JIO NIDD<-- NIDD CONNECTION REQUEST MADE -->
Failed to Create cfg fileConfig Gen File Create Failedentry : jiot_nidd_prepare_packet Uplink length = 3990x2dca0 uplink_data before return in jiot_nidd_prepare_packet
entry : jiot_nidd_prepare_packet Uplink length = 820x2b850 uplink_data before return in jiot_nidd_prepare_packet
<------------- QuecOpen: JIO NIDD INIT[0] ----------->
Data is {"name":"Parth Prajapati, Dipen Parmar, Vishal Panchal, Rajendra Chhastiya, Harshil Soni, Gavyam gentech ltd"} and length is 110
0x2b748 before jiot_nidd_send
0x2b748 After allocating
0x2b748 in jiot_nidd_send
Before jiot_nidd_topic_formation Function
0x2b5e0
After topic formation
0x2b5e0
0x2b7d0 payLoadData before assign 
0x2b7d0 sendPayload_data->data after assign 
0x2b260 in jiot_nidd_sendPayload_formation function
0x2b260 after jiot_nidd_sendPayload_formation function
Before jiot_nidd_utility_malloc Function
0x2b670 after allocating to nidd_send_param 
Before jiot_nidd_msg_send_formation Function
entry : jiot_nidd_msg_send_formation0x2b670 nidd_send_param in jiot_nidd_msg_send_formation
0x2b7d0 payload in jiot_nidd_msg_send_formation
0x2b5e0 topic in jiot_nidd_msg_send_formation
entry : jiot_nidd_prepare_packet topic jioiot/svc33338280/JNB3150/PANIOTQ948UQYgUs/uc/fwd/events Uplink length = 3370x2b9c8 uplink_data before return in jiot_nidd_prepare_packet
0x2b9c8 data from jiot_nidd_prepare_packet
0 nidd_parmas->payload_msg before return in jiot_nidd_msg_send_formation
0x2b670 nidd_parmas before return in jiot_nidd_msg_send_formation
0x2b670 nidd_send_param after jiot_nidd_msg_send_formation
0x2b670 msg.message after assign
entry : jiot_nidd_send_data0x2b670 nidd_send_param in jiot_nidd_send_data
After Handler Function
sendPayload->data = {"ver":"1.0","pld":"PANIOTQ948UQYgUs","svc":"svc33338280","aid":"A259980558","eid":"11052023","dvt":"JNB3150","dvm":"jvt1440","evt":"EV","evc":"0","ext":{"name":"Parth Prajapati, Dipen Parmar, Vishal Panchal, Rajendra Chhastiya, Harshil Soni, Gavyam gentech ltd"}}
into memfree
<--The module soft reset -->
<------------- QuecOpen: Main App Example ----------->
<------------- QuecOpen: Ql_PSCallback_Register:[0] ----------->
Disable RF
Set PDN type
Enable RF
BEARER_ACTED
<-- Module has registered to network, status:1 -->
AT+QCFG="faultAction",3 [ATResponse_Handler] receData= [
OK
].-->
<-- UartSendATCmd,ret = 0