Hello!
I have an issue with EG800Q-EU - can’t move module to full functional mode, it is stuk in airplane.
There is AT CMD log I send:
> ATI
ATI
Quectel
EG800Q-EU
Revision: EG800QEULCR01A11M04
OK
> AT+CFUN?
AT+CFUN?
+CFUN: 4
OK
> AT+CFUN=1
AT+CFUN=1
OK
+QUESTAT:1,1
> AT+CFUN?
AT+CFUN?
+CFUN: 4
OK
After sending the AT+CFUN=1 command, I see the current consumption increase for a couple of seconds. Then it drops again.
Please tell me what could be wrong.
Maybe I should update the firmware?