coresight-tmc 6027000.tmc: failed to get flush cti [ 5.401345] coresight-tmc 6027000.tmc: failed to get reset cti [ 5.407049] coresight-tmc 6027000.tmc: failed to get csr, defer probe [ 5.414436] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized [ 5.419512] coresight-stm 6002000.stm: stm_register_device failed, probing deffered [ 5.427714] OF: graph: no port node found in /soc/cti@6010000 [ 5.434665] OF: graph: no port node found in /soc/cti@6011000 [ 5.440602] OF: graph: no port node found in /soc/cti@6012000 [ 5.446275] OF: graph: no port node found in /soc/cti@6013000 [ 5.452078] OF: graph: no port node found in /soc/cti@6014000 [ 5.457736] OF: graph: no port node found in /soc/cti@6015000 [ 5.463486] OF: graph: no port node found in /soc/cti@6016000 [ 5.469196] OF: graph: no port node found in /soc/cti@6017000 [ 5.474944] OF: graph: no port node found in /soc/cti@6018000 [ 5.480668] OF: graph: no port node found in /soc/cti@6019000 [ 5.486379] OF: graph: no port node found in /soc/cti@601a000 [ 5.492121] OF: graph: no port node found in /soc/cti@601b000 [ 5.497839] OF: graph: no port node found in /soc/cti@601c000 [ 5.503600] OF: graph: no port node found in /soc/cti@601d000 [ 5.509297] OF: graph: no port node found in /soc/cti@601e000 [ 5.515037] OF: graph: no port node found in /soc/cti@601f000 [ 5.520777] OF: graph: no port node found in /soc/cti@6198000 [ 5.526497] OF: graph: no port node found in /soc/cti@6199000 [ 5.532241] OF: graph: no port node found in /soc/cti@619a000 [ 5.537951] OF: graph: no port node found in /soc/cti@619b000 [ 5.543755] OF: graph: no port node found in /soc/cti@61b8000 [ 5.549418] OF: graph: no port node found in /soc/cti@61b9000 [ 5.555219] OF: graph: no port node found in /soc/cti@61ba000 [ 5.560921] OF: graph: no port node found in /soc/cti@61bb000 [ 5.566612] OF: graph: no port node found in /soc/cti@6128000 [ 5.572334] OF: graph: no port node found in /soc/cti@6124000 [ 5.578050] OF: graph: no port node found in /soc/cti@6134000 [ 5.583812] OF: graph: no port node found in /soc/cti@6139000 [ 5.589512] OF: graph: no port node found in /soc/cti@613c000 [ 5.595258] OF: graph: no port node found in /soc/cti@610c000 [ 5.601175] OF: graph: no port node found in /soc/csr@6001000 [ 5.606656] coresight-csr 6001000.csr: CSR initialized: coresight-csr [ 5.612845] OF: graph: no port node found in /soc/hwevent@6101000 [ 5.618815] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized [ 5.625596] CHRDEV "sensors" major number 227 goes below the dynamic allocation range [ 5.632894] gpio_clk soc:qcom,gpioclk: gpio_set_clocks_default: set clock rate: 10000 [ 5.640078] gpio_clk soc:qcom,gpioclk: gpio_clk_probe success [ 5.647885] proc create [ 5.653662] quec_devinfo init success! [ 5.655827] fulinux I am here [ 5.659766] usbcore: registered new interface driver snd-usb-audio [ 5.663429] u32 classifier [ 5.668759] Actions configured [ 5.671472] Netfilter messages via NETLINK v0.30. [ 5.674988] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 5.679760] ctnetlink v0.93: registering with nfnetlink. [ 5.686005] xt_time: kernel timezone is -0000 [ 5.691139] IPv4 over IPsec tunneling driver [ 5.695611] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.699807] arp_tables: arp_tables: (C) 2002 David S. Miller [ 5.705008] Initializing XFRM netlink socket [ 5.710819] NET: Registered protocol family 10 [ 5.715564] mip6: Mobile IPv6 [ 5.719118] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 5.722583] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.728004] NET: Registered protocol family 17 [ 5.733285] NET: Registered protocol family 15 [ 5.737789] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 5.742255] Ebtables v2.0 registered [ 5.755435] l2tp_core: L2TP core driver, V2.0 [ 5.758873] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 5.763138] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 5.767822] l2tp_netlink: L2TP netlink interface [ 5.773316] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 5.778140] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 5.783902] sctp: Hash tables configured (bind 256/256) [ 5.791106] NET: Registered protocol family 27 [ 5.795659] spmi spmi-0: error: impermissible write to peripheral sid:0 addr:0xc441 [ 5.799935] qcom-spmi-gpio 200f000.qcom,spmi:qcom,pm8953@0:pinctrl@c000: write 0x41 failed [ 5.807578] adv_vreg: Failed to request enable GPIO1277: -19 [ 5.815830] reg-fixed-voltage soc:adv_vreg: Failed to register regulator: -19 [ 5.824106] minidump-id not found for adsp [ 5.829287] minidump-id not found for wcnss [ 5.832801] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped. [ 5.837252] minidump-id not found for modem [ 5.845063] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped. [ 5.848841] pil-q6v5-mss 4080000.qcom,mss: for md_modem segments only will be dumped. [ 5.859940] sps:BAM 0x0000000007104000 is registered.[ 5.864761] msm-dwc3 7000000.ssusb: Could not get usb power_supply [ 5.870438] CHRDEV "byte-cntr" major number 226 goes below the dynamic allocation range [ 5.875488] sps:BAM 0x0000000006044000 is registered.[ 5.878937] msm-dwc3 7000000.ssusb: DWC3 exited from low power mode [ 5.879672] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 5.879746] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 5.880070] xhci-hcd xhci-hcd.0.auto: hcc params 0x0230f665 hci version 0x100 quirks 0x02010010 [ 5.880084] xhci-hcd xhci-hcd.0.auto: irq 374, io mem 0x07000000 [ 5.880221] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.880224] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.880226] usb usb1: Product: xHCI Host Controller [ 5.880228] usb usb1: Manufacturer: Linux 4.9.112-perf xhci-hcd [ 5.880230] usb usb1: SerialNumber: xhci-hcd.0.auto [ 5.880465] hub 1-0:1.0: USB hub found [ 5.880489] hub 1-0:1.0: 1 port detected [ 5.880655] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 5.880710] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 5.880769] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.880858] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 5.880861] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.880864] usb usb2: Product: xHCI Host Controller [ 5.880866] usb usb2: Manufacturer: Linux 4.9.112-perf xhci-hcd [ 5.880868] usb usb2: SerialNumber: xhci-hcd.0.auto [ 5.881061] hub 2-0:1.0: USB hub found [ 5.881080] hub 2-0:1.0: 1 port detected [ 6.014574] CHRDEV "6002000.stm" major number 225 goes below the dynamic allocation range [ 6.019069] coresight-stm 6002000.stm: STM32 initialized [ 6.026810] Registered cp15_barrier emulation handler [ 6.031478] Registered setend emulation handler [ 6.036585] registered taskstats version 1 [ 6.042182] qcom,cc-debug-8953 1874000.qcom,cc-debug: Registered Debug Mux successfully [ 6.048011] msm_smem 86300000.qcom,smem: for smem segments only will be dumped. [ 6.054733] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb to group 12 [ 6.061040] CHRDEV "adsprpc-smd" major number 224 goes below the dynamic allocation range [ 6.070124] input: soc:gpio_keys as /devices/platform/soc/soc:gpio_keys/input/input2 [ 6.077183] qcom,qpnp-rtc 200f000.qcom,spmi:qcom,pm8953@0:qcom,pm8953_rtc: setting system clock to 1970-01-01 00:00:10 UTC (10) [ 6.086524] lpm_levels_of: idx 1 276 [ 6.095979] lpm_levels_of: Residency < 0 for LPM [ 6.099855] lpm_levels_of: idx 1 286 [ 6.104419] lpm_levels_of: Residency < 0 for LPM [ 6.108077] lpm_levels: register_cluster_lpm_stats() [ 6.112673] lpm_levels: register_cluster_lpm_stats() [ 6.120610] rmnet_ipa started initialization [ 6.122422] IPA SSR support = True [ 6.126672] IPA ipa-loaduC = True [ 6.129883] IPA SG support = True [ 6.133361] IPA Napi Enable = False [ 6.136569] using default for wan-rx-desc-size = 1024 [ 6.141301] CHRDEV "wwan_ioctl" major number 223 goes below the dynamic allocation range [ 6.145660] ipa ipa_sps_irq_control_all:963 EP (5) not allocated. [ 6.153279] ipa ipa2_uc_state_check:302 uC is not loaded [ 6.160204] rmnet_ipa completed initialization [ 6.164848] RNDIS_IPA module is loaded.[ 6.168870] clock_late_init: Removing enables held for handed-off clocks [ 6.177527] apc_mem_acc_corner: disabling [ 6.179375] gfx_mem_acc_corner: disabling [ 6.183320] ALSA device list: [ 6.187271] No soundcar[ 6.194767] Freeing unused kernel memory: 4096K ^@[ 6.210190] init: init first stage started! [ 6.210229] init: First stage mount skipped (recovery mode) [ 6.213399] init: Using Android DT directory /proc/device-tree/firmware/android/ [ 6.240171] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 6.240265] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 6.254710] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 6.270290] i2c 2-002d: I2C retry times: 3 [ 6.275525] init: [libfs_mgr]Returning avb_handle with status: 0 [ 6.275735] init: Loading SELinux policy [ 6.296372] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 6.300154] TP0:I2C3: and TP1:i2c2 all no find chip! [ 6.330328] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101 [ 6.330356] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.336090] usb 1-1: Product: USB 2.0 Hub [ 6.361011] hub 1-1:1.0: USB hub found [ 6.361078] hub 1-1:1.0: 4 ports detected [ 6.394309] audit: type=1403 audit(10.809:2): policy loaded auid=4294967295 ses=4294967295 [ 6.394571] selinux: SELinux: Loaded policy from /sepolicy [ 6.394571] [ 6.401621] init: global_bootmode [ 6.412874] selinux: SELinux: Loaded file_contexts [ 6.412874] [ 6.416026] init: init second stage started! [ 6.441248] init: Using Android DT directory /proc/device-tree/firmware/android/ [ 6.446473] selinux: SELinux: Loaded file_contexts [ 6.446473] [ 6.447721] init: Running restorecon... [ 6.469304] init: waitid failed: No child processes [ 6.469397] init: Couldn't load property file '/system/etc/prop.default': open() failed: No such file or directory: No such file or directory [ 6.474204] init: Unable to set property 'ro.adb.secure' to '1' in property file '/prop.default': Read-only property was already set [ 6.488571] init: Unable to set property 'ro.cutoff_voltage_mv' to '3400' in property file '/prop.default': Read-only property was already set [ 6.498065] init: Unable to set property 'ro.product.first_api_level' to '28' in property file '/prop.default': Read-only property was already set [ 6.511577] init: Unable to set property 'ro.af.client_heap_size_kbyte' to '7168' in property file '/prop.default': Read-only property was already set [ 6.527609] audit: type=1400 audit(10.939:3): avc: denied { create } for pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1 [ 6.530802] ueventd: ueventd started! [ 6.535223] selinux: SELinux: Loaded file_contexts [ 6.535223] [ 6.535424] ueventd: Parsing file /ueventd.rc... [ 6.535947] ueventd: Parsing file /vendor/ueventd.rc... [ 6.535972] ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory [ 6.535987] ueventd: Parsing file /odm/ueventd.rc... [ 6.536004] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory [ 6.536017] ueventd: Parsing file /ueventd.qcom.rc... [ 6.536033] ueventd: Unable to read config file '/ueventd.qcom.rc': open() failed: No such file or directory [ 6.603348] audit: type=1400 audit(11.019:4): avc: denied { write } for pid=1 comm="init" path="/acct/uid_0/pid_365/cgroup.procs" dev="rootfs" ino=6857 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1 [ 7.040819] IC works normally, Write 0x8040 0xAA [ 7.383534] i2c-msm-v2 78b6000.i2c: error timeout on polling for valid state. check core_clk [ 7.383618] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 7.391114] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 7.406476] i2c 2-002d: I2C retry times: 3 [ 7.422204] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x051363c8 OPER:0x00000010 [ 7.426228] TP0:I2C3: and TP1:i2c2 all no find chip! [ 7.924227] msm-dwc3 7000000.ssusb: DWC3 in low power mode [ 7.999896] ueventd: Coldboot took 1.463 seconds [ 8.007673] audit: type=1400 audit(12.419:5): avc: denied { setattr } for pid=1 comm="init" name="system" dev="rootfs" ino=14573 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1 [ 8.015402] file system registered [ 8.031024] audit: type=1400 audit(12.449:6): avc: denied { add_name } for pid=1 comm="init" name="enable" scontext=u:r:init:s0 tcontext=u:object_r:sysfs_android_usb:s0 tclass=dir permissive=1 [ 8.031291] audit: type=1400 audit(12.449:7): avc: denied { create } for pid=1 comm="init" name="enable" scontext=u:r:init:s0 tcontext=u:object_r:sysfs_android_usb:s0 tclass=file permissive=1 [ 8.057023] audit: type=1400 audit(12.469:8): avc: denied { read } for pid=374 comm="charger" name="type" dev="sysfs" ino=34697 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=1 [ 8.061190] audit: type=1400 audit(12.479:9): avc: denied { append } for pid=377 comm="recovery" name="ttyHSL0" dev="tmpfs" ino=3492 scontext=u:r:recovery:s0 tcontext=u:object_r:console_device:s0 tclass=chr_file permissive=1 [ 8.061221] audit: type=1400 audit(12.479:10): avc: denied { open } for pid=377 comm="recovery" path="/dev/ttyHSL0" dev="tmpfs" ino=3492 scontext=u:r:recovery:s0 tcontext=u:object_r:console_device:s0 tclass=chr_file permissive=1 [ 8.062634] audit: type=1400 audit(12.479:11): avc: denied { setcurrent } for pid=376 comm="adbd" scontext=u:r:adbd:s0 tcontext=u:r:adbd:s0 tclass=process permissive=1 [ 8.066548] read descriptors [ 0.003708] Starting recovery (pid 375) on Thu Jan 1 00:00:1[ 8.066637] read strings 2 1970 [ 0.063911] recovery filesystem table [ 0.063947] ========================= [ 0.063959] 0 /vendor ext4 /dev/block/platform/soc/7824900.sdhci/by-name/vendor_b 0 [ 0.063969] 1 / ext4 /dev/block/bootdevice/by-name/system_b 0 [ 0.063978] 2 / ext4 /dev/block/bootdevice/by-name/vendor_b 0 [ 0.063986] 3 /data ext4 /dev/block/bootdevice/by-name/userdata -16384 [ 0.063994] 4 /sdcard vfat /dev/block/mmcblk1p1 [ 8.148801] healthd: No battery devices found [ 8.149161] healthd: battery l=80 v=4000 t=25.0 h=2 st=3 chg= [ 8.184767] [goodix_ts_suspend] enter donothing [ 8.184767] 0 [ 0.090247] 5 /boot emmc /dev/block/bootdevice/by-name/b[ 8.201181] [mdss_dsi_request_gpios] gpio_request disp_rst_n suc [ 8.202688] mdss_dsi_pinctrl_gpio_init: mdss_dsi_pinctrl_gpio_init: failed to get pinctrl [ 8.203177] [goodix_ts_resume] enter oot 0 [ 0.090283] 6 /misc emmc /dev/block/bootdevice/by-name/misc 0 [ 0.090292] 7 /tmp ramdisk ramdisk 0 [ 0.090300] [ 0.090323] I:Boot command: boot-recovery [ 0.090332] I:Got 4 arguments from boot message [ 0.090340] locale is [en_US] [ 0.090348] stage is [] [ 0.090356] reason is [RescueParty] [ 0.090364] I:Brightness: 127 (50%) [ 0.090372] cannot find/open a drm device: No such file or directory [ 0.090380] fb0 reports (possibly inaccurate): [ 0.090388] vi.bits_per_pixel = 32 [ 0.090395] vi.red.offset = 0 .length = 8 [ 0.090403] vi.green.offset = 8 .length = 8 [ 0.090411] vi.blue.offset = 16 .length = 8 [ 0.090419] framebuffer: 0 (1280 x 480) [ 0.197403] erasing_text: en_US (91 x 38 @ 1248) [ 0.200258] no_command_text: en_US (166 x 38 @ 1248) [ 0.204132] error_text: en_US (66 x 38 @ 1248) [ 8.481133] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 8.481373] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 8.495810] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 8.511370] i2c 2-002d: I2C retry times: 3 [ 8.527089] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 8.531156] TP0:I2C3: and TP1:i2c2 all no find chip! [ 0.618423] installing_text: en_US (304 x 38 @ 1446) [ 0.647354] SELinux: Loaded file_contexts [ 0.647487] Command: "/sbin/recovery" "--prompt_and_wipe_data" "--reason=RescueParty" "--locale=en_US" [ 0.647516] [ 0.650449] persist.vendor.btstack.enable.splita2dp=false [ 0.[ 8.722705] boot_mode_show:1 650463] persist.vendor.service.bt.hfp.client=true [ 0.650475] persist.vendor.service.bt.a2dp.sink=true [ 0.650484] bluetooth.hfp.client=1 [ 0.650494] ro.boottime.adbd=8057512600 [ 0.650503] ro.boottime.init=6197 [ 0.650513] ro.boottime.init.selinux=132 [ 0.650522] ro.boottime.init.cold_boot_wait=1390 [ 0.650532] ro.boottime.charger=8054259215 [ 0.650541] ro.boottime.ueventd=6527395934 [ 0.650551] ro.boottime.recovery=8055262183 [ 0.650560] ro.vendor.qti.sys.fw.bservice_age=5000 [ 0.650570] ro.vendor.qti.sys.fw.bservice_limit=5 [ 0.650580] ro.vendor.qti.sys.fw.bservice_enable=true [ 0.650589] persist.vendor.cne.feature=1 [ 0.650599] dalvik.vm.dex2oat-minidebuginfo=true [ 0.650608] debug.sf.hw=0 [ 0.650617] debug.sf.recomputecrop=0 [ 0.650627] debug.sf.enable_hwc_vds=1 [ 0.650636] debug.sf.latch_unsignaled=1 [ 0.650645] debug.egl.hw=0 [ 0.650655] debug.atrace.tags.enableflags=0 [ 0.650664] debug.enable.sglscale=1 [ 0.650673] debug.gralloc.enable_fb_ubwc=1 [ 0.650683] debug.mdpcomp.logs=0 [ 0.650692] av.debug.disable.pers.cache=1 [ 0.650701] mm.enable.smoothstreaming=true [ 0.650711] ro.fm.transmitter=false [ 0.650720] ro.ui.style_q=true [ 0.650729] ro.com.google.gmsversion=9_201906 [ 0.650739] ro.opa.eligible_device=true [ 0.650748] ro.boot.emmc=true [ 0.650757] ro.boot.flash.locked=0 [ 0.650767] ro.boot.vbmeta.size=4992 [ 0.650776] ro.boot.vbmeta.digest=cf4f8674d30d74b7e0f1d2cc9b9ebaac10338a250b89a0e2833ef2ea38b0f528 [ 0.650786] ro.boot.vbmeta.hash_alg=sha256 [ 0.650795] ro.boot.vbmeta.device_state=unlocked [ 0.650805] ro.boot.ckxmode=recovery [ 0.650814] ro.boot.dtbo_idx=7 [ 0.650823] ro.boot.usbconfigfs=true [ 0.650833] ro.hwui.path_cache_size=32 [ 0.650842] ro.hwui.layer_cache_size=48 [ 0.650852] ro.hwui.texture_cache_size=72 [ 0.650861] ro.hwui.gradient_cache_size=1 [ 0.650870] ro.hwui.r_buffer_cache_size=8 [ 0.650880] ro.hwui.drop_shadow_cache_size=6 [ 0.650889] ro.hwui.text_large_cache_width=2048 [ 0.650899] ro.hwui.text_small_cache_width=1024 [ 0.650908] ro.hwui.text_large_cache_height=1024 [ 0.650918] ro.hwui.text_small_cache_height=1024 [ 0.650927] ro.hwui.texture_cache_flushrate=0.4 [ 0.650937] ro.wifi.channels= [ 0.650946] ro.allow.mock.location=0 [ 0.650955] ro.build.zhtd.oem=audi [ 0.650964] ro.build.flavor=msm8953_64-user [ 0.650974] ro.build.version.all_codenames=REL [ 0.650983] ro.build.version.min_supported_target_sdk=17 [ 0.650993] ro.build.ab_update=true [ 0.651002] ro.build.characteristics=device [ 0.651011] ro.treble.enabled=true [ 0.651021] ro.memperf.lib=libmemperf.so [ 0.651030] ro.memperf.enable=false [ 0.651039] ro.product.locale=en-US [ 0.651049] ro.release.sys_version=7.5 [ 0.651058] ro.bootfast=true [ 0.651067] ro.location.osnlp.region.package= [ 0.651077] ro.location.osnlp.package=com.google.android.gms [ 0.651086] ro.qualcomm.cabl=2 [ 0.651095] ro.bluetooth.library_name=libbluetooth_qti.so [ 0.651105] ro.emmc_size=16GB [ 0.651114] ro.sdkversion=20190305 [ 0.651123] ro.setupwizard.mode=OPTIONAL [ 0.651133] ro.quec_code_branch=SC600 [ 0.651142] ro.cutoff_voltage_mv=3400 [ 0.651151] ro.quec_code_project=SC60_Android9_R05_r000120 [ 0.651161] ro.actionable_compatible_property.enabled=true [ 0.651170] mmp.enable.3g2=true [ 0.651180] sdm.debug.disable_skip_validate=1 [ 0.651189] init.svc.adbd=running [ 0.651198] init.svc.charger=running [ 0.651208] init.svc.ueventd=running [ 0.65[ 9.045070] IC works normally, Write 0x8040 0xAA 1217] init.svc.recovery=running [ 0.651226] qemu.hw.mainkeys=1 [ 0.651236] rild.libargs=-d /dev/smd0 [ 0.651245] rild.libpath=/vendor/lib64/libril-qc-qmi-1.so [ 0.651254] vidc.enc.dcvs.extra-buff-count=2 [ 0.651264] audio.offload.min.duration.secs=30 [ 0.651273] media.settings.xml=/vendor/etc/media_profiles_vendor.xml [ 0.994379] media.msm8956hw=0 [ 0.994410] media.aac_51_output_enabled=true [ 0.994421] persist.mm.sta.enable=0 [ 0.994431] persist.hwc.mdpcomp.enable=true [ 0.994441] persist.hwc.enable_vds=1 [ 0.994451] persist.qfp=false [ 0.994461] persist.data.netmgrd.qos.enable=true [ 0.994471] persist.demo.hdmirotates=true [ 0.994481] persist.demo.hdmirotationlock=false [ 0.994491] persist.rild.nitz_plmn= [ 0.994500] persist.rild.nitz_long_ons_0= [ 0.994510] persist.rild.nitz_long_ons_1= [ 0.994520] persist.rild.nitz_long_ons_2= [ 0.994530] persist.rild.nitz_long_ons_3= [ 0.994539] persist.rild.nitz_short_ons_0= [ 0.994549] persist.rild.nitz_short_ons_1= [ 0.994558] persist.rild.nitz_short_ons_2= [ 0.994568] persist.rild.nitz_short_ons_3= [ 0.994577] persist.timed.enable=true [ 0.994587] persist.backup.ntpServer=0.pool.ntp.org [ 0.994596] persist.fuse_sdcard=true [ 0.994605] setupwizard.feature.predeferred_enabled=false [ 0.994615] DEVICE_PROVISIONED=1 [ 0.994624] ro.config.ringtone=Ring_Synth_04.ogg [ 0.994634] ro.config.alarm_alert=Alarm_Classic.ogg [ 0.994643] ro.config.notification_sound=pixiedust.ogg [ 0.994653] ro.boot.vbmeta.avb_version=1.0 [ 0.994663] ro.boot.console=ttyHSL0 [ 0.994672] ro.boot.baseband=msm [ 0.994682] ro.boot.hardware=qcom [ 0.994691] ro.boot.keymaster=1 [ 0.994700] ro.boot.bootdevice=7824900.sdhci [ 0.994710] ro.boot.veritymode=enforcing [ 0.994719] ro.boot.avb_version=1.1 [ 0.994729] ro.boot.verifiedbootstate=orange [ 0.994738] ro.build.id=PKQ1.181105.001 [ 0.994748] ro.build.date=Fri Nov 11 13:53:02 CST 2022 [ 0.994757] ro.build.date.utc=1668145982 [ 0.994767] ro.build.host=carocean-PowerEdge-R540 [ 0.994776] ro.build.tags=test-keys [ 0.994786] ro.build.type=user [ 0.994795] ro.build.user=android20 [ 0.994804] ro.build.display.id=PKQ1.181105.001 test-keys [ 0.994814] ro.build.product=msm8953_64 [ 0.994823] ro.build.version.sdk=28 [ 0.994833] ro.build.version.base_os= [ 0.994842] ro.build.version.release=9 [ 0.994868] ro.build.version.codename=REL [ 0.994878] ro.build.version.incremental=eng.android.20221111.135811 [ 0.994888] ro.build.version.preview_sdk=0 [ 0.994897] ro.build.version.security_patch=2022-03-05 [ 0.994907] ro.build.description=msm8953_64-user 9 PKQ1.181105.001 eng.android.20221111.135811 test-keys [ 0.994917] ro.build.system_root_image=true [ 0.994927] ro.product.cpu.abi=arm64-v8a [ 0.994936] ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi [ 0.994946] ro.product.name=msm8953_64 [ 0.994955] ro.product.brand=Android [ 0.994964] ro.product.model=msm8953 for arm64 [ 0.994974] ro.product.device=msm8953_64 [ 0.994983] ro.product.manufacturer=QUALCOMM [ 0.994992] ro.baseband=msm [ 0.995002] ro.bootmode=unknown [ 0.995011] ro.hardware=qcom [ 0.995020] ro.revision=0 [ 0.995030] ro.bootimage.build.date=Fri Nov 11 13:53:02 CST 2022 [ 0.995039] ro.bootimage.build.date.utc=1668145982 [ 0.995049] ro.bootimage.build.fingerprint=Android/msm8953_64/msm8953_64:9/PKQ1.181105.001/android2011111353:user/test-keys [ 0.995059] ro.bootloader=unknown [ 0.995068] ro.debuggable=1 [ 0.995077] ro.property_service.version=2 [ 0.995087] sys.usb.controller=7000000.dwc3 [ 0.995096] persist.sys.dalvik.vm.lib.2=libart.so [ 0.995105] af.fast_track_multiplier=1 [ 0.995115] ro.af.client_heap_size_kbyte=7168 [ 0.995124] ro.com.android.dataroaming=true [ 0.995133] ro.boot.wificountrycode=US [ 0.995143] ro.zygote=zygote64_32 [ 0.995152] ro.opengles.version=196610 [ 0.995161] ro.telephony.default_network=22,20 [ 0.995171] ro.oem_unlock_supported=1 [ 1.327458] drm.service.enabled=true [ 1.327476] audio.offload.video=true [ 1.327488] audio.deep_buffer.media=true [ 1.327500] keyguard.no_require_sim=true [ 1.327512] telephony.lteOnCdmaDevice=1 [ 1.327523] persist.radio.multisim.config=dsds [ 1.327535] ro.dalvik.vm.native.bridge=0 [ 1.327546] dalvik.vm.isa.arm.variant=cortex-a53 [ 1.327558] dalvik.vm.isa.arm.features=default [ 1.327569] dalvik.vm.isa.arm64.variant=generic [ 1.327581] dalvik.vm.isa.arm64.features=default [ 1.327592] dalvik.vm.dexopt.secondary=true [ 1.327603] dalvik.vm.usejit=true [ 1.327615] dalvik.vm.heapsize=512m [ 1.327626] dalvik.vm.dex2oat-Xms=64m [ 1.327638] dalvik.vm.dex2oat-Xmx=512m [ 1.327649] dalvik.vm.heapmaxfree=8m [ 1.327661] dalvik.vm.heapminfree=4m [ 1.327672] dalvik.vm.heapstartsize=16m [ 1.327683] dalvik.vm.appimageformat=lz4 [ 1.327695] dalvik.vm.usejitprofiles=true [ 1.327706] dalvik.vm.heapgrowthlimit=192m [ 1.327717] dalvik.vm.stack-trace-dir=/data/anr [ 1.327729] dalvik.vm.image-dex2oat-Xms=64m [ 1.327740] dalvik.vm.image-dex2oat-Xmx=64m [ 1.327752] dalvik.vm.heaptargetutilization=0.75 [ 1.327763] ro.frp.pst=/dev/block/bootdevice/by-name/config [ 1.327775] ro.boot.slot_suffix=_b [ 1.327786] ro.vndk.version=28 [ 1.327798] ro.board.platform=msm8953 [ 1.327809] ro.vendor.build.date=Fri Nov 11 13:53:02 CST 2022 [ 1.327821] ro.vendor.build.date.utc=1668145982 [ 1.327833] ro.vendor.build.fingerprint=Android/msm8953_64/msm8953_64:9/PKQ1.181105.001/android2011111353:user/test-keys [ 1.327845] ro.carrier=unknown [ 1.327856] ro.product.cpu.abilist32=armeabi-v7a,armeabi [ 1.327868] ro.product.cpu.abilist64=arm64-v8a [ 1.327879] ro.product.board=msm8953 [ 1.327890] ro.product.vendor.name=msm8953_64 [ 1.327902] ro.product.vendor.brand=Android [ 1.327913] ro.product.vendor.model=msm8953 for arm64 [ 1.327925] ro.product.vendor.device=msm8953_64 [ 1.327936] ro.product.vendor.manufacturer=QUALCOMM [ 1.327948] ro.product.first_api_level=28 [ 1.327959] ro.hardware.nfc_nci=nqx.defaul[ 9.600995] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 9.605345] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 9.621003] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 9.636536] i2c 2-002d: I2C retry times: 3 [ 9.652303] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 9.656316] TP0:I2C3: and TP1:i2c2 all no find chip! t [ 1.327970] ro.hardware.keystore_desede=true [ 1.327982] ro.build.fingerprint=Android/msm8953_64/msm8953_64:9/PKQ1.181105.001/android2011111353:user/test-keys [ 1.327994] pm.dexopt.boot=verify [ 1.328006] pm.dexopt.ab-ota=speed-profile [ 1.328017] pm.dexopt.shared=speed [ 1.328028] pm.dexopt.install=speed-profile [ 1.328040] pm.dexopt.inactive=verify [ 1.328051] pm.dexopt.bg-dexopt=speed-profile [ 1.328062] pm.dexopt.first-boot=quicken [ 1.328074] ro.adb.secure=1 [ 1.328085] ro.secure=0 [ 1.328096] sys.usb.configfs=1 [ 1.328108] sys.usb.ffs.ready=1 [ 1.328119] vendor.hw.fm.init=0 [ 1.328130] log.tag.stats_log=I [ 1.328142] ro.logd.size.stats=64K [ 1.328153] vendor.mm.enable.qcom_parser=1048575 [ 1.328164] vendor.video.disable.ubwc=1 [ 1.328176] persist.debug.wfd.enable=1 [ 1.328187] persist.debug.coresight.config=stm-events [ 1.328199] ro.boot.pmi632exist=false [ 1.328210] ro.build.quectelversion.release=01.001V01 [ 1.328222] ril.subscription.types=NV,RUIM [ 1.328233] ro.vendor.qti.am.reschedule_service=true [ 1.328244] ro.boot.serialno=fbcfe425 [ 1.328256] ro.serialno=fbcfe425 [ 1.328267] security.perf_harden=1 [ 1.328278] dev.pm.dyn_samplingrate=1 [ 1.328290] net.bt.name=Android [ 1.328301] sys.vendor.shutdown.waittime=500 [ 1.328312] persist.sys.usb.config=diag,serial_cdev,rmnet,adb [ 1.328324] ro.vendor.qti.sys.fw.empty_app_percent=50 [ 1.328335] ro.vendor.qti.sys.fw.use_trim_settings=true [ 1.328347] ro.vendor.qti.sys.fw.trim_cache_percent=100 [ 1.328358] ro.vendor.qti.sys.fw.trim_empty_percent=100 [ 1.732465] ro.vendor.qti.sys.fw.trim_enable_memory=2147483648 [ 1.732476] ro.vendor.audio.sdk.ssr=false [ 1.732487] ro.vendor.audio.sdk.fluencetype=none [ 1.732496] vendor.audio.hw.aac.encoder=true [ 1.732506] vendor.audio.pp.asphere.enabled=false [ 1.732515] vendor.audio.use.sw.ape.decoder=true [ 1.732525] vendor.audio.use.sw.alac.decoder=true [ 1.732534] vendor.audio.flac.sw.decoder.24bit=true [ 1.732544] vendor.audio.safx.pbe.enabled=true [ 1.732553] vendor.audio.dolby.ds2.enabled=false [ 1.732573] vendor.audio.dolby.ds2.hardbypass=false [ 1.732583] vendor.audio.parser.ip.buffer.size=262144 [ 1.732593] vendor.audio.tunnel.encode=false [ 1.732602] vendor.audio.offload.track.enable=true [ 1.732612] vendor.audio.offload.buffer.size.kb=64 [ 1.732621] vendor.audio.offload.gapless.enabled=true [ 1.732631] vendor.audio.offload.multiaac.enable=true [ 1.732640] vendor.audio.offload.multiple.enabled=false [ 1.732650] vendor.audio.offload.passthrough=false [ 1.732659] vendor.audio.playback.mch.downsample=true [ 1.732669] vendor.voice.conc.fallbackpath=deep-buffer [ 1.732678] vendor.voice.path.for.pcm.voip=true [ 1.732687] vendor.voice.voip.conc.disabled=true [ 1.732697] vendor.voice.record.conc.disabled=false [ 1.732706] vendor.voice.playback.conc.disabled=true [ 1.732716] persist.vendor.audio.hw.binder.size_kbyte=1024 [ 1.732725] persist.vendor.audio.fluence.speaker=true [ 1.732735] persist.vendor.audio.fluence.voicerec=false [ 1.732744] persist.vendor.audio.fluence.voicecall=true [ 1.732754] persist.vendor.audio.speaker.prot.enable=false [ 1.732763] vendor.camera.aux.packagelist=org.codeaurora.snapcam,com.android.dialer,com.android.phone [ 1.732773] ro.vendor.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi [ 1.732783] ro.vendor.product.cpu.abilist32=armeabi-v7a,armeabi [ 1.732792] ro.vendor.product.cpu.abilist64=arm64-v8a [ 1.732801] ro.vendor.gt_library=libqti-gt.so [ 1.732811] ro.vendor.use_data_netmgrd=true [ 1.732820] ro.vendor.extension_library=libqti-perfd-client.so [ 1.732830] vendor.vidc.dec.downscalar_width=1920 [ 1.732839] vendor.vidc.dec.downscalar_height=1088 [ 1.732849] vendor.vidc.enc.disable.pq=true [ 1.732858] vendor.vidc.enc.disable_bframes=1 [ 1.732867] vendor.vidc.disable.split.mode=1 [ 1.732876] vendor.debug.enable.gamed=0 [ 1.732886] vendor.camera.hal1.packagelist=com.skype.raider,com.google.android.talk [ 1.732895] vendor.camera.lowpower.record.enable=1 [ 1.732905] vendor.audio_hal.period_size=192 [ 1.732914] persist.vendor.ntp.svr_2=cn.ntp.org.cn [ 1.732924] persist.vendor.data.mode=concurrent [ 1.732933] persist.vendor.camera.display.lmax=1280x720 [ 1.732942] persist.vendor.camera.display.umax=1920x1080 [ 1.732952] persist.vendor.qcomsysd.enabled=1 [ 1.732961] persist.vendor.bluetooth.modem_nv_support=true [ 1.732971] ro.vendor.display.cabl=2 [ 1.732980] vendor.display.disable_skip_validate=1 [ 1.732989] vendor.display.enable_default_color_mode=1 [ 1.732999] vendor.gralloc.enable_fb_ubwc=1 [ 1.733008] ro.vendor.qti.core_ctl_max_cpu=4 [ 1.733018] ro.vendor.qti.core_ctl_min_cpu=2 [ 1.733027] ro.vendor.at_library=libqti-at.so [ 1.733036] persist.vendor.radio.rat_on=combine [ 1.733045] persist.vendor.radio.custom_ecc=1 [ 1.733055] persist.vendor.radio.sib16_support=1 [ 1.733064] persist.vendor.radio.apm_sim_not_pwdn=1 [ 1.733074] vendor.rild.libpath=/vendor/lib64/libril-qc-qmi-1.so [ 1.733083] ro.vendor.build.security_patch=2018-06-05 [ 1.733093] [ 1.733101] Supported API: 3 [ 1.733110] /sys/ext_attr/boot_mode : recovery [ 10.721007] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 10.721238] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 10.735675] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 10.751252] i2c 2-002d: I2C retry times: 3 [ 10.766956] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 10.771034] TP0:I2C3: and TP1:i2c2 all no find chip! [ 11.121621] IC works normally, Write 0x8040 0xAA [ 11.840999] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 11.841232] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 11.855668] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 11.871236] i2c 2-002d: I2C retry times: 3 [ 11.886954] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 11.891026] TP0:I2C3: and TP1:i2c2 all no find chip! [ 12.960997] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 12.961227] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 12.975662] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 12.991248] i2c 2-002d: I2C retry times: 3 [ 13.006935] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 13.011025] TP0:I2C3: and TP1:i2c2 all no find chip! [ 13.120794] IC works normally, Write 0x8040 0xAA [ 14.080979] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 14.081209] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 14.095657] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 14.111203] i2c 2-002d: I2C retry times: 3 [ 14.126942] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 14.131004] TP0:I2C3: and TP1:i2c2 all no find chip! [ 15.121620] IC works normally, Write 0x8040 0xAA [ 15.200193] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 15.200424] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 15.214862] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 15.230441] i2c 2-002d: I2C retry times: 3 [ 15.246130] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 15.250216] TP0:I2C3: and TP1:i2c2 all no find chip! Android Bootloader - UART_DM Initialized!!! [40] SPMI read command failure: cmd_id = 1, error = 2 [40] SPMI read command failure: cmd_id = 1, error = 2 [40] SPMI read command failure: cmd_id = 1, error = 2 [50] SPMI read command failure: cmd_id = 1, error = 2 [50] SPMI read command failure: cmd_id = 1, error = 2 [60] SPMI read command failure: cmd_id = 1, error = 2 [60] SPMI read command failure: cmd_id = 1, error = 2 [70] SPMI read command failure: cmd_id = 1, error = 2 [70] SPMI read command failure: cmd_id = 1, error = 2 [80] SPMI read command failure: cmd_id = 1, error = 2 [80] SPMI read command failure: cmd_id = 1, error = 2 [90] SPMI read command failure: cmd_id = 1, error = 2 [90] SPMI read command failure: cmd_id = 1, error = 2 [100] SPMI read command failure: cmd_id = 1, error = 2 [110] SPMI read command failure: cmd_id = 1, error = 2 [110] SPMI read command failure: cmd_id = 1, error = 2 [120] SPMI read command failure: cmd_id = 1, error = 2 [120] Qseecom Init Done in Appsbl version is 0x1001000 [130] secure app region addr=0x85b00000 size=0x800000[130] TZ App region notif returned with status:0 addr:85b00000 size:8388608 [140] TZ App log region register returned with status:0 addr:8f17f000 size:4096 [140] Qseecom TZ Init Done in Appsbl [160] Loading cmnlib done [170] Loading cmnlib64 done [190] <8>keymaster64: KEYMASTER Init [200] ERROR: Splash image header invalid [200] Not able to search the panel [210] [oem_panel_select] hw_id:0x8 [210] [oem_panel_select] platform_subtype:0x0 [210] [oem_panel_select] panel_id:0x1 [220] [LK_sn65dsi83_i2c_init] panel [220] [mipi2lvds_chip_reset] enter [320] [mipi2lvds_chip_reset] leave [320] richard: sn65dsi83 in I2C TP1 [330] QUP: I2C status flags :0x1121c4 [330] qup_i2c_xfer error -5 [330] QUP: I2C status flags :0x1121c4 [340] qup_i2c_xfer error -5 [340] QUP: I2C status flags :0x1121c4 [340] qup_i2c_xfer error -5 [340] [is_sn65dsi83] icn6202 [350] QUP: I2C status flags :0x1121c4 [350] qup_i2c_xfer error -5 [350] ----sn65dsi83_write_byte faile ont time return!----- [360] [LK_Mcu_Init] start 20220823 [370] SPMI read command failure: cmd_id = 1, error = 2 [370] SPMI read command failure: cmd_id = 1, error = 2 [380] [LK_Mcu_Init] 0x02 0x91,0x04,0x01,0x63,0xf7 [1380] [init_panel_data] panel_id:0x1 [1390] SPMI read command failure: cmd_id = 1, error = 2 [1400] SPMI read command failure: cmd_id = 1, error = 2 [1400] SPMI read command failure: cmd_id = 1, error = 2 [1410] SPMI read command failure: cmd_id = 1, error = 2 [1410] SPMI read command failure: cmd_id = 1, error = 2 [1420] SPMI read command failure: cmd_id = 1, error = 2 [1420] SPMI read command failure: cmd_id = 1, error = 2 [1430] SPMI read command failure: cmd_id = 1, error = 2 [1430] SPMI read command failure: cmd_id = 1, error = 2 [1440] SPMI read command failure: cmd_id = 1, error = 2 [1440] SPMI read command failure: cmd_id = 1, error = 2 [1450] SPMI read command failure: cmd_id = 1, error = 2 [1450] SPMI read command failure: cmd_id = 1, error = 2 [1460] SPMI read command failure: cmd_id = 1, error = 2 [1460] SPMI read command failure: cmd_id = 1, error = 2 [1470] SPMI read command failure: cmd_id = 1, error = 2 [1470] SPMI read command failure: cmd_id = 1, error = 2 [1480] SPMI read command failure: cmd_id = 1, error = 2 [1490] SPMI read command failure: cmd_id = 1, error = 2 [1490] SPMI read command failure: cmd_id = 1, error = 2 [1500] SPMI read command failure: cmd_id = 1, error = 2 [1500] SPMI read command failure: cmd_id = 1, error = 2 [1510] SPMI read command failure: cmd_id = 1, error = 2 [1510] SPMI read command failure: cmd_id = 1, error = 2 [1520] SPMI read command failure: cmd_id = 1, error = 2 [1520] SPMI read command failure: cmd_id = 1, error = 2 [1530] SPMI read command failure: cmd_id = 1, error = 2 [1530] SPMI read command failure: cmd_id = 1, error = 2 [1540] SPMI read command failure: cmd_id = 1, error = 2 [1540] SPMI read command failure: cmd_id = 1, error = 2 [1550] SPMI read command failure: cmd_id = 1, error = 2 [1550] SPMI read command failure: cmd_id = 1, error = 2 [1560] SPMI read command failure: cmd_id = 1, error = 2 [1560] SPMI read command failure: cmd_id = 1, error = 2 [1570] SPMI read command failure: cmd_id = 1, error = 2 [1570] SPMI read command failure: cmd_id = 1, error = 2 [1580] SPMI read command failure: cmd_id = 1, error = 2 [1580] SPMI read command failure: cmd_id = 1, error = 2 [1590] SPMI read command failure: cmd_id = 1, error = 2 [1650] ERROR: Splash image header invalid [2090] MultiSlot true, partition name boot_b [2090] AVB version 2 [2100] avb_slot_verify.c[2100] :[2100] 417[2100] : DEBUG: [2100] Loading vbmeta struct from partition '[2110] vbmeta_b[2110] '. [2120] ValidateVbmetaPublicKey PublicKeyLength 1032, PublicKeyMetadataLength 0 [2120] ValidateVbmetaPublicKey OutIsTrusted 1, UserKey 0 [2130] ReadRollbackIndex Location 0, RollbackIndex 0 [2130] avb_slot_verify.c[2140] :[2140] 417[2140] : DEBUG: [2140] Loading vbmeta struct from partition '[2140] system_b[2140] '. [2150] negative Offset (-64) converted to (0xafffffc0) [2150] read from system_b, 0x40 bytes at Offset 0xafffffc0, partition size 3713138688 [2160] StartBlock 0x57ffff, ReadOffset 0x1c0, read_size 0x40 [2160] read from system_b, 0x740 bytes at Offset 0xaff67000, partition size 3713138688 [2170] LastBlock 0x57fb3b, ReadOffset 0x0, read_size 0x140 [2180] ReadRollbackIndex Location 2, RollbackIndex 0 [2180] avb_slot_verify.c[2180] :[2190] 157[2190] : DEBUG: [2190] boot_b[2190] : Loading entire partition. [2340] avb_slot_verify.c[2340] :[2340] 236[2340] : DEBUG: [2340] boot_b[2340] : success: Image verification completed. [2350] avb_slot_verify.c[2350] :[2350] 157[2350] : DEBUG: [2350] dtbo_b[2350] : Loading entire partition. [2360] avb_slot_verify.c[2360] :[2370] 236[2370] : DEBUG: [2370] dtbo_b[2370] : success: Image verification completed. [2370] system_b uuid: ba578583-2acb-61e5-e41c-538c238ecbbb [2380] boot_b uuid: 66155ccf-0dc8-9ca7-1354-d24c9345f4ef [2380] vbmeta_b uuid: 888c9b60-9404-c58f-6c2d-3f6cec8a56c8 [2390] State: Unlocked, AvbSlotVerify returned OK, continue boot [2390] Requested Partition: boot [2400] Loaded Partition: boot [2400] Requested Partition: dtbo [2400] Loaded Partition: boot [2410] Loaded Partition: dtbo [2410] Total loaded partition 3 [2410] Device is unlocked! Skipping verification... [2420] <8>keymaster64: cmd_id=SET_ROT begin [2420] <8>keymaster64: Error: qsee_cfg_getpropval in get_enable_set_bandwidth failed for enable_set_bandwidth, ret_size = 0 [2430] <8>keymaster64: rot.data_length: 32 [2430] <8>keymaster64: cmd_id=SET_ROT done with ret: 0 time taken: 0 [2440] <8>keymaster64: cmd_id=GET_VERSION begin [2450] Authentication Key not yet programmed [2450] <8>keymaster64: qsee_stor_device_init error ret: -14 [2460] <8>keymaster64: cmd_id=GET_VERSION done with ret: 0 time taken: 13 [2460] <8>keymaster64: cmd_id=SET_BOOT_STATE begin [2470] <8>keymaster64: is_unlocked: 1 [2470] <8>keymaster64: color: 1 [2470] <8>keymaster64: system_version: 90000 [2480] <8>keymaster64: system_security_level 202203 [2480] <8>keymaster64: cmd_id=SET_BOOT_STATE done with ret: 0 time taken: 0 [2490] Sending Root of Trust to trustzone: end [2490] <8>keymaster64: cmd_id=KEYMASTER_SET_VBH begin [2500] <8>keymaster64: cmd_id=KEYMASTER_SET_VBH done with ret: 0 time taken: 0 [2510] VB2: boot state: orange(1) [2510] Boot State is : 1 [2510] quick boot Device will not DISPLAY_MENU_ORANGE [3190] update_cmdline: 0,1 [3190] UpdateCmdLine vbcmdline present len 838 [3200] SPMI read command failure: cmd_id = 1, error = 2 [3200] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci firmware_class.path=/vendor/firmware_mnt/image androidboot.usbco[3470] kaslr-Seed is added to chosen node [3530] <8>keymaster64: cmd_id=MILESTONE_CALL begin [3530] <8>keymaster64: cmd_id=MILESTONE_CALL done with ret: 0 time taken: 0 [3540] Success [3540] Qseecom De-Init Done in Appsbl [3550] free_verified_boot_resource [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.112-perf (android20@carocean-PowerEdge-R540) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #10 SMP PREEMPT Fri Nov 11 14:44:56 CST 2022 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] Machine: Qualcomm Technologies, Inc. SDM450 NOPMI MTP [ 0.000000] core_ctl: disable_cpumask=0-7 [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ffc00000, size 4 MiB [ 0.000000] OF: reserved mem: initialized node adsp_region@0, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f800000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node gpu_region@0, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f000000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node venus_region@0, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: invalid size property in 'mem_dump_region' node. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f4800000, size 180 MiB [ 0.000000] OF: reserved mem: initialized node secure_region@0, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f3800000, size 16 MiB [ 0.000000] OF: reserved mem: initialized node qseecom_region@0, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f3400000, size 4 MiB [ 0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000085b00000, size 13 MiB [ 0.000000] OF: reserved mem: initialized node other_ext_region@0, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000086c00000, size 106 MiB [ 0.000000] OF: reserved mem: initialized node modem_region@0, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x000000008d600000, size 17 MiB [ 0.000000] OF: reserved mem: initialized node adsp_fw_region@0, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x000000008e700000, size 7 MiB [ 0.000000] OF: reserved mem: initialized node wcnss_fw_region@0, compatible id removed-dma-pool [ 0.000000] cma: Reserved 16 MiB at 0x00000000f2400000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] Did not receive the expected number of bytes from PRNG: 0 [ 0.000000] percpu: Embedded 23 pages/cpu @fffffffcf2145000 s55192 r8192 d30824 u94208 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 931072 [ 0.000000] lvds1280x480 [ 0.000000] lcm_set_parasize 1 [ 0.000000] Kernel command line: core_ctl_disable_cpumask=0-7 kpti=0 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci firmware_class.path=/vendor/firmware_mnt/image androidboot.usbconfigfs=true loop.max_part=7 buildvariant=user androidboot.emmc=true androidboot.verifiedbootstate=orange androidboot.keymaster=1 dm="1 vroot none ro 1,0 5676008 verity 1 PARTUUID=ba578583-2acb-61e5-e41c-538c238ecbbb PARTUUID=ba578583-2acb-61e5-e41c-538c238ecbbb 4096 4096 709501 709501 sha1 74666a10a749a123d0114af12619f4fe534a7f18 7447bc586d8e3c06b0a923398f0e60f4240e6021875ca3824732fd83d23b95d2 10 restart_on_corruption ignore_zero_blocks use_fec_from_device PARTUUID=ba578583-2acb-61e5-e41c-538c238ecbbb fec_roots 2 fec_blocks 715089 fec_start 715089" root=/dev/dm-0 androidboot.vbmeta.device=PARTUUID=888c9b60-9404-c58f-6c2d-3f6cec8a56c8 androidboot.vbmeta.avb_version=1.0 androidbo [ 0.000000] device-mapper: init: will configure 1 devices [ 0.000000] ckx_touch_boot_mode 1! recovery [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 917504 bytes [ 0.000000] log_buf_len min size: 131072 bytes [ 0.000000] log_buf_len: 1048576 bytes [ 0.000000] early log buf free: 126184(96%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3410460K/3785728K available (15868K kernel code, 1604K rwdata, 6568K rodata, 4096K init, 1141K bss, 133604K reserved, 241664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff81efe80000 - 0xffffff81f0e00000 ( 15872 KB) [ 0.000000] .rodata : 0xffffff81f0e00000 - 0xffffff81f1600000 ( 8192 KB) [ 0.000000] .init : 0xffffff81f1600000 - 0xffffff81f1a00000 ( 4096 KB) [ 0.000000] .data : 0xffffff81f1a00000 - 0xffffff81f1b91200 ( 1605 KB) [ 0.000000] .bss : 0xffffff81f1b91200 - 0xffffff81f1cae784 ( 1142 KB) [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbff0400000 - 0xffffffbff4000000 ( 60 MB actual) [ 0.000000] memory : 0xfffffffc10000000 - 0xfffffffd00000000 ( 3840 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] [ 0.000000] ********************************************************** [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000] ** ** [ 0.000000] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000] ** ** [ 0.000000] ** This means that this is a DEBUG kernel and it is ** [ 0.000000] ** unsafe for production use. ** [ 0.000000] ** ** [ 0.000000] ** If you see this message and you are not debugging ** [ 0.000000] ** the kernel, report this immediately to your vendor! ** [ 0.000000] ** ** [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000] ********************************************************** [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000021] clocksource: Switched to clocksource arch_sys_counter [ 0.001112] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.001126] pid_max: default: 32768 minimum: 301 [ 0.001208] Security Framework initialized [ 0.001217] SELinux: Initializing. [ 0.001313] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001322] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002523] /cpus/cpu@0: Missing clock-frequency property [ 0.002536] /cpus/cpu@1: Missing clock-frequency property [ 0.002548] /cpus/cpu@2: Missing clock-frequency property [ 0.002559] /cpus/cpu@3: Missing clock-frequency property [ 0.002572] /cpus/cpu@100: Missing clock-frequency property [ 0.002586] /cpus/cpu@101: Missing clock-frequency property [ 0.002601] /cpus/cpu@102: Missing clock-frequency property [ 0.002616] /cpus/cpu@103: Missing clock-frequency property [ 0.002724] sched-energy: Sched-energy-costs installed from DT [ 0.002740] ASID allocator initialised with 32768 entries [ 0.018706] cpu_clock_pwr_init: Power clocks configured [ 0.021764] MSM Memory Dump base table set up [ 0.021794] MSM Memory Dump apps data table set up [ 0.021951] EFI services will not be available. [ 0.030923] CPU1: Booted secondary processor [410fd034] [ 0.039607] CPU2: Booted secondary processor [410fd034] [ 0.048248] CPU3: Booted secondary processor [410fd034] [ 0.057008] CPU4: Booted secondary processor [410fd034] [ 0.065704] CPU5: Booted secondary processor [410fd034] [ 0.074389] CPU6: Booted secondary processor [410fd034] [ 0.083130] CPU7: Booted secondary processor [410fd034] [ 0.083408] Brought up 8 CPUs [ 0.083440] SMP: Total of 8 processors activated. [ 0.083449] CPU features: detected feature: 32-bit EL0 Support [ 0.083457] CPU features: kernel page table isolation forced OFF by command line option [ 0.083468] CPU: All CPU(s) started at EL1 [ 0.083546] alternatives: patching kernel code [ 0.083773] CPU7: update max cpu_capacity 1024 [ 0.090051] CPU7: update max cpu_capacity 1024 [ 0.148748] DMI not present or invalid. [ 0.149303] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.149324] futex hash table entries: 2048 (order: 6, 262144 bytes) [ 0.159613] pinctrl core: initialized pinctrl subsystem [ 0.160543] NET: Registered protocol family 16 [ 0.163058] schedtune: init normalization constants... [ 0.163071] schedtune: CLUSTER[0-3] min_pwr: 1 max_pwr: 180 [ 0.163079] schedtune: CPU[0] min_pwr: 1 max_pwr: 65 [ 0.163086] schedtune: CPU[1] min_pwr: 1 max_pwr: 65 [ 0.163093] schedtune: CPU[2] min_pwr: 1 max_pwr: 65 [ 0.163101] schedtune: CPU[3] min_pwr: 1 max_pwr: 65 [ 0.163108] schedtune: CLUSTER[4-7] min_pwr: 1 max_pwr: 175 [ 0.163116] schedtune: CPU[4] min_pwr: 1 max_pwr: 65 [ 0.163123] schedtune: CPU[5] min_pwr: 1 max_pwr: 65 [ 0.163130] schedtune: CPU[6] min_pwr: 1 max_pwr: 65 [ 0.163137] schedtune: CPU[7] min_pwr: 1 max_pwr: 65 [ 0.163144] schedtune: SYSTEM min_pwr: 10 max_pwr: 875 [ 0.163152] schedtune: using normalization constants mul: 789479538 sh1: 1 sh2: 9 [ 0.163156] schedtune: verify normalization constants... [ 0.163162] schedtune: max_pwr/2^0: 865 => norm_pwr: 1024 [ 0.163168] schedtune: max_pwr/2^1: 432 => norm_pwr: 511 [ 0.163174] schedtune: max_pwr/2^2: 216 => norm_pwr: 255 [ 0.163180] schedtune: max_pwr/2^3: 108 => norm_pwr: 127 [ 0.163185] schedtune: max_pwr/2^4: 54 => norm_pwr: 63 [ 0.163191] schedtune: max_pwr/2^5: 27 => norm_pwr: 31 [ 0.163197] schedtune: configured to support 5 boost groups [ 0.165059] cpuidle: using governor menu [ 0.166265] cpuidle: using governor qcom [ 0.171642] vdso: 2 pages (1 code @ ffffff81f0e07000, 1 data @ ffffff81f1a04000) [ 0.171664] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.172714] DMA: preallocated 256 KiB pool for atomic allocations [ 0.177913] smd_channel_probe_now: allocation table not initialized [ 0.178732] smd_channel_probe_now: allocation table not initialized [ 0.179213] smd_channel_probe_now: allocation table not initialized [ 0.179926] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches [ 0.180574] pm8953_s1: Bringing 1uV into 16-16uV [ 0.181128] pm8953_s2_level: Bringing 1uV into 16-16uV [ 0.181513] pm8953_s2_floor_level: Bringing 1uV into 16-16uV [ 0.182424] pm8953_s2_level_ao: Bringing 1uV into 16-16uV [ 0.184416] pm8953_s7_level_ao: Bringing 1uV into 16-16uV [ 0.194950] qcom,gcc-8953 1800000.qcom,gcc: Venus speed bin: 6 [ 0.211161] branch_clk_handoff: gcc_usb_phy_cfg_ahb_clk clock is enabled in HW [ 0.211172] branch_clk_handoff: even though ENABLE_BIT is not set [ 0.212514] qcom,gcc-8953 1800000.qcom,gcc: Registered GCC clocks [ 0.213039] msm8953-pinctrl 1000000.pinctrl: invalid resource [ 0.223520] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0 [ 0.230814] unable to find DT imem DLOAD mode node [ 0.232331] unable to find DT imem EDLOAD mode node [ 0.236605] sps:sps is ready. [ 0.239263] spmi spmi-0: PMIC arbiter version v2 (0x20010000) [ 0.241020] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 6 PVS Version: 0 [ 0.241122] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-pwrcl regulator!!! [ 0.242942] msm_watchdog b017000.qcom,wdt: wdog absent resource not present [ 0.243775] pm8953_s5_avs_limit: Bringing 0uV into 400000-400000uV [ 0.244023] spm_regulator_probe: name=pm8953_s5, range=LV, voltage=870000 uV, mode=AUTO, step rate=1200 uV/us [ 0.244338] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized [ 0.246679] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region@0 [ 0.248106] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0 [ 0.248319] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0 [ 0.248522] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0 [ 0.248667] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0 [ 0.249457] apc_mem_acc_corner: Bringing 0uV into 1-1uV [ 0.250271] cpr4_apss_read_fuse_data: apc_corner: speed bin = 6, CPR fusing revision = 3, foundry id = 1 [ 0.250281] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 0.250315] cpr4_msm8953_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 0.250410] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused LowSVS: open-loop= 625000 uV [ 0.250418] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 680000 uV [ 0.250425] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 785000 uV [ 0.250432] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused TURBO_L1: open-loop= 915000 uV [ 0.250489] cpr4_apss_calculate_target_quotients: apc_corner: fused LowSVS: quot[ 7]= 546 [ 0.250498] cpr4_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 633, quot_offset[ 7]= 85 [ 0.250507] cpr4_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 838, quot_offset[ 7]= 200 [ 0.250515] cpr4_apss_calculate_target_quotients: apc_corner: fused TURBO_L1: quot[ 7]=1076, quot_offset[ 7]= 235 [ 0.250673] cpr4_apss_init_aging: apc: sensor 6 aging init quotient diff = -2, aging RO scale = 2800 QUOT/V [ 0.250789] cpr3_regulator_init_ctrl: apc: Default CPR mode = HW closed-loop [ 0.251796] gfx_mem_acc_corner: Bringing 0uV into 1-1uV [ 0.252279] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 1: target-volt = 580000 uV [ 0.252289] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 2: target-volt = 650000 uV [ 0.252297] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 3: target-volt = 720000 uV [ 0.252309] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[1] 580000 -> 615000 [ 0.252317] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[2] 650000 -> 675000 [ 0.252326] GFX_LDO: msm_gfx_ldo_voltage_init: LDO-mode fuse disabled by default [ 0.286850] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL [ 0.286863] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled [ 0.286886] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22 [ 0.287439] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully [ 0.287477] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL [ 0.287486] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled [ 0.287507] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22 [ 0.288592] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock [ 0.289036] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully [ 0.292325] KPI: Bootloader start count = 19818 [ 0.292334] KPI: Bootloader end count = 136286 [ 0.292340] KPI: Bootloader display count = 74599 [ 0.292346] KPI: Bootloader load kernel count = 6965 [ 0.292352] KPI: Kernel MPM timestamp = 156175 [ 0.292357] KPI: Kernel MPM Clock frequency = 32768 [ 0.292381] socinfo_print: v0.10, id=338, ver=1.1, raw_id=154, raw_ver=0, hw_plat=8, hw_plat_ver=65536 [ 0.292381] accessory_chip=0, hw_plat_subtype=0, pmic_model=65558, pmic_die_revision=65536 foundry_id=2 serial_number=4005978233 [ 0.294941] arm-smmu 1c40000.arm,smmu-kgsl: Couldn't get clock: gpu_ahb_clk [ 0.295380] arm-smmu 1e00000.qcom,iommu: (IDR0.CTTW overridden by dma-coherent property) [ 0.295394] arm-smmu 1e00000.qcom,iommu: stream matching with 124 register groups, mask 0x7fff [ 0.295506] arm-smmu 1e00000.qcom,iommu: found 32 context interrupt(s) but have 30 context banks. assuming 30 context interrupts. [ 0.296318] iommu: Adding device soc:qcom,msm-audio-ion to group 0 [ 0.300742] SCSI subsystem initialized [ 0.300958] usbcore: registered new interface driver usbfs [ 0.301007] usbcore: registered new interface driver hub [ 0.301362] usbcore: registered new device driver usb [ 0.302701] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pm8953@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot [ 0.302729] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pm8953@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from UVLO (Under Voltage Lock Out) [ 0.303040] input: qpnp_pon as /devices/virtual/input/input0 [ 0.304486] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2 [ 0.304572] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.304585] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) [ 0.304870] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.305902] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2 [ 0.305964] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.305974] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) [ 0.306108] i2c-msm-v2 78b7000.i2c: irq:73 when no active transfer [ 0.306204] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.306598] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2 [ 0.306647] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.306656] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem) [ 0.306883] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.307416] media: Linux media interface: v0.10 [ 0.307462] Linux video capture interface: v2.00 [ 0.321150] EDAC MC: Ver: 3.0.0 [ 0.322739] dmi: Firmware registration failed. [ 0.324020] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0 [ 0.324180] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0 [ 0.324326] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region [ 0.324586] ION heap system created [ 0.324881] ION heap mm created at 0x00000000f4800000 with size b400000 [ 0.324898] ION heap qsecom created at 0x00000000f3800000 with size 1000000 [ 0.324912] ION heap qsecom_ta created at 0x00000000f3400000 with size 400000 [ 0.326362] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.326369] ipa ipa_init:4016 fail to register with bus mgr! [ 0.326465] ipa ipa_plat_drv_probe:5046 ipa_init failed [ 0.327186] type = 22 [ 0.327195] PMIC@SID0: PM8953 v1.0 options: 2, 2, 0, 0 [ 0.329687] Advanced Linux Sound Architecture Driver Initialized. [ 0.330249] Bluetooth: Core ver 2.22 [ 0.330283] NET: Registered protocol family 31 [ 0.330290] Bluetooth: HCI device and connection manager initialized [ 0.330302] Bluetooth: HCI socket layer initialized [ 0.330313] Bluetooth: L2CAP socket layer initialized [ 0.330908] NetLabel: Initializing [ 0.330915] NetLabel: domain hash size = 128 [ 0.330921] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.330974] NetLabel: unlabeled traffic allowed by default [ 0.331533] gcc_oxili_gfx3d_clk: set OPP pair(19200000 Hz: 615000 uV) on 1c00000.qcom,kgsl-3d0 [ 0.331876] gcc_oxili_gfx3d_clk: set OPP pair(200000000 Hz: 675000 uV) on 1c00000.qcom,kgsl-3d0 [ 0.332327] gcc_oxili_gfx3d_clk: set OPP pair(600000000 Hz: 0 uV) on 1c00000.qcom,kgsl-3d0 [ 0.332669] gcc-gfx-8953 1800000.qcom,gcc-gfx: Registered GCC GFX clocks. [ 0.332762] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 6 PVS Version: 0 [ 0.336269] cpr3_regulator_measure_aging: apc: average quotient delta=-3 (count=10) [ 0.336293] cpr3_regulator_aging_adjust: apc: aging measurement successful; aging reference adjustment voltage=0 uV [ 0.337109] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c0 [ 0.337120] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-0 [ 0.337131] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c0 [ 0.337140] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-0 [ 0.337150] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c0 [ 0.337159] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-0 [ 0.337166] ramp_lmh_sid: Use Default LMH SID [ 0.337171] ramp_dfs_sid: Use Default DFS SID [ 0.337177] ramp_link_sid: Use Default Link SID [ 0.337220] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c1 [ 0.337229] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-1 [ 0.337239] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c1 [ 0.337247] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-1 [ 0.337257] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c1 [ 0.337266] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-1 [ 0.337272] ramp_lmh_sid: Use Default LMH SID [ 0.337277] ramp_dfs_sid: Use Default DFS SID [ 0.337282] ramp_link_sid: Use Default Link SID [ 0.337333] clock_rcgwr_init: RCGwR Init Completed [ 0.339752] populate_opp_table: clock-cpu-8953: OPP tables populated (cpu 3 and 7) [ 0.339761] print_opp_table: clock_cpu: a53 C0: OPP voltage for 652800000: 1 [ 0.339767] print_opp_table: clock_cpu: a53 C0: OPP voltage for 1804800000: 5 [ 0.339774] print_opp_table: clock_cpu: a53 C1: OPP voltage for 652800000: 1 [ 0.339780] print_opp_table: clock_cpu: a53 C2: OPP voltage for 1804800000: 5 [ 0.340013] sched-energy energy-costs: cpu=0 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340097] CPU0: update cpu_capacity 1024 [ 0.340110] sched-energy energy-costs: cpu=1 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340115] CPU1: update cpu_capacity 1024 [ 0.340127] sched-energy energy-costs: cpu=2 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340132] CPU2: update cpu_capacity 1024 [ 0.340143] sched-energy energy-costs: cpu=3 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340149] CPU3: update cpu_capacity 1024 [ 0.340160] sched-energy energy-costs: cpu=4 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340165] CPU4: update cpu_capacity 1024 [ 0.340176] sched-energy energy-costs: cpu=5 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340181] CPU5: update cpu_capacity 1024 [ 0. Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3-00221 S - IMAGE_VARIANT_STRING=JAADANAZA S - OEM_IMAGE_VERSION_STRING=SCL-7SH169 S - Boot Config, 0x000000e1 B - 269 - PBL, Start B - 3140 - bootable_media_detect_entry, Start B - 15032338 - bootable_media_detect_success, Start B - 15032343 - elf_loader_entry, Start B - 64119309 - auth_hash_seg_entry, Start B - 64119588 - auth_hash_seg_exit, Start B - 64219122 - elf_segs_hash_verify_entry, Start B - 64341267 - PBL, End B - 64304248 - SBL1, Start B - 64361527 - boot_flash_init, Start D - 0 - boot_flash_init, Delta B - 64362381 - boot_config_data_table_init, Start D - 0 - boot_config_data_table_init, Delta - (0 Bytes) B - 64372629 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0 B - 64379552 - sbl1_ddr_set_params, Start B - 64383212 - cpr_init, Start D - 1067 - cpr_init, Delta B - 64388763 - Pre_DDR_clock_init, Start D - 244 - Pre_DDR_clock_init, Delta D - 0 - sbl1_ddr_set_params, Delta B - 64401451 - do ddr sanity test, Start D - 335 - do ddr sanity test, Delta Android Bootloader - UART_DM Initialized!!! [30] SPMI read command failure: cmd_id = 1, error = 2 [40] SPMI read command failure: cmd_id = 1, error = 2 [40] SPMI read command failure: cmd_id = 1, error = 2 [50] SPMI read command failure: cmd_id = 1, error = 2 [50] SPMI read command failure: cmd_id = 1, error = 2 [60] SPMI read command failure: cmd_id = 1, error = 2 [60] SPMI read command failure: cmd_id = 1, error = 2 [70] SPMI read command failure: cmd_id = 1, error = 2 [70] SPMI read command failure: cmd_id = 1, error = 2 [80] SPMI read command failure: cmd_id = 1, error = 2 [80] SPMI read command failure: cmd_id = 1, error = 2 [90] SPMI read command failure: cmd_id = 1, error = 2 [90] SPMI read command failure: cmd_id = 1, error = 2 [100] SPMI read command failure: cmd_id = 1, error = 2 [100] SPMI read command failure: cmd_id = 1, error = 2 [110] SPMI read command failure: cmd_id = 1, error = 2 [110] SPMI read command failure: cmd_id = 1, error = 2 [120] Qseecom Init Done in Appsbl version is 0x1001000 [120] secure app region addr=0x85b00000 size=0x800000[130] TZ App region notif returned with status:0 addr:85b00000 size:8388608 [140] TZ App log region register returned with status:0 addr:8f17f000 size:4096 [140] Qseecom TZ Init Done in Appsbl [160] Loading cmnlib done [170] Loading cmnlib64 done [190] <8>keymaster64: KEYMASTER Init [200] ERROR: Splash image header invalid [200] Not able to search the panel [200] [oem_panel_select] hw_id:0x8 [210] [oem_panel_select] platform_subtype:0x0 [210] [oem_panel_select] panel_id:0x1 [220] [LK_sn65dsi83_i2c_init] panel [220] [mipi2lvds_chip_reset] enter [320] [mipi2lvds_chip_reset] leave [320] richard: sn65dsi83 in I2C TP1 [330] QUP: I2C status flags :0x1121c4 [330] qup_i2c_xfer error -5 [330] QUP: I2C status flags :0x1121c4 [340] qup_i2c_xfer error -5 [340] QUP: I2C status flags :0x1121c4 [340] qup_i2c_xfer error -5 [340] [is_sn65dsi83] icn6202 [350] QUP: I2C status flags :0x1121c4 [350] qup_i2c_xfer error -5 [350] ----sn65dsi83_write_byte faile ont time return!----- [360] [LK_Mcu_Init] start 20220823 [370] SPMI read command failure: cmd_id = 1, error = 2 [370] SPMI read command failure: cmd_id = 1, error = 2 [380] [LK_Mcu_Init] 0x02 0x91,0x04,0x01,0x63,0xf7 [1380] [init_panel_data] panel_id:0x1 [1390] SPMI read command failure: cmd_id = 1, error = 2 [1400] SPMI read command failure: cmd_id = 1, error = 2 [1400] SPMI read command failure: cmd_id = 1, error = 2 [1410] SPMI read command failure: cmd_id = 1, error = 2 [1410] SPMI read command failure: cmd_id = 1, error = 2 [1420] SPMI read command failure: cmd_id = 1, error = 2 [1420] SPMI read command failure: cmd_id = 1, error = 2 [1430] SPMI read command failure: cmd_id = 1, error = 2 [1430] SPMI read command failure: cmd_id = 1, error = 2 [1440] SPMI read command failure: cmd_id = 1, error = 2 [1440] SPMI read command failure: cmd_id = 1, error = 2 [1450] SPMI read command failure: cmd_id = 1, error = 2 [1450] SPMI read command failure: cmd_id = 1, error = 2 [1460] SPMI read command failure: cmd_id = 1, error = 2 [1460] SPMI read command failure: cmd_id = 1, error = 2 [1470] SPMI read command failure: cmd_id = 1, error = 2 [1470] SPMI read command failure: cmd_id = 1, error = 2 [1480] SPMI read command failure: cmd_id = 1, error = 2 [1490] SPMI read command failure: cmd_id = 1, error = 2 [1490] SPMI read command failure: cmd_id = 1, error = 2 [1500] SPMI read command failure: cmd_id = 1, error = 2 [1500] SPMI read command failure: cmd_id = 1, error = 2 [1510] SPMI read command failure: cmd_id = 1, error = 2 [1510] SPMI read command failure: cmd_id = 1, error = 2 [1520] SPMI read command failure: cmd_id = 1, error = 2 [1520] SPMI read command failure: cmd_id = 1, error = 2 [1530] SPMI read command failure: cmd_id = 1, error = 2 [1530] SPMI read command failure: cmd_id = 1, error = 2 [1540] SPMI read command failure: cmd_id = 1, error = 2 [1540] SPMI read command failure: cmd_id = 1, error = 2 [1550] SPMI read command failure: cmd_id = 1, error = 2 [1550] SPMI read command failure: cmd_id = 1, error = 2 [1560] SPMI read command failure: cmd_id = 1, error = 2 [1560] SPMI read command failure: cmd_id = 1, error = 2 [1570] SPMI read command failure: cmd_id = 1, error = 2 [1570] SPMI read command failure: cmd_id = 1, error = 2 [1580] SPMI read command failure: cmd_id = 1, error = 2 [1580] SPMI read command failure: cmd_id = 1, error = 2 [1590] SPMI read command failure: cmd_id = 1, error = 2 [1650] ERROR: Splash image header invalid [2090] MultiSlot true, partition name boot_b [2090] AVB version 2 [2100] avb_slot_verify.c[2100] :[2100] 417[2100] : DEBUG: [2100] Loading vbmeta struct from partition '[2110] vbmeta_b[2110] '. [2120] ValidateVbmetaPublicKey PublicKeyLength 1032, PublicKeyMetadataLength 0 [2120] ValidateVbmetaPublicKey OutIsTrusted 1, UserKey 0 [2130] ReadRollbackIndex Location 0, RollbackIndex 0 [2130] avb_slot_verify.c[2140] :[2140] 417[2140] : DEBUG: [2140] Loading vbmeta struct from partition '[2140] system_b[2140] '. [2140] negative Offset (-64) converted to (0xafffffc0) [2150] read from system_b, 0x40 bytes at Offset 0xafffffc0, partition size 3713138688 [2160] StartBlock 0x57ffff, ReadOffset 0x1c0, read_size 0x40 [2160] read from system_b, 0x740 bytes at Offset 0xaff67000, partition size 3713138688 [2170] LastBlock 0x57fb3b, ReadOffset 0x0, read_size 0x140 [2180] ReadRollbackIndex Location 2, RollbackIndex 0 [2180] avb_slot_verify.c[2180] :[2180] 157[2190] : DEBUG: [2190] boot_b[2190] : Loading entire partition. [2340] avb_slot_verify.c[2340] :[2340] 236[2340] : DEBUG: [2340] boot_b[2340] : success: Image verification completed. [2350] avb_slot_verify.c[2350] :[2350] 157[2350] : DEBUG: [2350] dtbo_b[2350] : Loading entire partition. [2360] avb_slot_verify.c[2360] :[2360] 236[2370] : DEBUG: [2370] dtbo_b[2370] : success: Image verification completed. [2370] system_b uuid: ba578583-2acb-61e5-e41c-538c238ecbbb [2380] boot_b uuid: 66155ccf-0dc8-9ca7-1354-d24c9345f4ef [2380] vbmeta_b uuid: 888c9b60-9404-c58f-6c2d-3f6cec8a56c8 [2390] State: Unlocked, AvbSlotVerify returned OK, continue boot [2390] Requested Partition: boot [2400] Loaded Partition: boot [2400] Requested Partition: dtbo [2400] Loaded Partition: boot [2400] Loaded Partition: dtbo [2410] Total loaded partition 3 [2410] Device is unlocked! Skipping verification... [2420] <8>keymaster64: cmd_id=SET_ROT begin [2420] <8>keymaster64: Error: qsee_cfg_getpropval in get_enable_set_bandwidth failed for enable_set_bandwidth, ret_size = 0 [2430] <8>keymaster64: rot.data_length: 32 [2430] <8>keymaster64: cmd_id=SET_ROT done with ret: 0 time taken: 0 [2440] <8>keymaster64: cmd_id=GET_VERSION begin [2450] Authentication Key not yet programmed [2450] <8>keymaster64: qsee_stor_device_init error ret: -14 [2460] <8>keymaster64: cmd_id=GET_VERSION done with ret: 0 time taken: 12 [2460] <8>keymaster64: cmd_id=SET_BOOT_STATE begin [2470] <8>keymaster64: is_unlocked: 1 [2470] <8>keymaster64: color: 1 [2470] <8>keymaster64: system_version: 90000 [2480] <8>keymaster64: system_security_level 202203 [2480] <8>keymaster64: cmd_id=SET_BOOT_STATE done with ret: 0 time taken: 0 [2490] Sending Root of Trust to trustzone: end [2490] <8>keymaster64: cmd_id=KEYMASTER_SET_VBH begin [2500] <8>keymaster64: cmd_id=KEYMASTER_SET_VBH done with ret: 0 time taken: 0 [2510] VB2: boot state: orange(1) [2510] Boot State is : 1 [2510] quick boot Device will not DISPLAY_MENU_ORANGE [3190] update_cmdline: 0,1 [3190] UpdateCmdLine vbcmdline present len 838 [3200] SPMI read command failure: cmd_id = 1, error = 2 [3200] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci firmware_class.path=/vendor/firmware_mnt/image androidboot.usbco[3470] kaslr-Seed is added to chosen node [3520] <8>keymaster64: cmd_id=MILESTONE_CALL begin [3530] <8>keymaster64: cmd_id=MILESTONE_CALL done with ret: 0 time taken: 0 [3530] Success [3540] Qseecom De-Init Done in Appsbl [3550] free_verified_boot_resource [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.112-perf (android20@carocean-PowerEdge-R540) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #10 SMP PREEMPT Fri Nov 11 14:44:56 CST 2022 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] Machine: Qualcomm Technologies, Inc. SDM450 NOPMI MTP [ 0.000000] core_ctl: disable_cpumask=0-7 [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ffc00000, size 4 MiB [ 0.000000] OF: reserved mem: initialized node adsp_region@0, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f800000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node gpu_region@0, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f000000, size 8 MiB [ 0.000000] OF: reserved mem: initialized node venus_region@0, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: invalid size property in 'mem_dump_region' node. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f4800000, size 180 MiB [ 0.000000] OF: reserved mem: initialized node secure_region@0, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f3800000, size 16 MiB [ 0.000000] OF: reserved mem: initialized node qseecom_region@0, compatible id shared-dma-pool [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f3400000, size 4 MiB [ 0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000085b00000, size 13 MiB [ 0.000000] OF: reserved mem: initialized node other_ext_region@0, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x0000000086c00000, size 106 MiB [ 0.000000] OF: reserved mem: initialized node modem_region@0, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x000000008d600000, size 17 MiB [ 0.000000] OF: reserved mem: initialized node adsp_fw_region@0, compatible id removed-dma-pool [ 0.000000] Removed memory: created DMA memory pool at 0x000000008e700000, size 7 MiB [ 0.000000] OF: reserved mem: initialized node wcnss_fw_region@0, compatible id removed-dma-pool [ 0.000000] cma: Reserved 16 MiB at 0x00000000f2400000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] Did not receive the expected number of bytes from PRNG: 0 [ 0.000000] percpu: Embedded 23 pages/cpu @ffffffcd72145000 s55192 r8192 d30824 u94208 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 931072 [ 0.000000] lvds1280x480 [ 0.000000] lcm_set_parasize 1 [ 0.000000] Kernel command line: core_ctl_disable_cpumask=0-7 kpti=0 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci firmware_class.path=/vendor/firmware_mnt/image androidboot.usbconfigfs=true loop.max_part=7 buildvariant=user androidboot.emmc=true androidboot.verifiedbootstate=orange androidboot.keymaster=1 dm="1 vroot none ro 1,0 5676008 verity 1 PARTUUID=ba578583-2acb-61e5-e41c-538c238ecbbb PARTUUID=ba578583-2acb-61e5-e41c-538c238ecbbb 4096 4096 709501 709501 sha1 74666a10a749a123d0114af12619f4fe534a7f18 7447bc586d8e3c06b0a923398f0e60f4240e6021875ca3824732fd83d23b95d2 10 restart_on_corruption ignore_zero_blocks use_fec_from_device PARTUUID=ba578583-2acb-61e5-e41c-538c238ecbbb fec_roots 2 fec_blocks 715089 fec_start 715089" root=/dev/dm-0 androidboot.vbmeta.device=PARTUUID=888c9b60-9404-c58f-6c2d-3f6cec8a56c8 androidboot.vbmeta.avb_version=1.0 androidbo [ 0.000000] device-mapper: init: will configure 1 devices [ 0.000000] ckx_touch_boot_mode 1! recovery [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 917504 bytes [ 0.000000] log_buf_len min size: 131072 bytes [ 0.000000] log_buf_len: 1048576 bytes [ 0.000000] early log buf free: 126184(96%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Memory: 3410460K/3785728K available (15868K kernel code, 1604K rwdata, 6568K rodata, 4096K init, 1141K bss, 133604K reserved, 241664K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0xffffff8aede80000 - 0xffffff8aeee00000 ( 15872 KB) [ 0.000000] .rodata : 0xffffff8aeee00000 - 0xffffff8aef600000 ( 8192 KB) [ 0.000000] .init : 0xffffff8aef600000 - 0xffffff8aefa00000 ( 4096 KB) [ 0.000000] .data : 0xffffff8aefa00000 - 0xffffff8aefb91200 ( 1605 KB) [ 0.000000] .bss : 0xffffff8aefb91200 - 0xffffff8aefcae784 ( 1142 KB) [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf32400000 - 0xffffffbf36000000 ( 60 MB actual) [ 0.000000] memory : 0xffffffcc90000000 - 0xffffffcd80000000 ( 3840 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] [ 0.000000] ********************************************************** [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000] ** ** [ 0.000000] ** trace_printk() being used. Allocating extra memory. ** [ 0.000000] ** ** [ 0.000000] ** This means that this is a DEBUG kernel and it is ** [ 0.000000] ** unsafe for production use. ** [ 0.000000] ** ** [ 0.000000] ** If you see this message and you are not debugging ** [ 0.000000] ** the kernel, report this immediately to your vendor! ** [ 0.000000] ** ** [ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.000000] ********************************************************** [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000022] clocksource: Switched to clocksource arch_sys_counter [ 0.001131] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.001145] pid_max: default: 32768 minimum: 301 [ 0.001228] Security Framework initialized [ 0.001238] SELinux: Initializing. [ 0.001336] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001346] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.002552] /cpus/cpu@0: Missing clock-frequency property [ 0.002566] /cpus/cpu@1: Missing clock-frequency property [ 0.002577] /cpus/cpu@2: Missing clock-frequency property [ 0.002589] /cpus/cpu@3: Missing clock-frequency property [ 0.002601] /cpus/cpu@100: Missing clock-frequency property [ 0.002616] /cpus/cpu@101: Missing clock-frequency property [ 0.002630] /cpus/cpu@102: Missing clock-frequency property [ 0.002645] /cpus/cpu@103: Missing clock-frequency property [ 0.002753] sched-energy: Sched-energy-costs installed from DT [ 0.002769] ASID allocator initialised with 32768 entries [ 0.018652] cpu_clock_pwr_init: Power clocks configured [ 0.021664] MSM Memory Dump base table set up [ 0.021692] MSM Memory Dump apps data table set up [ 0.021849] EFI services will not be available. [ 0.030823] CPU1: Booted secondary processor [410fd034] [ 0.039502] CPU2: Booted secondary processor [410fd034] [ 0.048145] CPU3: Booted secondary processor [410fd034] [ 0.056904] CPU4: Booted secondary processor [410fd034] [ 0.065598] CPU5: Booted secondary processor [410fd034] [ 0.074285] CPU6: Booted secondary processor [410fd034] [ 0.082957] CPU7: Booted secondary processor [410fd034] [ 0.083236] Brought up 8 CPUs [ 0.083268] SMP: Total of 8 processors activated. [ 0.083277] CPU features: detected feature: 32-bit EL0 Support [ 0.083285] CPU features: kernel page table isolation forced OFF by command line option [ 0.083296] CPU: All CPU(s) started at EL1 [ 0.083376] alternatives: patching kernel code [ 0.083604] CPU7: update max cpu_capacity 1024 [ 0.090051] CPU7: update max cpu_capacity 1024 [ 0.148605] DMI not present or invalid. [ 0.149029] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.149048] futex hash table entries: 2048 (order: 6, 262144 bytes) [ 0.159391] pinctrl core: initialized pinctrl subsystem [ 0.160330] NET: Registered protocol family 16 [ 0.162902] schedtune: init normalization constants... [ 0.162915] schedtune: CLUSTER[0-3] min_pwr: 1 max_pwr: 180 [ 0.162923] schedtune: CPU[0] min_pwr: 1 max_pwr: 65 [ 0.162931] schedtune: CPU[1] min_pwr: 1 max_pwr: 65 [ 0.162938] schedtune: CPU[2] min_pwr: 1 max_pwr: 65 [ 0.162945] schedtune: CPU[3] min_pwr: 1 max_pwr: 65 [ 0.162953] schedtune: CLUSTER[4-7] min_pwr: 1 max_pwr: 175 [ 0.162960] schedtune: CPU[4] min_pwr: 1 max_pwr: 65 [ 0.162968] schedtune: CPU[5] min_pwr: 1 max_pwr: 65 [ 0.162975] schedtune: CPU[6] min_pwr: 1 max_pwr: 65 [ 0.162982] schedtune: CPU[7] min_pwr: 1 max_pwr: 65 [ 0.162989] schedtune: SYSTEM min_pwr: 10 max_pwr: 875 [ 0.162997] schedtune: using normalization constants mul: 789479538 sh1: 1 sh2: 9 [ 0.163001] schedtune: verify normalization constants... [ 0.163007] schedtune: max_pwr/2^0: 865 => norm_pwr: 1024 [ 0.163013] schedtune: max_pwr/2^1: 432 => norm_pwr: 511 [ 0.163019] schedtune: max_pwr/2^2: 216 => norm_pwr: 255 [ 0.163025] schedtune: max_pwr/2^3: 108 => norm_pwr: 127 [ 0.163031] schedtune: max_pwr/2^4: 54 => norm_pwr: 63 [ 0.163036] schedtune: max_pwr/2^5: 27 => norm_pwr: 31 [ 0.163042] schedtune: configured to support 5 boost groups [ 0.164902] cpuidle: using governor menu [ 0.166116] cpuidle: using governor qcom [ 0.171501] vdso: 2 pages (1 code @ ffffff8aeee07000, 1 data @ ffffff8aefa04000) [ 0.171523] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.172589] DMA: preallocated 256 KiB pool for atomic allocations [ 0.177821] smd_channel_probe_now: allocation table not initialized [ 0.178658] smd_channel_probe_now: allocation table not initialized [ 0.179131] smd_channel_probe_now: allocation table not initialized [ 0.179851] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches [ 0.180500] pm8953_s1: Bringing 1uV into 16-16uV [ 0.181056] pm8953_s2_level: Bringing 1uV into 16-16uV [ 0.181424] pm8953_s2_floor_level: Bringing 1uV into 16-16uV [ 0.182348] pm8953_s2_level_ao: Bringing 1uV into 16-16uV [ 0.184335] pm8953_s7_level_ao: Bringing 1uV into 16-16uV [ 0.194871] qcom,gcc-8953 1800000.qcom,gcc: Venus speed bin: 6 [ 0.211058] branch_clk_handoff: gcc_usb_phy_cfg_ahb_clk clock is enabled in HW [ 0.211069] branch_clk_handoff: even though ENABLE_BIT is not set [ 0.212415] qcom,gcc-8953 1800000.qcom,gcc: Registered GCC clocks [ 0.212956] msm8953-pinctrl 1000000.pinctrl: invalid resource [ 0.223510] platform soc:qcom,kgsl-hyp: assigned reserved memory node gpu_region@0 [ 0.230792] unable to find DT imem DLOAD mode node [ 0.232350] unable to find DT imem EDLOAD mode node [ 0.236627] sps:sps is ready. [ 0.239270] spmi spmi-0: PMIC arbiter version v2 (0x20010000) [ 0.241013] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 6 PVS Version: 0 [ 0.241104] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Get vdd-pwrcl regulator!!! [ 0.243053] msm_watchdog b017000.qcom,wdt: wdog absent resource not present [ 0.244020] pm8953_s5_avs_limit: Bringing 0uV into 400000-400000uV [ 0.244291] spm_regulator_probe: name=pm8953_s5, range=LV, voltage=870000 uV, mode=AUTO, step rate=1200 uV/us [ 0.244405] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized [ 0.246833] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region@0 [ 0.248265] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0 [ 0.248472] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0 [ 0.248677] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0 [ 0.248821] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0 [ 0.249612] apc_mem_acc_corner: Bringing 0uV into 1-1uV [ 0.250436] cpr4_apss_read_fuse_data: apc_corner: speed bin = 6, CPR fusing revision = 3, foundry id = 1 [ 0.250447] cpr4_msm8953_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 0.250480] cpr4_msm8953_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 0.250576] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused LowSVS: open-loop= 625000 uV [ 0.250584] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 680000 uV [ 0.250591] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 785000 uV [ 0.250598] cpr4_apss_calculate_open_loop_voltages: apc_corner: fused TURBO_L1: open-loop= 915000 uV [ 0.250651] cpr4_apss_calculate_target_quotients: apc_corner: fused LowSVS: quot[ 7]= 546 [ 0.250660] cpr4_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 633, quot_offset[ 7]= 85 [ 0.250669] cpr4_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 838, quot_offset[ 7]= 200 [ 0.250677] cpr4_apss_calculate_target_quotients: apc_corner: fused TURBO_L1: quot[ 7]=1076, quot_offset[ 7]= 235 [ 0.250837] cpr4_apss_init_aging: apc: sensor 6 aging init quotient diff = -2, aging RO scale = 2800 QUOT/V [ 0.250955] cpr3_regulator_init_ctrl: apc: Default CPR mode = HW closed-loop [ 0.251905] gfx_mem_acc_corner: Bringing 0uV into 1-1uV [ 0.252392] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 1: target-volt = 580000 uV [ 0.252401] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 2: target-volt = 650000 uV [ 0.252409] GFX_LDO: msm_gfx_ldo_voltage_init: LDO corner 3: target-volt = 720000 uV [ 0.252421] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[1] 580000 -> 615000 [ 0.252429] GFX_LDO: msm_gfx_ldo_adjust_init_voltage: adjusted the open-loop voltage[2] 650000 -> 675000 [ 0.252438] GFX_LDO: msm_gfx_ldo_voltage_init: LDO-mode fuse disabled by default [ 0.286924] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL [ 0.286937] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled [ 0.286960] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22 [ 0.287510] dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully [ 0.287549] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL [ 0.287558] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled [ 0.287579] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22 [ 0.288667] pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock [ 0.289112] dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully [ 0.292461] KPI: Bootloader start count = 26679 [ 0.292471] KPI: Bootloader end count = 143123 [ 0.292476] KPI: Bootloader display count = 81437 [ 0.292482] KPI: Bootloader load kernel count = 6958 [ 0.292489] KPI: Kernel MPM timestamp = 163059 [ 0.292494] KPI: Kernel MPM Clock frequency = 32768 [ 0.292517] socinfo_print: v0.10, id=338, ver=1.1, raw_id=154, raw_ver=0, hw_plat=8, hw_plat_ver=65536 [ 0.292517] accessory_chip=0, hw_plat_subtype=0, pmic_model=65558, pmic_die_revision=65536 foundry_id=2 serial_number=4005978233 [ 0.295129] arm-smmu 1c40000.arm,smmu-kgsl: Couldn't get clock: gpu_ahb_clk [ 0.295570] arm-smmu 1e00000.qcom,iommu: (IDR0.CTTW overridden by dma-coherent property) [ 0.295583] arm-smmu 1e00000.qcom,iommu: stream matching with 124 register groups, mask 0x7fff [ 0.295694] arm-smmu 1e00000.qcom,iommu: found 32 context interrupt(s) but have 30 context banks. assuming 30 context interrupts. [ 0.296534] iommu: Adding device soc:qcom,msm-audio-ion to group 0 [ 0.300969] SCSI subsystem initialized [ 0.301181] usbcore: registered new interface driver usbfs [ 0.301230] usbcore: registered new interface driver hub [ 0.301570] usbcore: registered new device driver usb [ 0.302940] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pm8953@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot [ 0.302969] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pm8953@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from UVLO (Under Voltage Lock Out) [ 0.303282] input: qpnp_pon as /devices/virtual/input/input0 [ 0.304734] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2 [ 0.304821] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.304834] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) [ 0.305118] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.306106] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2 [ 0.306171] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.306182] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) [ 0.306338] i2c-msm-v2 78b7000.i2c: irq:73 when no active transfer [ 0.306446] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.306811] i2c-msm-v2 7af5000.i2c: probing driver i2c-msm-v2 [ 0.306868] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.306879] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem) [ 0.307146] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.307645] media: Linux media interface: v0.10 [ 0.307691] Linux video capture interface: v2.00 [ 0.321349] EDAC MC: Ver: 3.0.0 [ 0.323029] dmi: Firmware registration failed. [ 0.324316] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0 [ 0.324470] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0 [ 0.324621] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region [ 0.324885] ION heap system created [ 0.325125] ION heap mm created at 0x00000000f4800000 with size b400000 [ 0.325142] ION heap qsecom created at 0x00000000f3800000 with size 1000000 [ 0.325155] ION heap qsecom_ta created at 0x00000000f3400000 with size 400000 [ 0.326657] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.326665] ipa ipa_init:4016 fail to register with bus mgr! [ 0.326762] ipa ipa_plat_drv_probe:5046 ipa_init failed [ 0.327506] type = 22 [ 0.327515] PMIC@SID0: PM8953 v1.0 options: 2, 2, 0, 0 [ 0.329949] Advanced Linux Sound Architecture Driver Initialized. [ 0.330509] Bluetooth: Core ver 2.22 [ 0.330545] NET: Registered protocol family 31 [ 0.330552] Bluetooth: HCI device and connection manager initialized [ 0.330564] Bluetooth: HCI socket layer initialized [ 0.330574] Bluetooth: L2CAP socket layer initialized [ 0.331174] NetLabel: Initializing [ 0.331181] NetLabel: domain hash size = 128 [ 0.331186] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.331239] NetLabel: unlabeled traffic allowed by default [ 0.331764] gcc_oxili_gfx3d_clk: set OPP pair(19200000 Hz: 615000 uV) on 1c00000.qcom,kgsl-3d0 [ 0.332125] gcc_oxili_gfx3d_clk: set OPP pair(200000000 Hz: 675000 uV) on 1c00000.qcom,kgsl-3d0 [ 0.332577] gcc_oxili_gfx3d_clk: set OPP pair(600000000 Hz: 0 uV) on 1c00000.qcom,kgsl-3d0 [ 0.332925] gcc-gfx-8953 1800000.qcom,gcc-gfx: Registered GCC GFX clocks. [ 0.333022] cpu-clock-8953 b114000.qcom,cpu-clock-8953: Speed bin: 6 PVS Version: 0 [ 0.336505] cpr3_regulator_measure_aging: apc: average quotient delta=-2 (count=10) [ 0.336528] cpr3_regulator_aging_adjust: apc: aging measurement successful; aging reference adjustment voltage=0 uV [ 0.337341] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c0 [ 0.337352] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-0 [ 0.337363] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c0 [ 0.337372] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-0 [ 0.337381] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c0 [ 0.337390] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-0 [ 0.337397] ramp_lmh_sid: Use Default LMH SID [ 0.337402] ramp_dfs_sid: Use Default DFS SID [ 0.337407] ramp_link_sid: Use Default Link SID [ 0.337451] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,dfs-sid-c1 [ 0.337460] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No DFS SID tables found for Cluster-1 [ 0.337469] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,link-sid-c1 [ 0.337478] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No Link SID tables found for Cluster-1 [ 0.337488] cpu-clock-8953 b114000.qcom,cpu-clock-8953: missing qcom,lmh-sid-c1 [ 0.337496] cpu-clock-8953 b114000.qcom,cpu-clock-8953: No LMH SID tables found for Cluster-1 [ 0.337502] ramp_lmh_sid: Use Default LMH SID [ 0.337506] ramp_dfs_sid: Use Default DFS SID [ 0.337511] ramp_link_sid: Use Default Link SID [ 0.337563] clock_rcgwr_init: RCGwR Init Completed [ 0.339987] populate_opp_table: clock-cpu-8953: OPP tables populated (cpu 3 and 7) [ 0.339996] print_opp_table: clock_cpu: a53 C0: OPP voltage for 652800000: 1 [ 0.340001] print_opp_table: clock_cpu: a53 C0: OPP voltage for 1804800000: 5 [ 0.340008] print_opp_table: clock_cpu: a53 C1: OPP voltage for 652800000: 1 [ 0.340014] print_opp_table: clock_cpu: a53 C2: OPP voltage for 1804800000: 5 [ 0.340323] sched-energy energy-costs: cpu=0 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340331] CPU0: update cpu_capacity 1024 [ 0.340342] sched-energy energy-costs: cpu=1 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340348] CPU1: update cpu_capacity 1024 [ 0.340359] sched-energy energy-costs: cpu=2 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340364] CPU2: update cpu_capacity 1024 [ 0.340375] sched-energy energy-costs: cpu=3 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340380] CPU3: update cpu_capacity 1024 [ 0.340391] sched-energy energy-costs: cpu=4 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340397] CPU4: update cpu_capacity 1024 [ 0.340408] sched-energy energy-costs: cpu=5 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340413] CPU5: update cpu_capacity 1024 [ 0.340424] sched-energy energy-costs: cpu=6 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340429] CPU6: update cpu_capacity 1024 [ 0.340440] sched-energy energy-costs: cpu=7 eff=1024 [freq=652800 cap=371 power_d0=5] -> [freq=2400000 cap=1024 power_d0=65] [ 0.340446] CPU7: update cpu_capacity 1024 [ 0.341742] sched-energy energy-costs: Sched-energy-costs capacity updated [ 0.341945] gdsc_oxili_gx: supplied by msm_gfx_ldo [ 0.343192] arm-smmu 1c40000.arm,smmu-kgsl: (IDR0.CTTW overridden by dma-coherent property) [ 0.343205] arm-smmu 1c40000.arm,smmu-kgsl: stream matching with 4 register groups, mask 0x7fff [ 0.346280] cpufreq: driver msm up and running [ 0.346506] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. [ 0.346509] ipa ipa_init:4016 fail to register with bus mgr! [ 0.346552] ipa ipa_plat_drv_probe:5046 ipa_init failed [ 0.347333] clocksource: Switched to clocksource arch_sys_counter [ 0.350083] CPU4: update max cpu_capacity 1024 [ 0.377371] VFS: Disk quotas dquot_6.6.0 [ 0.377409] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.377460] msm_bus_fabric_init_driver [ 0.381760] msm_bus_device 580000.ad-hoc-bus: Bus scaling driver probe successful [ 0.382809] NET: Registered protocol family 2 [ 0.383221] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.383399] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.383738] TCP: Hash tables configured (established 32768 bind 32768) [ 0.383782] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.383833] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.383975] NET: Registered protocol family 1 [ 0.384655] gcc-mdss-8953 1800000.qcom,gcc-mdss: Registered GCC MDSS clocks. [ 0.386368] ipa ipa2_uc_state_check:297 uC interface not initialized [ 0.386379] ipa ipa_sps_irq_control_all:963 EP (2) not allocated. [ 0.386383] ipa ipa_sps_irq_control_all:963 EP (5) not allocated. [ 0.388713] sps:BAM 0x0000000007904000 is registered. [ 0.390162] sps:BAM 0x0000000007904000 (va:0xffffff8009040000) enabled: ver:0x27, number of pipes:20 [ 0.395326] IPA driver initialization was successful. [ 0.395659] Trying to unpack rootfs image as initramfs... [ 0.536593] Freeing initrd memory: 6352K [ 0.537689] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.540445] audit: initializing netlink subsys (disabled) [ 0.540478] audit: type=2000 audit(0.539:1): initialized [ 0.540991] workingset: timestamp_bits=62 max_order=20 bucket_order=0 [ 0.545129] Registering sdcardfs 0.1 [ 0.545281] fuse init (API version 7.26) [ 0.545683] exFAT: Core Version 1.2.24 [ 0.545687] exFAT: FS Version 1.2.24 [ 0.545902] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully [ 0.545906] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully [ 0.545910] pfk [pfk_init]: Driver initialized successfully [ 0.548562] io scheduler noop registered [ 0.548702] io scheduler cfq registered (default) [ 0.556152] pmi632 do not exist!! [ 0.556180] dsi1_bridge soc:qcom,dsi1_bridge: dsi1_bridge_probe success. [ 0.556347] msm_mdss_get_res_byname: 'vbif_nrt_phys' resource not found [ 0.556359] mdss_mdp_probe+0x1a4/0x1318->msm_mdss_ioremap_byname: 'vbif_nrt_phys' msm_mdss_get_res_byname failed [ 0.556529] mdss_mdp_irq_clk_register: unable to get clk: lut_clk [ 0.556540] mdss_mdp_irq_clk_register: unable to get clk: mnoc_clk [ 0.556840] No change in context(0==0), skip [ 0.557533] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0 [ 0.557548] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1 [ 0.557552] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2 [ 0.557563] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3 [ 0.557574] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0 [ 0.557582] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read [ 0.557662] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read [ 0.557669] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-bus-througput-factor : u32 array read [ 0.557851] xlog_status: enable:1, panic:1, dump:2 [ 0.558070] iommu: Adding device 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_unsec_cb to group 1 [ 0.558262] iommu: Adding device 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_sec_cb to group 2 [ 0.558431] mdss_mdp_probe: mdss version = 0x10100000, bootloader display is on, num 1, intf_sel=0x00000100 [ 0.560004] mdss_smmu_util_parse_dt_clock: clocks are not defined [ 0.560014] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful! [ 0.560069] mdss_smmu_util_parse_dt_clock: clocks are not defined [ 0.560075] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful! [ 0.560486] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.560494] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.560501] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.560996] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0 [ 0.561095] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_ckx_lvds1280x480_video:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_ckx_lvds1280x480_video [ 0.561121] mdss_dsi_panel_init: Panel Name = ckx lvds1280x480 video mode dsi panel [ 0.561213] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_ckx_lvds1280x480_video" (ffffffcd6d06b288) [ 0.561220] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-on-command [ 0.561225] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command [ 0.561230] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command [ 0.561234] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node: [ 0.561293] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-off-command [ 0.561298] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command [ 0.561303] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command [ 0.561317] mdss_dsi_parse_panel_features: ulps feature disabled [ 0.561321] mdss_dsi_parse_panel_features: ulps during suspend feature disabled [ 0.561326] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0 [ 0.561337] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on [ 0.561342] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off [ 0.561378] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.561384] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22 [ 0.561455] mdss_dsi_parse_ctrl_params:4189 Unable to read qcom,display-id, data=0000000000000000,len=20 [ 0.561465] mdss_dsi_parse_gpio_params: bklt_en gpio not specified [ 0.561469] mdss_dsi_parse_gpio_params: ext vdd gpio not specified [ 0.561473] ----ctrl_pdata->rst_gpio:61----- [ 0.561504] msm_mdss_get_res_byname: 'dsi_phy_regulator' resource not found [ 0.561515] mdss_dsi_retrieve_ctrl_resources+0xc8/0x230->msm_mdss_ioremap_byname: 'dsi_phy_regulator' msm_mdss_get_res_byname failed [ 0.561519] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8008739000 ctrl_size=400 phy_base=ffffff800873b400 phy_size=580 [ 0.561644] dsi_panel_device_register: Continuous splash enabled [ 0.561782] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0 [ 0.562615] [mdss_dsi_request_gpios] gpio_request disp_rst_n suc [ 0.563448] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x2 [ 0.563766] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1 [ 0.563873] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_ckx_lvds1280x480_video:1:none:cfg:single_dsi panel_name:none [ 0.563877] mdss_dsi_config_panel: can't find panel node 0:qcom,mdss_dsi_ckx_lvds1280x480_video:1:none:cfg:single_dsi [ 0.563880] mdss_dsi_ctrl_probe: panel configuration failed [ 0.563894] mdss_dsi_ctrl: probe of 1a96000.qcom,mdss_dsi_ctrl1 failed with error -22 [ 0.564236] mdss_dsi_status_init: DSI status check interval:5000 [ 0.564788] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel [ 0.565296] mdss_fb_probe: fb0: split_mode:0 left:0 right:0 [ 0.565635] mdss_fb_register: FrameBuffer[0] 1280x480 registered successfully! [ 0.565841] mdss_fb_probe: fb1: split_mode:0 left:0 right:0 [ 0.565908] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully! [ 0.565961] mdss_mdp_splash_parse_dt: splash mem child node is not present [ 0.566147] qcom-sps-dma 7884000.qcom,sps-dma: dma_async_device_register: device has no channels! [ 0.566198] qcom-sps-dma 7ac4000.qcom,sps-dma: dma_async_device_register: device has no channels! [ 0.568894] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 0.568901] hyp_assign_table: Failed to assign memory protection, ret = -5 [ 0.568905] memshare: hyp_assign_phys failed size=2097152 err=-5 [ 0.568939] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped. [ 0.569139] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped. [ 0.570920] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 0.570926] hyp_assign_table: Failed to assign memory protection, ret = -5 [ 0.570931] memshare: hyp_assign_phys failed size=5242880 err=-5 [ 0.570940] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped. [ 0.572286] minidump-id not found for a506_zap [ 0.572304] subsys-pil-tz soc:qcom,kgsl-hyp: for a506_zap segments only will be dumped. [ 0.572640] minidump-id not found for adsp [ 0.572734] minidump-id not found for wcnss [ 0.572902] minidump-id not found for venus [ 0.572913] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped. [ 0.573783] minidump-id not found for modem [ 0.574933] wcnss: wcnss_wlan probed in built-in mode [ 0.575446] msm_serial 78af000.serial: msm_serial: detected port #0 [ 0.575465] msm_serial 78af000.serial: uartclk = 7372800 [ 0.575498] 78af000.serial: ttyHSL0 at MMIO 0x78af000 (irq = 66, base_baud = 460800) is a MSM [ 0.575507] msm_serial: console setup on port #0 [ 3.600346] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR [ 3.600349] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR [ 3.698578] console [ttyHSL0] enabled [ 3.706813] msm_serial 7aef000.serial: msm_serial: detected port #1 [ 3.710215] msm_serial 7aef000.serial: uartclk = 19200000 [ 3.716296] 7aef000.serial: ttyHSL1 at MMIO 0x7aef000 (irq = 67, base_baud = 1200000) is a MSM [ 3.721999] msm_serial 78b0000.serial: msm_serial: detected port #2 [ 3.730349] msm_serial 78b0000.serial: uartclk = 7372800 [ 3.736504] 78b0000.serial: ttyHSL2 at MMIO 0x78b0000 (irq = 68, base_baud = 460800) is a MSM [ 3.742396] msm_serial: driver initialized [ 3.750938] msm_serial_hs module loaded [ 3.756061] random: fast init done [ 3.758304] random: crng init done [ 3.766001] diag: In __diag_glink_init, unable to register for glink channel DIAG_CTRL [ 3.766174] diag: In __diag_glink_init, unable to register for glink channel DIAG_DATA [ 3.773144] diag: In __diag_glink_init, unable to register for glink channel DIAG_CMD [ 3.780978] diag: In __diag_glink_init, unable to register for glink channel DIAG_DCI_DATA [ 3.788862] diag: In __diag_glink_init, unable to register for glink channel DIAG_DCI_CMD [ 3.800142] iommu: Adding device 1c40000.qcom,kgsl-iommu:gfx3d_user to group 3 [ 3.805361] platform 1c40000.qcom,kgsl-iommu:gfx3d_secure: assigned reserved memory node secure_region@0 [ 3.812533] iommu: Adding device 1c40000.qcom,kgsl-iommu:gfx3d_secure to group 4 [ 3.830966] brd: module loaded [ 3.834100] loop: module loaded [ 3.834425] zram: Added device: zram0 [ 3.836838] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1001000 [ 3.839876] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE[ 3.846309] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem [ 3.853922] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0 [ 3.860193] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1 [ 3.869648] i2c-msm-v2 7af5000.i2c: msm_bus_scale_register_client(mstr-id:84):0xc (ok) [ 3.872114] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1 [ 3.875594] qce 720000.qcedev: QTI Crypto 5.3.3 device found @0x720000 [ 3.875599] qce 720000.qcedev: CE device = 0x0 IO base, CE = ffffff8009440000 Consumer (IN) PIPE 2, [ 3.875599] Producer (OUT) PIPE 3 IO base BAM = 0000000000000000 [ 3.875599] BAM IRQ 65 Engines Availability = 0x2010853 [ 3.875897] sps:BAM 0x0000000000704000 is registered. [ 3.875897] sps:BAM 0x0000000000704000 (va:0xffffff80096a0000) enabled: ver:0x27, number of pipes:8 [ 3.876065] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000000704000 irq 65 [ 3.882842] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1 [ 3.883191] qcrypto 720000.qcrypto: QTI Crypto 5.3.3 device found @0x720000 [ 3.883196] qcrypto 720000.qcrypto: CE device = 0x0 IO base, CE = ffffff80097a0000 Consumer (IN) PIPE 4, [ 3.883196] Producer (OUT) PIPE 5 IO base BAM = 0000000000000000 [ 3.883196] BAM IRQ 65 Engines Availability = 0x2010853 [ 3.883456] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000000704000 irq 65 [ 3.887241] qcrypto 720000.qcrypto: qcrypto-ecb-aes [ 3.887346] qcrypto 720000.qcrypto: qcrypto-cbc-aes [ 3.887449] qcrypto 720000.qcrypto: qcrypto-ctr-aes [ 3.887544] qcrypto 720000.qcrypto: qcrypto-ecb-des [ 3.887632] qcrypto 720000.qcrypto: qcrypto-cbc-des [ 3.887729] qcrypto 720000.qcrypto: qcrypto-ecb-3des [ 3.887817] qcrypto 720000.qcrypto: qcrypto-cbc-3des [ 3.887905] qcrypto 720000.qcrypto: qcrypto-xts-aes [ 3.887993] qcrypto 720000.qcrypto: qcrypto-sha1 [ 3.888083] qcrypto 720000.qcrypto: qcrypto-sha256 [ 3.888172] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes [ 3.888259] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des [ 3.888348] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des [ 3.888442] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes [ 3.888529] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des [ 3.888616] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des [ 3.888704] qcrypto 720000.qcrypto: qcrypto-hmac-sha1 [ 3.888794] qcrypto 720000.qcrypto: qcrypto-hmac-sha256 [ 3.888885] qcrypto 720000.qcrypto: qcrypto-aes-ccm [ 3.888973] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm [ 3.889491] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed [ 3.889545] ICE IRQ = 118 [ 3.890086] SCSI Media Changer driver v0.25 [ 3.891078] libphy: Fixed MDIO Bus: probed [ 3.891081] tun: Universal TUN/TAP device driver, 1.6 [ 3.891082] tun: (C) 1999-2004 Max Krasnyansky [ 3.891118] PPP generic driver version 2.4.2 [ 3.891163] PPP BSD Compression module registered [ 3.891165] PPP Deflate Compression module registered [ 3.891180] PPP MPPE Compression module registered [ 3.891182] NET: Registered protocol family 24 [ 3.891288] usbcore: registered new interface driver asix [ 3.891330] usbcore: registered new interface driver ax88179_178a [ 3.891349] usbcore: registered new interface driver cdc_ether [ 3.891368] usbcore: registered new interface driver net1080 [ 3.891386] usbcore: registered new interface driver cdc_subset [ 3.891403] usbcore: registered new interface driver zaurus [ 3.891428] usbcore: registered new interface driver cdc_ncm [ 3.891430] CHRDEV "uio" major number 233 goes below the dynamic allocation range [ 3.892431] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 3.892433] hyp_assign_table: Failed to assign memory protection, ret = -5 [ 3.892438] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000f2f00000 size=1572864 err=-5 [ 3.892512] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs' [ 3.895440] msm-dwc3 7000000.ssusb: unable to get dbm device [ 3.896264] msm_sharedmem: sharedmem_register_qmi: qmi init successful [ 3.896287] CHRDEV "usbmon" major number 232 goes below the dynamic allocation range [ 3.896336] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.896338] ehci-platform: EHCI generic platform driver [ 3.896788] ehci-msm: Qualcomm On-Chip EHCI Host Controller [ 3.897612] usbcore: registered new interface driver cdc_acm [ 3.897613] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 3.897640] usbcore: registered new interface driver usb-storage [ 3.897657] usbcore: registered new interface driver ums-alauda [ 3.897673] usbcore: registered new interface driver ums-cypress [ 3.897691] usbcore: registered new interface driver ums-datafab [ 3.897707] usbcore: registered new interface driver ums-freecom [ 3.897723] usbcore: registered new interface driver ums-isd200 [ 3.897738] usbcore: registered new interface driver ums-jumpshot [ 3.897754] usbcore: registered new interface driver ums-karma [ 3.897769] usbcore: registered new interface driver ums-onetouch [ 3.897785] usbcore: registered new interface driver ums-sddr09 [ 3.897800] usbcore: registered new interface driver ums-sddr55 [ 3.897816] usbcore: registered new interface driver ums-usbat [ 3.897863] usbcore: registered new interface driver usbserial [ 3.897882] usbcore: registered new interface driver usb_ehset_test [ 3.897900] usbcore: registered new interface driver lvs [ 3.897925] CHRDEV "ttyGS" major number 231 goes below the dynamic allocation range [ 3.898903] CHRDEV "rmnet_ctrl" major number 230 goes below the dynamic allocation range [ 3.899289] mousedev: PS/2 mouse device common for all mice [ 3.899398] [touch][goodix_ts_init] enter [ 3.899706] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0xf (ok) [ 3.899899] [touch][goodix_ts_probe] enter 0x5d [ 3.899900] [goodix_parse_dt] enter [ 3.899907] [goodix_parse_dt] pdata->driver_send_cfg : 0 [ 3.899922] [goodix_parse_dt] 22,23,20,21,36 [ 3.899938] gtp_request_io_port -> set hub switch to low! [ 4.200063] gtp_request_io_port -> set wakeup state pin to high! [ 4.200121] Goodix-TS 3-005d: Regulator get failed avdd ret=-19 [ 4.200890] Goodix-TS 3-005d: Can not lookup pmx_ts_release pinstate -19 [ 4.201052] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0xc MSTR_STS:0x051363c8 OPER:0x00000010 [ 4.201068] check_ds927_exist 0x00 = 0x0 [ 4.341691] [gtp_read_fw_version] g_fw_ver:0x1060 [ 4.342500] [gtp_check_product_id] g_product_id:911 [ 4.343027] [gt9xx_read_vendor_id] g_vendor_id:0x0 [ 4.343826] [gt9xx_read_resolution] x_resolution:1280,y_resolution=480 [ 4.343827] [CheckTouchType] CHIP_GT9XX_PUBLIC default! [ 4.343828] [touch][goodix_ts_probe] 0 [ 4.343839] [gtp_request_input_dev] abs_x_max:1280,abs_y_max:480 [ 4.343931] input: Goodix-CTP as /devices/virtual/input/input1 [ 4.344218] Goodix-TS 3-005d: GTP works in interrupt mode. [ 4.344798] qcom,qpnp-rtc 200f000.qcom,spmi:qcom,pm8953@0:qcom,pm8953_rtc: rtc core: registered qpnp_rtc as rtc0 [ 4.345105] i2c /dev entries driver [ 4.348384] iommu: Adding device 1d00000.qcom,vidc:non_secure_cb to group 5 [ 4.348893] iommu: Adding device 1d00000.qcom,vidc:secure_bitstream_cb to group 6 [ 4.349262] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 4.349264] hyp_assign_table: Failed to assign memory protection, ret = -5 [ 4.349345] iommu: Adding device 1d00000.qcom,vidc:secure_pixel_cb to group 7 [ 4.349665] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 4.349667] hyp_assign_table: Failed to assign memory protection, ret = -5 [ 4.349746] iommu: Adding device 1d00000.qcom,vidc:secure_non_pixel_cb to group 8 [ 4.350075] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0 [ 4.350077] hyp_assign_table: Failed to assign memory protection, ret = -5 [ 4.354067] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 9 [ 4.354238] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 6, cb->name: :vfe sid [0] = 1024 [ 4.354238] , [ 4.354299] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 6, cb->name: :vfe sid [1] = 10240 [ 4.354299] , [ 4.354299] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb3 to group 10 [ 4.354455] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 3, cb->name: :cpp sid [0] = 7168 [ 4.354455] , [ 4.354456] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 11 [ 4.355767] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 3, cb->name: :jpeg_enc0 sid [0] = 6144 [ 4.355767] , [ 4.355768] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts [ 4.357546] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts [ 4.357712] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts [ 4.357821] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts [ 4.358316] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts [ 4.358450] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts [ 4.358577] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts [ 4.359043] msm_actuator_platform_probe:1987 msm_actuator_platform_probe: No/Error Actuator GPIOs [ 4.359106] msm_actuator_platform_probe:1987 msm_actuator_platform_probe: No/Error Actuator GPIOs [ 4.359611] msm_eeprom_platform_probe failed 1780 [ 4.359929] msm_eeprom_platform_probe qcom,i2c-freq-mode read fail. Setting to 0 -22 [ 4.446280] msm_cci_init:1442: hw_version = 0x10020005 [ 4.540049] msm_cci_wait: 306 wait for queue: 0 [ 4.640047] msm_cci_flush_queue:176 wait timeout [ 4.640071] msm_cci_transfer_end: 558 failed rc -110 [ 4.640073] msm_cci_data_queue: 816 failed rc -110 [ 4.640075] msm_camera_cci_i2c_write: line 134 rc = -110 [ 4.660045] read_eeprom_memory: page write failed [ 4.660047] msm_eeprom_platform_probe read_eeprom_memory failed [ 4.746318] qcom,eeprom: probe of 1b0c000.qcom,cci:qcom,eeprom@1 failed with error -110 [ 4.746491] msm_eeprom_platform_probe failed 1780 [ 4.751824] MSM-CPP cpp_init_hardware:1133 CPP HW Version: 0x40030003 [ 4.751829] MSM-CPP cpp_init_hardware:1151 stream_cnt:0 [ 4.751936] MSM-CPP cpp_release_hardware:1214 cpp hw release done [ 4.753540] CAM-SOC msm_camera_get_reg_base:870 err: mem resource vfe_fuse not found [ 4.753542] CAM-SOC msm_camera_get_res_size:913 err: mem resource vfe_fuse not found [ 4.753633] msm_vfe47_get_clks: cannot find camss_vfe_stream_clk [ 4.763842] CAM-SOC msm_camera_get_reg_base:870 err: mem resource vfe_fuse not found [ 4.763844] CAM-SOC msm_camera_get_res_size:913 err: mem resource vfe_fuse not found [ 4.763929] msm_vfe47_get_clks: cannot find camss_vfe_stream_clk [ 4.765361] __msm_jpeg_init:1551] Jpeg Device id 0 [ 4.765361] CHRDEV "jpeg0" major number 229 goes below the dynamic allocation range [ 4.768528] TYPEC: qpnp_typec_probe: TypeC successfully probed state=0 CC-line-state=2 [ 4.769955] thermal thermal_zone1: failed to read out thermal zone (-517) [ 4.793390] md: linear personality registered for level -1 [ 4.793482] device-mapper: uevent: version 1.0.3 [ 4.793625] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 4.793807] device-mapper: req-crypt: dm-req-crypt successfully initalized. [ 4.793807] [ 4.794402] CHRDEV "bt" major number 228 goes below the dynamic allocation range [ 4.794480] sdhci: Secure Digital Host Controller Interface driver [ 4.794480] sdhci: Copyright(c) Pierre Ossman [ 4.794481] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.796009] sdhci_msm 7824900.sdhci: failed opening nvmem cell err : -2 [ 4.796020] qcom_ice_get_pdevice: found ice device ffffffcd69d03400 [ 4.796021] qcom_ice_get_pdevice: matching platform device ffffffcd6c30b800 [ 4.797695] usbcore: registered new interface driver usbhid [ 4.797697] usbhid: USB HID core driver [ 4.797818] ashmem: initialized [ 4.798052] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm [ 4.799255] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff8009628000 [ 4.803764] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 64-bit ADMA in CMDQ mode [ 4.876419] mmc0: Out-of-interrupt timeout is 100[ms] [ 4.876422] mmc0: eMMC FW version: 0x01 [ 4.876424] mmc0: CMDQ supported: depth: 16 [ 4.876425] mmc0: cache barrier support 0 flush policy 0 [ 4.887301] cmdq_host_alloc_tdl: desc_size: 768 data_sz: 63488 slot-sz: 24 [ 4.887452] mmc0: CMDQ enabled on card [ 4.887462] mmc0: new HS400 Enhanced strobe MMC card at address 0001 [ 4.888959] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=-1 [ 4.888962] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=-1 [ 4.889063] mmcblk0: mmc0:0001 RP64MB 58.2 GiB [ 4.889243] mmcblk0rpmb: mmc0:0001 RP64MB partition 3 16.0 MiB [ 4.891084] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56 p57 p58 p59 p60 p61 [ 4.894323] tz_log 8600720.tz-log: Hyp log service is not supported [ 4.896252] sdhci_msm 7864900.sdhci: failed opening nvmem cell err : -2 [ 4.896259] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled [ 4.910565] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 64-bit ADMA in legacy mode [ 4.941461] IC works normally, Write 0x8040 0xAA [ 4.954197] gpio = 1278 [ 4.954207] vbus_det_irq = 88 [ 4.954213] usbid_gpio = 1 [ 4.954247] id_det_irq = 276 [ 4.954251] qcom,gpio-usbdetect soc:qcom,usb_detect: starting usb HOST [ 4.954758] -----enter Func: [ ext_attr_init ]------ [ 4.955147] [ ext_attr_probe ] enter [ 4.955165] [ ext_attr_probe ] leave [ 5.002445] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0x16 (ok) [ 5.002551] -----enter Func: [ icn6202_probe ]------ [ 5.005420] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001321c4 OPER:0x00000010 [ 5.005477] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 5.010991] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001321c4 OPER:0x00000010 [ 5.011003] Icn6202_mipi2lvds 2-002d: I2C retry times: 3 [ 5.017654] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x0d1300c8 OPER:0x00000010 [ 5.017665] TP0:I2C3: and TP1:i2c2 all no find chip! [ 5.017818] Icn6202_mipi2lvds: probe of 2-002d failed with error 1 [ 5.017849] -----leave Func: [ ext_attr_init ]------ [ 5.018249] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered. [ 5.049484] coresight-tmc 6028000.tmc: failed to get flush cti [ 5.049487] coresight-tmc 6028000.tmc: failed to get reset cti [ 5.049491] coresight-tmc 6028000.tmc: failed to get csr, defer probe [ 5.049598] coresight-tmc 6027000.tmc: failed to get flush cti [ 5.049600] coresight-tmc 6027000.tmc: failed to get reset cti [ 5.049602] coresight-tmc 6027000.tmc: failed to get csr, defer probe [ 5.051218] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized [ 5.051354] coresight-stm 6002000.stm: stm_register_device failed, probing deffered [ 5.051864] OF: graph: no port node found in /soc/cti@6010000 [ 5.051949] OF: graph: no port node found in /soc/cti@6011000 [ 5.052034] OF: graph: no port node found in /soc/cti@6012000 [ 5.052115] OF: graph: no port node found in /soc/cti@6013000 [ 5.052193] OF: graph: no port node found in /soc/cti@6014000 [ 5.052276] OF: graph: no port node found in /soc/cti@6015000 [ 5.052356] OF: graph: no port node found in /soc/cti@6016000 [ 5.052437] OF: graph: no port node found in /soc/cti@6017000 [ 5.052525] OF: graph: no port node found in /soc/cti@6018000 [ 5.052603] OF: graph: no port node found in /soc/cti@6019000 [ 5.052683] OF: graph: no port node found in /soc/cti@601a000 [ 5.052763] OF: graph: no port node found in /soc/cti@601b000 [ 5.052846] OF: graph: no port node found in /soc/cti@601c000 [ 5.052926] OF: graph: no port node found in /soc/cti@601d000 [ 5.053005] OF: graph: no port node found in /soc/cti@601e000 [ 5.053088] OF: graph: no port node found in /soc/cti@601f000 [ 5.053168] OF: graph: no port node found in /soc/cti@6198000 [ 5.053261] OF: graph: no port node found in /soc/cti@6199000 [ 5.053350] OF: graph: no port node found in /soc/cti@619a000 [ 5.053437] OF: graph: no port node found in /soc/cti@619b000 [ 5.053529] OF: graph: no port node found in /soc/cti@61b8000 [ 5.053623] OF: graph: no port node found in /soc/cti@61b9000 [ 5.053719] OF: graph: no port node found in /soc/cti@61ba000 [ 5.053817] OF: graph: no port node found in /soc/cti@61bb000 [ 5.053945] OF: graph: no port node found in /soc/cti@6128000 [ 5.054029] OF: graph: no port node found in /soc/cti@6124000 [ 5.054113] OF: graph: no port node found in /soc/cti@6134000 [ 5.054197] OF: graph: no port node found in /soc/cti@6139000 [ 5.054280] OF: graph: no port node found in /soc/cti@613c000 [ 5.054363] OF: graph: no port node found in /soc/cti@610c000 [ 5.054595] OF: graph: no port node found in /soc/csr@6001000 [ 5.054637] coresight-csr 6001000.csr: CSR initialized: coresight-csr [ 5.055166] OF: graph: no port node found in /soc/hwevent@6101000 [ 5.055216] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized [ 5.055921] CHRDEV "sensors" major number 227 goes below the dynamic allocation range [ 5.056488] gpio_clk soc:qcom,gpioclk: gpio_set_clocks_default: set clock rate: 10000 [ 5.056492] gpio_clk soc:qcom,gpioclk: gpio_clk_probe success [ 5.056541] proc create [ 5.056556] quec_devinfo init success! [ 5.056557] fulinux I am here [ 5.056670] usbcore: registered new interface driver snd-usb-audio [ 5.057285] u32 classifier [ 5.057286] Actions configured [ 5.057292] Netfilter messages via NETLINK v0.30. [ 5.057437] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 5.057582] ctnetlink v0.93: registering with nfnetlink. [ 5.057847] xt_time: kernel timezone is -0000 [ 5.057907] IPv4 over IPsec tunneling driver [ 5.058193] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.058338] arp_tables: arp_tables: (C) 2002 David S. Miller [ 5.058360] Initializing XFRM netlink socket [ 5.058556] NET: Registered protocol family 10 [ 5.059277] mip6: Mobile IPv6 [ 5.059289] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 5.059672] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.060179] NET: Registered protocol family 17 [ 5.060190] NET: Registered protocol family 15 [ 5.060206] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 5.060209] Ebtables v2.0 registered [ 5.060288] l2tp_core: L2TP core driver, V2.0 [ 5.060295] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 5.060296] l2tp_ip: L2TP IP encapsulation support (L2TPv3) [ 5.060307] l2tp_netlink: L2TP netlink interface [ 5.060330] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) [ 5.060331] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) [ 5.060419] sctp: Hash tables configured (bind 256/256) [ 5.061173] NET: Registered protocol family 27 [ 5.061388] spmi spmi-0: error: impermissible write to peripheral sid:0 addr:0xc441 [ 5.061393] qcom-spmi-gpio 200f000.qcom,spmi:qcom,pm8953@0:pinctrl@c000: write 0x41 failed [ 5.061397] adv_vreg: Failed to request enable GPIO1277: -19 [ 5.061400] reg-fixed-voltage soc:adv_vreg: Failed to register regulator: -19 [ 5.063940] minidump-id not found for adsp [ 5.065515] minidump-id not found for wcnss [ 5.065611] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped. [ 5.066081] minidump-id not found for modem [ 5.066350] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped. [ 5.066390] pil-q6v5-mss 4080000.qcom,mss: for md_modem segments only will be dumped. [ 5.070186] sps:BAM 0x0000000007104000 is registered. [ 5.070186] msm-dwc3 7000000.ssusb: Could not get usb power_supply [ 5.070370] CHRDEV "byte-cntr" major number 226 goes below the dynamic allocation range [ 5.071163] sps:BAM 0x0000000006044000 is registered. [ 5.071163] CHRDEV "6002000.stm" major number 225 goes below the dynamic allocation range [ 5.071282] coresight-stm 6002000.stm: STM32 initialized [ 5.076064] Registered cp15_barrier emulation handler [ 5.076080] Registered setend emulation handler [ 5.076315] registered taskstats version 1 [ 5.077642] qcom,cc-debug-8953 1874000.qcom,cc-debug: Registered Debug Mux successfully [ 5.080845] msm_smem 86300000.qcom,smem: for smem segments only will be dumped. [ 5.082764] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb to group 12 [ 5.083706] CHRDEV "adsprpc-smd" major number 224 goes below the dynamic allocation range [ 5.085033] input: soc:gpio_keys as /devices/platform/soc/soc:gpio_keys/input/input2 [ 5.088657] qcom,qpnp-rtc 200f000.qcom,spmi:qcom,pm8953@0:qcom,pm8953_rtc: setting system clock to 1970-01-01 00:06:01 UTC (361) [ 5.090369] lpm_levels_of: idx 1 276 [ 5.090374] lpm_levels_of: Residency < 0 for LPM [ 5.090464] lpm_levels_of: idx 1 286 [ 5.090467] lpm_levels_of: Residency < 0 for LPM [ 5.090620] lpm_levels: register_cluster_lpm_stats() [ 5.090768] lpm_levels: register_cluster_lpm_stats() [ 5.098619] rmnet_ipa started initialization [ 5.098621] IPA SSR support = True [ 5.098623] IPA ipa-loaduC = True [ 5.098624] IPA SG support = True [ 5.098625] IPA Napi Enable = False [ 5.098626] using default for wan-rx-desc-size = 1024 [ 5.120941] CHRDEV "wwan_ioctl" major number 223 goes below the dynamic allocation range [ 5.121541] ipa ipa_sps_irq_control_all:963 EP (5) not allocated. [ 5.121546] ipa ipa2_uc_state_check:302 uC is not loaded [ 5.123029] msm-dwc3 7000000.ssusb: DWC3 exited from low power mode [ 5.123771] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 5.123848] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 5.124205] xhci-hcd xhci-hcd.0.auto: hcc params 0x0230f665 hci version 0x100 quirks 0x02010010 [ 5.124217] xhci-hcd xhci-hcd.0.auto: irq 373, io mem 0x07000000 [ 5.124357] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.124360] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.124363] usb usb1: Product: xHCI Host Controller [ 5.124365] usb usb1: Manufacturer: Linux 4.9.112-perf xhci-hcd [ 5.124367] usb usb1: SerialNumber: xhci-hcd.0.auto [ 5.124597] hub 1-0:1.0: USB hub found [ 5.124620] hub 1-0:1.0: 1 port detected [ 5.124793] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 5.124855] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 5.124920] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.125009] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 5.125012] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.125014] usb usb2: Product: xHCI Host Controller [ 5.125016] usb usb2: Manufacturer: Linux 4.9.112-perf xhci-hcd [ 5.125018] usb usb2: SerialNumber: xhci-hcd.0.auto [ 5.125217] hub 2-0:1.0: USB hub found [ 5.125236] hub 2-0:1.0: 1 port detected [ 5.183472] rmnet_ipa completed initialization [ 5.183762] RNDIS_IPA module is loaded. [ 5.183762] clock_late_init: Removing enables held for handed-off clocks [ 5.255703] apc_mem_acc_corner: disabling [ 5.255705] gfx_mem_acc_corner: disabling [ 5.255720] ALSA device list: [ 5.255721] No soundcards found. [ 5.450044] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 5.600302] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101 [ 5.600305] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.600307] usb 1-1: Product: USB 2.0 Hub [ 5.605042] hub 1-1:1.0: USB[ 6.082295] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 6.082395] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 6.082586] spmi spmi-0: error: impermissible write to peripheral sid:0 addr:0xc141 [ 6.082589] qcom-spmi-gpio 200f000.qcom,spmi:qcom,pm8953@0:pinctrl@c000: write 0x41 failed [ 6.082592] nq-nci 5-0028: nqx_probe: cannot set direction for nfc clkreq gpio [1275] [ 6.082600] nq-nci 5-0028: nqx_probe: probing nqxx failed, check hardware [ 6.083660] Freeing unused kernel memory: 4096K [ 6.143077] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 6.147378] i2c 2-002d: I2C retry times: 3 [ 6.150210] init: init first stage started! [ 6.150230] init: First stage mount skipped (recovery mode) [ 6.150476] init: Using Android DT directory /proc/device-tree/firmware/android/ [ 6.177006] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 6.184482] TP0:I2C3: and TP1:i2c2 all no find chip! [ 6.206750] init: [libfs_mgr]Returning avb_handle with status: 0 [ 6.206966] init: Loading SELinux policy [ 6.334325] audit: type=1403 audit(362.739:2): policy loaded auid=4294967295 ses=4294967295 [ 6.334582] selinux: SELinux: Loaded policy from /sepolicy [ 6.334582] [ 6.341640] init: global_bootmode [ 6.353021] selinux: SELinux: Loaded file_contexts [ 6.353021] [ 6.356227] init: init second stage started! [ 6.381232] init: Using Android DT directory /proc/device-tree/firmware/android/ [ 6.386417] selinux: SELinux: Loaded file_contexts [ 6.386417] [ 6.387704] init: Running restorecon... [ 6.409230] init: waitid failed: No child processes [ 6.409325] init: Couldn't load property file '/system/etc/prop.default': open() failed: No such file or directory: No such file or directory [ 6.413929] init: Unable to set property 'ro.adb.secure' to '1' in property file '/prop.default': Read-only property was already set [ 6.428122] init: Unable to set property 'ro.cutoff_voltage_mv' to '3400' in property file '/prop.default': Read-only property was already set [ 6.438024] init: Unable to set property 'ro.product.first_api_level' to '28' in property file '/prop.default': Read-only property was already set [ 6.451538] init: Unable to set property 'ro.af.client_heap_size_kbyte' to '7168' in property file '/prop.default': Read-only property was already set [ 6.467661] audit: type=1400 audit(362.869:3): avc: denied { create } for pid=1 comm="init" name="cgroup.procs" scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1 [ 6.471018] ueventd: ueventd started! [ 6.475490] selinux: SELinux: Loaded file_contexts [ 6.475490] [ 6.475750] ueventd: Parsing file /ueventd.rc... [ 6.476281] ueventd: Parsing file /vendor/ueventd.rc... [ 6.476307] ueventd: Unable to read config file '/vendor/ueventd.rc': open() failed: No such file or directory [ 6.476321] ueventd: Parsing file /odm/ueventd.rc... [ 6.476339] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory [ 6.476353] ueventd: Parsing file /ueventd.qcom.rc... [ 6.476377] ueventd: Unable to read config file '/ueventd.qcom.rc': open() failed: No such file or directory [ 6.543378] audit: type=1400 audit(362.949:4): avc: denied { write } for pid=1 comm="init" path="/acct/uid_0/pid_363/cgroup.procs" dev="rootfs" ino=6780 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1 [ 6.960827] IC works normally, Write 0x8040 0xAA [ 6.963905] msm-dwc3 7000000.ssusb: DWC3 in low power mode [ 7.200248] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 7.200492] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 7.215148] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 7.230532] i2c 2-002d: I2C retry times: 3 [ 7.246317] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 7.250297] TP0:I2C3: and TP1:i2c2 all no find chip! [ 7.940645] ueventd: Coldboot took 1.463 seconds [ 7.948339] audit: type=1400 audit(364.349:5): avc: denied { setattr } for pid=1 comm="init" name="system" dev="rootfs" ino=15400 scontext=u:r:init:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1 [ 7.955897] file system registered [ 7.972178] audit: type=1400 audit(364.379:6): avc: denied { add_name } for pid=1 comm="init" name="enable" scontext=u:r:init:s0 tcontext=u:object_r:sysfs_android_usb:s0 tclass=dir permissive=1 [ 7.972454] audit: type=1400 audit(364.379:7): avc: denied { create } for pid=1 comm="init" name="enable" scontext=u:r:init:s0 tcontext=u:object_r:sysfs_android_usb:s0 tclass=file permissive=1 [ 7.998484] audit: type=1400 audit(364.399:8): avc: denied { read } for pid=373 comm="charger" name="type" dev="sysfs" ino=34690 scontext=u:r:charger:s0 tcontext=u:object_r:sysfs_battery_supply:s0 tclass=file permissive=1 [ 8.002709] audit: type=1400 audit(364.409:9): avc: denied { append } for pid=376 comm="recovery" name="ttyHSL0" dev="tmpfs" ino=4435 scontext=u:r:recovery:s0 tcontext=u:object_r:console_device:s0 tclass=chr_file permissive=1 [ 8.002732] audit: type=1400 audit(364.409:10): avc: denied { open } for pid=376 comm="recovery" path="/dev/ttyHSL0" dev="tmpfs" ino=4435 scontext=u:r:recovery:s0 tcontext=u:object_r:console_device:s0 tclass=chr_file permissive=1 [ 8.004052] audit: type=1400 audit(364.409:11): avc: denied { setcurrent } for pid=375 comm="adbd" scontext=u:r:adbd:s0 tcontext=u:r:adbd:s0 tclass=process permissive=1 [ 8.007881] read descriptors [ 0.003444] Starting recovery (pid 374) on Thu Jan 1 00:06:0[ 8.007968] read strings 4 1970 [ 0.064240] recovery filesystem table [ 0.090392] ========================= [ 0.090416] 0 /vendor ext4 /dev/block/platform/soc/7824900.sdhci/by-name/vendor_b 0 [ 0.090425] 1 / ext4 /dev/block/bootdevice/by-name/system_b 0 [ 0.090434] 2 / ext4 /dev/block/bootdevice/by-name/vendor_b 0 [ 0.090442] 3 /data ext4 /dev/block/bootdevice/by-name/userdata -16384 [ 0.090451] 4 /sdcard vfat /dev/block/mmcblk1p1 0 [ 0.090459] 5 /boot emmc /dev/block/boot[ 8.090527] healthd: No battery devices found [ 8.090867] healthd: battery l=80 v=4000 t=25.0 h=2 st=3 chg= [ 8.131355] [goodix_ts_suspend] enter donothing [ 8.131355] device/by-name/boot 0 [ 0.090468] 6 /misc emmc /dev/block/[ 8.147007] [mdss_dsi_request_gpios] gpio_request disp_rst_n suc [ 8.148502] mdss_dsi_pinctrl_gpio_init: mdss_dsi_pinctrl_gpio_init: failed to get pinctrl [ 8.148990] [goodix_ts_resume] enter bootdevice/by-name/misc 0 [ 0.090476] 7 /tmp ramdisk ramdisk 0 [ 0.090484] [ 0.090503] I:Boot command: boot-recovery [ 0.090513] I:Got 4 arguments from boot message [ 0.090521] locale is [en_US] [ 0.090529] stage is [] [ 0.090537] reason is [RescueParty] [ 0.090544] I:Brightness: 127 (50%) [ 0.090552] cannot find/open a drm device: No such file or directory [ 0.090560] fb0 reports (possibly inaccurate): [ 0.090568] vi.bits_per_pixel = 32 [ 0.090576] vi.red.offset = 0 .length = 8 [ 0.090584] vi.green.offset = 8 .length = 8 [ 0.090592] vi.blue.offset = 16 .length = 8 [ 0.090599] framebuffer: 0 (1280 x 480) [ 0.201749] erasing_text: en_US (91 x 38 @ 1248) [ 0.204561] no_command_text: en_US (166 x 38 @ 1248) [ 0.208563] error_text: en_US (66 x 38 @ 1248) [ 8.321117] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 8.321363] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 8.335935] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 8.351365] i2c 2-002d: I2C retry times: 3 [ 8.367176] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 8.371162] TP0:I2C3: and TP1:i2c2 all no find chip! [ 0.620228] installing_text: en_US (304 x 38 @ 1446) [ 0.651674] SELinux: Loaded file_contexts [ 0.651873] Command: "/sbin/recovery" "--prompt_and_wipe_data" "--reason=RescueParty" "--locale=en_US" [ 0.651902] [ 0.655132] persist.vendor.btstack.enable.splita2dp=false [ 0.655164] persist.vendor.service.bt.hfp.client=true [ 0.655193] persist.vendor.service.bt.a2dp.sink=true [ 0.655221] bluetooth.hfp.client=1 [ 0.655345] ro.boottime.adbd=7998960881 [[ 8.685216] boot_mode_show:1 0.655375] ro.boottime.init=6086 [ 0.655404] ro.boottime.init.selinux=141 [ 0.655432] ro.boottime.init.cold_boot_wait=1390 [ 0.655460] ro.boottime.charger=7995741975 [ 0.655488] ro.boottime.ueventd=6467411298 [ 0.655515] ro.boottime.recovery=7996735985 [ 0.655600] ro.vendor.qti.sys.fw.bservice_age=5000 [ 0.655630] ro.vendor.qti.sys.fw.bservice_limit=5 [ 0.655658] ro.vendor.qti.sys.fw.bservice_enable=true [ 0.655742] persist.vendor.cne.feature=1 [ 0.657275] dalvik.vm.dex2oat-minidebuginfo=true [ 0.660314] debug.sf.hw=0 [ 0.660332] debug.sf.recomputecrop=0 [ 0.660344] debug.sf.enable_hwc_vds=1 [ 0.660355] debug.sf.latch_unsignaled=1 [ 0.660367] debug.egl.hw=0 [ 0.660379] debug.atrace.tags.enableflags=0 [ 0.660391] debug.enable.sglscale=1 [ 0.660402] debug.gralloc.enable_fb_ubwc=1 [ 0.660414] debug.mdpcomp.logs=0 [ 0.660425] av.debug.disable.pers.cache=1 [ 0.660437] mm.enable.smoothstreaming=true [ 0.660448] ro.fm.transmitter=false [ 0.660460] ro.ui.style_q=true [ 0.660471] ro.com.google.gmsversion=9_201906 [ 0.660483] ro.opa.eligible_device=true [ 0.660494] ro.boot.emmc=true [ 0.660506] ro.boot.flash.locked=0 [ 0.660517] ro.boot.vbmeta.size=4992 [ 0.660529] ro.boot.vbmeta.digest=cf4f8674d30d74b7e0f1d2cc9b9ebaac10338a250b89a0e2833ef2ea38b0f528 [ 0.660541] ro.boot.vbmeta.hash_alg=sha256 [ 0.660553] ro.boot.vbmeta.device_state=unlocked [ 0.660564] ro.boot.ckxmode=recovery [ 0.660576] ro.boot.dtbo_idx=7 [ 0.660587] ro.boot.usbconfigfs=true [ 0.660598] ro.hwui.path_cache_size=32 [ 0.660610] ro.hwui.layer_cache_size=48 [ 0.660621] ro.hwui.texture_cache_size=72 [ 0.660633] ro.hwui.gradient_cache_size=1 [ 0.660644] ro.hwui.r_buffer_cache_size=8 [ 0.660655] ro.hwui.drop_shadow_cache_size=6 [ 0.660667] ro.hwui.text_large_cache_width=2048 [ 0.660678] ro.hwui.text_small_cache_width=1024 [ 0.660690] ro.hwui.text_large_cache_height=1024 [ 0.660701] ro.hwui.text_small_cache_height=1024 [ 0.660713] ro.hwui.texture_cache_flushrate=0.4 [ 0.660724] ro.wifi.channels= [ 0.660736] ro.allow.mock.location=0 [ 0.660747] ro.build.zhtd.oem=audi [ 0.660759] ro.build.flavor=msm8953_64-user [ 0.660770] ro.build.version.all_codenames=REL [ 0.660782] ro.build.version.min_supported_target_sdk=17 [ 0.660793] ro.build.ab_update=true [ 0.660805] ro.build.characteristics=device [ 0.660816] ro.treble.enabled=true [ 0.660828] ro.memperf.lib=libmemperf.so [ 0.660839] ro.memperf.enable=false [ 0.660850] ro.product.locale=en-US [ 0.660862] ro.release.sys_version=7.5 [ 0.660873] ro.bootfast=true [ 0.660885] ro.location.osnlp.region.package= [ 0.660896] ro.location.osnlp.package=com.google.android.gms [ 0.660908] ro.qualcomm.cabl=2 [ 0.660919] ro.bluetooth.library_name=libbluetooth_qti.so [ 0.660930] ro.emmc_size=16GB [ 0.660942] ro.sdkversion=20190305 [ 0.660953] ro.setupwizard.mode=OPTIONAL [ 0.660964] ro.quec_code_branch=SC600 [ 0.660976] ro.cutoff_voltage_mv=3400 [ 0.660987] ro.quec_[ 8.964414] IC works normally, Write 0x8040 0xAA code_project=SC60_Android9_R05_r000120 [ 0.660999] ro.actionable_compatible_property.enabled=true [ 0.661010] mmp.enable.3g2=true [ 0.661022] sdm.debug.disable_skip_validate=1 [ 0.661033] init.svc.adbd=running [ 0.661044] init.svc.charger=running [ 0.661056] init.svc.ueventd=running [ 0.661067] init.svc.recovery=running [ 0.661078] qemu.hw.mainkeys=1 [ 0.661090] rild.libargs=-d /dev/smd0 [ 0.661101] rild.libpath=/vendor/lib64/libril-qc-qmi-1.so [ 0.661113] vidc.enc.dcvs.extra-buff-count=2 [ 0.661124] audio.offload.min.duration.secs=30 [ 0.661135] media.settings.xml=/vendor/etc/media_profiles_vendor.xml [ 0.661147] media.msm8956hw=0 [ 1.004168] media.aac_51_output_enabled=true [ 1.004198] persist.mm.sta.enable=0 [ 1.004209] persist.hwc.mdpcomp.enable=true [ 1.004219] persist.hwc.enable_vds=1 [ 1.004228] persist.qfp=false [ 1.004238] persist.data.netmgrd.qos.enable=true [ 1.004247] persist.demo.hdmirotates=true [ 1.004257] persist.demo.hdmirotationlock=false [ 1.004266] persist.rild.nitz_plmn= [ 1.004276] persist.rild.nitz_long_ons_0= [ 1.004285] persist.rild.nitz_long_ons_1= [ 1.004295] persist.rild.nitz_long_ons_2= [ 1.004304] persist.rild.nitz_long_ons_3= [ 1.004314] persist.rild.nitz_short_ons_0= [ 1.004323] persist.rild.nitz_short_ons_1= [ 1.004333] persist.rild.nitz_short_ons_2= [ 1.004342] persist.rild.nitz_short_ons_3= [ 1.004351] persist.timed.enable=true [ 1.004361] persist.backup.ntpServer=0.pool.ntp.org [ 1.004370] persist.fuse_sdcard=true [ 1.004380] setupwizard.feature.predeferred_enabled=false [ 1.004390] DEVICE_PROVISIONED=1 [ 1.004400] ro.config.ringtone=Ring_Synth_04.ogg [ 1.004410] ro.config.alarm_alert=Alarm_Classic.ogg [ 1.004419] ro.config.notification_sound=pixiedust.ogg [ 1.004429] ro.boot.vbmeta.avb_version=1.0 [ 1.004438] ro.boot.console=ttyHSL0 [ 1.004448] ro.boot.baseband=msm [ 1.004457] ro.boot.hardware=qcom [ 1.004466] ro.boot.keymaster=1 [ 1.004476] ro.boot.bootdevice=7824900.sdhci [ 1.004485] ro.boot.veritymode=enforcing [ 1.004495] ro.boot.avb_version=1.1 [ 1.004504] ro.boot.verifiedbootstate=orange [ 1.004514] ro.build.id=PKQ1.181105.001 [ 1.004523] ro.build.date=Fri Nov 11 13:53:02 CST 2022 [ 1.004533] ro.build.date.utc=1668145982 [ 1.004542] ro.build.host=carocean-PowerEdge-R540 [ 1.004552] ro.build.tags=test-keys [ 1.004561] ro.build.type=user [ 1.004570] ro.build.user=android20 [ 1.004580] ro.build.display.id=PKQ1.181105.001 test-keys [ 1.004589] ro.build.product=msm8953_64 [ 1.004599] ro.build.version.sdk=28 [ 1.004608] ro.build.version.base_os= [ 1.004618] ro.build.version.release=9 [ 1.004627] ro.build.version.codename=REL [ 1.004636] ro.build.version.incremental=eng.android.20221111.135811 [ 1.004646] ro.build.version.preview_sdk=0 [ 1.004656] ro.build.version.security_patch=2022-03-05 [ 1.004666] ro.build.description=msm8953_64-user 9 PKQ1.181105.001 eng.android.20221111.135811 test-keys [ 1.004676] ro.build.system_root_image=true [ 1.004686] ro.product.cpu.abi=arm64-v8a [ 1.004695] ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi [ 1.004705] ro.product.name=msm8953_64 [ 1.004714] ro.product.brand=Android [ 1.004724] ro.product.model=msm8953 for arm64 [ 1.004733] ro.product.device=msm8953_64 [ 1.004743] ro.product.manufacturer=QUALCOMM [ 1.004752] ro.baseband=msm [ 1.004762] ro.bootmode=unknown [ 1.004785] ro.hardware=qcom [ 1.004795] ro.revision=0 [ 1.004805] ro.bootimage.build.date=Fri Nov 11 13:53:02 CST 2022 [ 1.004814] ro.bootimage.build.date.utc=1668145982 [ 1.004824] ro.bootimage.build.fingerprint=Android/msm8953_64/msm8953_64:9/PKQ1.181105.001/android2011111353:user/test-keys [ 1.004834] ro.bootloader=unknown [ 1.004843] ro.debuggable=1 [ 1.004853] ro.property_service.version=2 [ 1.004862] sys.usb.controller=7000000.dwc3 [ 1.004872] persist.sys.dalvik.vm.lib.2=libart.so [ 1.004881] af.fast_track_multiplier=1 [ 1.004890] ro.af.client_heap_size_kbyte=7168 [ 1.004900] ro.com.android.dataroaming=true [ 1.004909] ro.boot.wificountrycode=US [ 1.004919] ro.zygote=zygote64_32 [ 1.004928] ro.opengles.version=196610 [ 1.004937] ro.telephony.default_network=22,20 [ 1.004947] ro.oem_unlock_supported=1 [ 1.004956] drm.service.enabled=true [ 1.004965] audio.offload.video=true [ 1.337518] audio.deep_buffer.media=true [ 1.337534] keyguard.no_require_sim=true [ 1.337546] telephony.lteOnCdmaDevice=1 [ 1.337557] persist.radio.multisim.config=dsds [ 1.337569] ro.dalvik.vm.native.bridge=0 [ 1.337581] dalvik.vm.isa.arm.variant=cortex-a53 [ 1.337592] dalvik.vm.isa.arm.features=default [ 1.337610] dalvik.vm.isa.arm64.variant=generic [ 1.337622] dalvik.vm.isa.arm64.features=default [ 1.337634] dalvik.vm.dexopt.secondary=true [ 1.337645] dalvik.vm.usejit=true [ 1.337657] dalvik.vm.heapsize=512m [ 1.337668] dalvik.vm.dex2oat-Xms=64m [ 1.337679] dalvik.vm.dex2oat-Xmx=512m [ 1.337691] dalvik.vm.heapmaxfree=8m [ 1.337702] dalvik.vm.heapminfree=4m [ 1.337713] dalvik.vm.heapstartsize=16m [ 1.337725] dalvik.vm.appimageformat=lz4 [ 1.337736] dalvik.vm.usejitprofiles=true [ 9.441022] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 9.445789] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 9.461459] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 9.476993] i2c 2-002d: I2C retry times: 3 [ 9.492726] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 9.496761] TP0:I2C3: and TP1:i2c2 all no find chip! [ 1.337748] dalvik.vm.heapgrowthlimit=192m [ 1.337759] dalvik.vm.stack-trace-dir=/data/anr [ 1.337771] dalvik.vm.image-dex2oat-Xms=64m [ 1.337782] dalvik.vm.image-dex2oat-Xmx=64m [ 1.337793] dalvik.vm.heaptargetutilization=0.75 [ 1.337805] ro.frp.pst=/dev/block/bootdevice/by-name/config [ 1.337816] ro.boot.slot_suffix=_b [ 1.337828] ro.vndk.version=28 [ 1.337839] ro.board.platform=msm8953 [ 1.337850] ro.vendor.build.date=Fri Nov 11 13:53:02 CST 2022 [ 1.337862] ro.vendor.build.date.utc=1668145982 [ 1.337874] ro.vendor.build.fingerprint=Android/msm8953_64/msm8953_64:9/PKQ1.181105.001/android2011111353:user/test-keys [ 1.337886] ro.carrier=unknown [ 1.337897] ro.product.cpu.abilist32=armeabi-v7a,armeabi [ 1.337909] ro.product.cpu.abilist64=arm64-v8a [ 1.337920] ro.product.board=msm8953 [ 1.337932] ro.product.vendor.name=msm8953_64 [ 1.337943] ro.product.vendor.brand=Android [ 1.337954] ro.product.vendor.model=msm8953 for arm64 [ 1.337966] ro.product.vendor.device=msm8953_64 [ 1.337977] ro.product.vendor.manufacturer=QUALCOMM [ 1.337989] ro.product.first_api_level=28 [ 1.338000] ro.hardware.nfc_nci=nqx.default [ 1.338012] ro.hardware.keystore_desede=true [ 1.338024] ro.build.fingerprint=Android/msm8953_64/msm8953_64:9/PKQ1.181105.001/android2011111353:user/test-keys [ 1.338036] pm.dexopt.boot=verify [ 1.338047] pm.dexopt.ab-ota=speed-profile [ 1.338059] pm.dexopt.shared=speed [ 1.338070] pm.dexopt.install=speed-profile [ 1.338081] pm.dexopt.inactive=verify [ 1.338093] pm.dexopt.bg-dexopt=speed-profile [ 1.338104] pm.dexopt.first-boot=quicken [ 1.338116] ro.adb.secure=1 [ 1.338127] ro.secure=0 [ 1.338138] sys.usb.configfs=1 [ 1.338149] sys.usb.ffs.ready=1 [ 1.338161] vendor.hw.fm.init=0 [ 1.338172] log.tag.stats_log=I [ 1.338183] ro.logd.size.stats=64K [ 1.338194] vendor.mm.enable.qcom_parser=1048575 [ 1.338206] vendor.video.disable.ubwc=1 [ 1.338217] persist.debug.wfd.enable=1 [ 1.338228] persist.debug.coresight.config=stm-events [ 1.338240] ro.boot.pmi632exist=false [ 1.338251] ro.build.quectelversion.release=01.001V01 [ 1.338263] ril.subscription.types=NV,RUIM [ 1.338274] ro.vendor.qti.am.reschedule_service=true [ 1.338286] ro.boot.serialno=fbcfe425 [ 1.338297] ro.serialno=fbcfe425 [ 1.338308] security.perf_harden=1 [ 1.338319] dev.pm.dyn_samplingrate=1 [ 1.338330] net.bt.name=Android [ 1.338342] sys.vendor.shutdown.waittime=500 [ 1.338353] persist.sys.usb.config=diag,serial_cdev,rmnet,adb [ 1.338365] ro.vendor.qti.sys.fw.empty_app_percent=50 [ 1.338376] ro.vendor.qti.sys.fw.use_trim_settings=true [ 1.338388] ro.vendor.qti.sys.fw.trim_cache_percent=100 [ 1.338399] ro.vendor.qti.sys.fw.trim_empty_percent=100 [ 1.338410] ro.vendor.qti.sys.fw.trim_enable_memory=2147483648 [ 1.742553] ro.vendor.audio.sdk.ssr=false [ 1.742573] ro.vendor.audio.sdk.fluencetype=none [ 1.742586] vendor.audio.hw.aac.encoder=true [ 1.742598] vendor.audio.pp.asphere.enabled=false [ 1.742610] vendor.audio.use.sw.ape.decoder=true [ 1.742622] vendor.audio.use.sw.alac.decoder=true [ 1.742634] vendor.audio.flac.sw.decoder.24bit=true [ 1.742645] vendor.audio.safx.pbe.enabled=true [ 1.742657] vendor.audio.dolby.ds2.enabled=false [ 1.742668] vendor.audio.dolby.ds2.hardbypass=false [ 1.742680] vendor.audio.parser.ip.buffer.size=262144 [ 1.742691] vendor.audio.tunnel.encode=false [ 1.742703] vendor.audio.offload.track.enable=true [ 1.742714] vendor.audio.offload.buffer.size.kb=64 [ 1.742726] vendor.audio.offload.gapless.enabled=true [ 1.742737] vendor.audio.offload.multiaac.enable=true [ 1.742749] vendor.audio.offload.multiple.enabled=false [ 1.742761] vendor.audio.offload.passthrough=false [ 1.742772] vendor.audio.playback.mch.downsample=true [ 1.742783] vendor.voice.conc.fallbackpath=deep-buffer [ 1.742795] vendor.voice.path.for.pcm.voip=true [ 1.742806] vendor.voice.voip.conc.disabled=true [ 1.742830] vendor.voice.record.conc.disabled=false [ 1.742843] vendor.voice.playback.conc.disabled=true [ 1.742854] persist.vendor.audio.hw.binder.size_kbyte=1024 [ 1.742866] persist.vendor.audio.fluence.speaker=true [ 1.742877] persist.vendor.audio.fluence.voicerec=false [ 1.742889] persist.vendor.audio.fluence.voicecall=true [ 1.742900] persist.vendor.audio.speaker.prot.enable=false [ 1.742912] vendor.camera.aux.packagelist=org.codeaurora.snapcam,com.android.dialer,com.android.phone [ 1.742924] ro.vendor.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi [ 1.742936] ro.vendor.product.cpu.abilist32=armeabi-v7a,armeabi [ 1.742948] ro.vendor.product.cpu.abilist64=arm64-v8a [ 1.742959] ro.vendor.gt_library=libqti-gt.so [ 1.742971] ro.vendor.use_data_netmgrd=true [ 1.742982] ro.vendor.extension_library=libqti-perfd-client.so [ 1.742994] vendor.vidc.dec.downscalar_width=1920 [ 1.743005] vendor.vidc.dec.downscalar_height=1088 [ 1.743017] vendor.vidc.enc.disable.pq=true [ 1.743028] vendor.vidc.enc.disable_bframes=1 [ 1.743040] vendor.vidc.disable.split.mode=1 [ 1.743051] vendor.debug.enable.gamed=0 [ 1.743063] vendor.camera.hal1.packagelist=com.skype.raider,com.google.android.talk [ 1.743074] vendor.camera.lowpower.record.enable=1 [ 1.743086] vendor.audio_hal.period_size=192 [ 1.743097] persist.vendor.ntp.svr_2=cn.ntp.org.cn [ 1.743109] persist.vendor.data.mode=concurrent [ 1.743120] persist.vendor.camera.display.lmax=1280x720 [ 1.743132] persist.vendor.camera.display.umax=1920x1080 [ 1.743143] persist.vendor.qcomsysd.enabled=1 [ 1.743155] persist.vendor.bluetooth.modem_nv_support=true [ 1.743166] ro.vendor.display.cabl=2 [ 1.743178] vendor.display.disable_skip_validate=1 [ 1.743194] vendor.display.enable_default_color_mode=1 [ 1.743205] vendor.gralloc.enable_fb_ubwc=1 [ 1.743217] ro.vendor.qti.core_ctl_max_cpu=4 [ 1.743228] ro.vendor.qti.core_ctl_min_cpu=2 [ 1.743239] ro.vendor.at_library=libqti-at.so [ 1.743251] persist.vendor.radio.rat_on=combine [ 1.743262] persist.vendor.radio.custom_ecc=1 [ 1.743274] persist.vendor.radio.sib16_support=1 [ 1.743285] persist.vendor.radio.apm_sim_not_pwdn=1 [ 1.743296] vendor.rild.libpath=/vendor/lib64/libril-qc-qmi-1.so [ 1.743308] ro.vendor.build.security_patch=2018-06-05 [ 1.743320] [ 1.743331] Supported API: 3 [ 1.743342] /sys/ext_attr/boot_mode : recovery [ 10.561074] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 10.561310] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 10.575758] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 10.591323] i2c 2-002d: I2C retry times: 3 [ 10.607039] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 10.611101] TP0:I2C3: and TP1:i2c2 all no find chip! [ 10.961612] IC works normally, Write 0x8040 0xAA [ 11.681004] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 11.681240] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 11.695673] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 11.711254] i2c 2-002d: I2C retry times: 3 [ 11.726965] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 11.731033] TP0:I2C3: and TP1:i2c2 all no find chip! [ 12.825705] i2c-msm-v2 78b6000.i2c: error timeout on polling for valid state. check core_clk [ 12.825889] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 12.833429] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 12.848782] i2c 2-002d: I2C retry times: 3 [ 12.864476] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 12.868502] TP0:I2C3: and TP1:i2c2 all no find chip! [ 12.960766] IC works normally, Write 0x8040 0xAA [ 13.921000] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 13.921233] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 13.935667] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 13.951235] i2c 2-002d: I2C retry times: 3 [ 13.966958] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 13.971026] TP0:I2C3: and TP1:i2c2 all no find chip! [ 14.961638] IC works normally, Write 0x8040 0xAA [ 15.040214] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 15.040445] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 15.054881] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 15.070464] i2c 2-002d: I2C retry times: 3 [ 15.086151] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 15.090239] TP0:I2C3: and TP1:i2c2 all no find chip! [ 16.161000] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 16.161233] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 16.175668] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 16.191234] i2c 2-002d: I2C retry times: 3 [ 16.206959] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 16.211027] TP0:I2C3: and TP1:i2c2 all no find chip! [ 16.961619] IC works normally, Write 0x8040 0xAA [ 17.281056] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 17.281288] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 17.295720] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 17.311307] i2c 2-002d: I2C retry times: 3 [ 17.327000] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 17.331084] TP0:I2C3: and TP1:i2c2 all no find chip! [ 18.400992] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 18.401225] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 18.415660] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 18.431225] i2c 2-002d: I2C retry times: 3 [ 18.446952] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 18.451017] TP0:I2C3: and TP1:i2c2 all no find chip! [ 18.961681] IC works normally, Write 0x8040 0xAA [ 19.521056] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 19.521290] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 19.535724] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 19.551306] i2c 2-002d: I2C retry times: 3 [ 19.567004] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 19.571084] TP0:I2C3: and TP1:i2c2 all no find chip! [ 20.640995] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 20.641229] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 20.655664] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 20.671230] i2c 2-002d: I2C retry times: 3 [ 20.686939] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 20.691024] TP0:I2C3: and TP1:i2c2 all no find chip! [ 20.961664] IC works normally, Write 0x8040 0xAA [ 21.761064] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 21.761298] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 21.775731] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 21.791314] i2c 2-002d: I2C retry times: 3 [ 21.807009] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 21.811092] TP0:I2C3: and TP1:i2c2 all no find chip! [ 22.880989] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 22.881222] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 22.895658] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 22.911225] i2c 2-002d: I2C retry times: 3 [ 22.926948] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 22.931015] TP0:I2C3: and TP1:i2c2 all no find chip! [ 22.960750] IC works normally, Write 0x8040 0xAA [ 24.001074] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 24.001306] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 24.015742] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 24.031323] i2c 2-002d: I2C retry times: 3 [ 24.047019] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 24.051103] TP0:I2C3: and TP1:i2c2 all no find chip! [ 24.961622] IC works normally, Write 0x8040 0xAA [ 25.120168] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 25.120400] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 25.134836] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 25.150403] i2c 2-002d: I2C retry times: 3 [ 25.166105] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 25.170194] TP0:I2C3: and TP1:i2c2 all no find chip! [ 26.241053] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 26.241285] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 26.255720] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 26.271301] i2c 2-002d: I2C retry times: 3 [ 26.287013] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 26.291080] TP0:I2C3: and TP1:i2c2 all no find chip! [ 26.961621] IC works normally, Write 0x8040 0xAA [ 27.361001] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 27.361234] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000000 [ 27.375688] i2c-msm-v2 78b6000.i2c: BUS ERROR:noisy bus/unexpected start/stop tag: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x001121c4 OPER:0x00000010 [ 27.391224] i2c 2-002d: I2C retry times: 3 [ 27.406968] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x2d MSTR_STS:0x011363c8 OPER:0x00000010 [ 27.411029] TP0:I2C3: and TP1:i2c2 all no find chip! [ 28.961628] IC works normally, Write 0x8040 0xAA [ 30.961628] IC works normally, Write 0x8040 0xAA [ 32.961690] IC works normally, Write 0x8040 0xAA [ 34.961683] IC works normally, Write 0x8040 0xAA [ 36.961684] IC works normally, Write 0x8040 0xAA [ 38.961628] IC works normally, Write 0x8040 0xAA [ 40.961593] IC works normally, Write 0x8040 0xAA [ 42.313639] recovery: 0,0,0,0 (0,0) - > (220,42) [ 42.313688] (0, 0) [ 42.329010] recovery: 0,0,0,0 (220,42) - > (220,42) [ 42.329060] (0, 0) [ 42.345287] recovery: 0,0,0,0 (220,42) - > (220,42) [ 42.345337] (0, 0) [ 42.361370] recovery: 0,0,0,0 (220,42) - > (220,42) [ 42.361420] (0, 0) [ 42.377705] recovery: 0,0,0,0 (220,42) - > (220,42) [ 42.377755] (0, 0) [ 42.393889] recovery: 0,0,0,0 (220,42) - > (220,42) [ 42.393939] (0, 0) [ 42.410071] recovery: 0,0,0,0 (220,42) - > (220,42) [ 42.410121] (0, 0) [ 42.426269] recovery: 0,0,0,0 (220,42) - > (220,42) [ 42.426318] (0, 0) [ 42.442379] recovery: 0,0,0,0 (220,42) - > (220,42) [ 42.442429] (0, 0) [ 42.458356] recovery: 0,0,0,0 (220,42) - > (220,42) [ 42.458406] (0, 0) [ 42.474538] recovery : gtp_touch_up [ 42.961625] IC works normally, Write 0x8040 0xAA [ 44.961624] IC works normally, Write 0x8040 0xAA [ 46.961692] IC works normally, Write 0x8040 0xAA [ 48.961687] IC works normally, Write 0x8040 0xAA [ 50.961707] IC works normally, Write 0x8040 0xAA [ 52.961626] IC works normally, Write 0x8040 0xAA