LC29H EA (AliExpres) Firmware update - no reset button

[bamarcant]

@bee

I tried shorten the GND and RST pins. No luck.

Short pin 8 & GND

Firmware Request: LC29HEA Adjustable Update Rate for Ardupilot Utilization

To operate the reset command (for the fw upgrade) on Mozihao boards, you need to ground pin_8 manually only for few seconds until qgnss_flash_tool_upgrade says ok, as the RST_ttl pin is not connected,I used the probe tester. [Reset_Quectel_LC29H_Series_Hardware_Design_V1.2.pdf]