NMEA protocol MC60 --GSA - is there always presents fix status?

IoT Modules GSM Module
1

Hi,

when MC60 sends NEMA data - for example my device analize --GSA.
Is there always presents fix status 1, 2 or 3 or is it possible that there will not be presents that value ?

Example from Quectel_MC60_Series_GNSS_Protocol_Specification_V1.1.pdf, page 11.
Values what I ask are bold.

Thanks for all help and have a nice day :slight_smile:

$GPGSA,A,3,03,17,11,23,193,3.72,2.85,2.393C
$GNGSA,A,3,23,09,17,03,01,193,1.23,0.74,0.9928
$GLGSA,A,3,68,66,82,67,81,1.25,0.71,1.0310
$GAGSA,A,3,07,1.25,0.71,1.0316
$BDGSA,A,2,10,11,07,3.79,3.65,1.00*18

2

The MC60 currently does not support the NMEA fixed message format output lock configuration function

3

Hi, I thing, that You don’t understand my question :slight_smile:

There is used al-in-one mode in this moment, I send AT+QGNSSRD and I get data with $–GSA.
I’ve asked about fix status. Value 1,2 or 3 is laways presents in NMEA $–GSA data independent of MC60 firmware version ? Thanks for help :slight_smile: